Products related to Stand-Up Spring Block on 3/4" T-Track Slider, Stainless Steel, 1,000lb. SWL
Stand-Up Spring Block on 3/4" T-Track Slider, Aluminum Cheeks, 1,000lb. SWL from SCHAEFER
Captive liners allow blocks to glide along the track virtually without friction, yet they handle up to 3,500lb. of tension or compression load. They swivel 45° to each side of the track and their patented design prevents blocks from hitting the deck when sheets are flogging. For sails up to 715 sq. ft. and boats to 38’. Bearings: Plain bearing. Shackle/Strap Type: 45° stand-up-spring shackle on T-Track slider. Configuration: Genoa lead block, 1" or 1-1/4" T-Track.
$92.99
|
Snap Shackle from HARKEN
Attaches directly to the shackle post on 2-1/4", 3" and fiddle blocks. Includes a stand-up spring. Snap dimensions: 3/4" x 1".
$77.99
|
Stainless-Steel Genoa Slide for 1" T-Track from SCHAEFER
Die-formed stainless steel, tumbled and polished. Spring pin stop. Includes polyethylene liners .
$64.99
|
6-3/4"L Pop-Up Cleat from TACO PRODUCTS
Spring-loaded cleat pops up with the touch of a button and is corrosion-resistant stainless steel. Includes backing plate.
$197.99
|
304 Stainless-Steel Hose Clamp, 3/4" to 1-1/4", SAE Size 12 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.49
|
6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$67.99
|
304 Stainless-Steel Hose Clamp, 1-3/16" to 1-3/4", SAE Size 20 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.59
|
Drawer Pull-Bent Wire Stainless Steel 3" from WEST MARINE
Marine Grade 304 stainless steel wire pull features a stylish look and easy grip design. Available in sizes ranging in 1/2" increments from 3" to 4" lengths and 8 and 9 mm diameters. Features ample hand clearance.
$13.49
|
304 Stainless-Steel Hose Clamp, 2-3/4" to 3-1/2", SAE Size 48 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.89
|
304 Stainless-Steel Hose Clamp, 4-3/8" to 5-1/8", SAE Size 74 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$1.99
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
$57.99
|
