0° Flush Mount Rod Holder, Stainless Steel from ATTWOOD
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
$44.99
|
Stainless Steel Gas Shock, 20" Extended Length, 10lb. Rating from TAYLOR
Made of corrosion resistant 316 stainless steel for extended service in demanding marine environments. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
$59.99
|
Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Two) from GARELICK
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
$13.99
|
Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Six) from GARELICK
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
$35.99
|
Bimini Jaw Slide, 1", Stainless Steel from TAYLOR
Stainless Steel Bimini Jaw Slide Sold individually.
$23.99
|
Stainless-Steel Base Cover, 12" from TRACY INTERNATIONAL
Cover up old oxidized pedestal bases. These highly polished stainless-steel pedestal base covers fit over your old existing pedestals to give them that “better than new” look. 9" and 12" sizes will fit existing 2 7/8" dia. and 3 1/2" dia.
$62.99
|
Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.
$2.99
|
18" Stainless Steel Flag Pole from TAYLOR
Stainless steel flagstaffs always look grand Quality stainless-steel flag poles clamp or socket mount to fly your colors. Lengths from 18" to 48. " An excellent non-corroding staff for displaying ensigns, courtesy flags and more.
$87.99
|
304 Stainless-Steel Hose Clamp, 5-7/8" to 6-11/16", SAE Size 99 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
$2.19
|
Cabinet Handle, Stainless Steel Bar 25" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
$45.99
|
Stainless-Steel Rub Rail, End, 3/4"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.
$30.1 $18.99
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
$27.99
|
