Products related to Swivel-Eye Snap, Nickel, 1/2" Eye ID, 2-7/8" Length, 1/4" Opening
Closed-Base Cleats - Chromed Zinc 4 1/2", Plastic Base from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$23.99
|
Open-Based Cleats - Chromed Zinc, Plastic Base 4 1/2" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$22.99
|
1" Outlet 1, 1" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99
|
3/4" Outlet 1, 1-1/8" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99
|
5/8" Outlet 1, 3/4" Outlet 2 from MARINE EAST
Unique Design Drains Faster, While Eliminating As Many As Two Unsightly Thru-Hulls Innovative design generates vortex action for faster drainage . 1-1/2" Hose barb at top end with 1 1/2" NPT threads OR barb at bottom. . Side barbs available from 5/8" to 1-1/8" in all combinations . Saves labor and parts . Molded in high-impact super-tough Nylon (S. T. 801) .
$21.99
|
Open-Based Cleats - Chromed Zinc, Plastic Base 6" from PERKO
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included. 4 1/2" long. Requires four #10 FHMS fasteners.
$19.99
|
Rigid Vinyl Rubrail - 1-1/2" H x 7/8" W from TACO PRODUCTS
Rigid vinyl rub rail tightly forms to the boats’ contours and has exceptional lasting qualities in the most adverse conditions. Color and gloss levels matched to gel coats blending rub rail with hull and deck . Requires heat for radius forming . Cuts and drills like wood . Flexible insert covers fasteners and provides a soft, cushioning effect against normal bumps from pilings and docks . Ideal for boats up to 25 feet . Drilled only on 6” centers . Color: WHC. Height: 1-1/2".
$48.99
|
2" Sheave Dia., 2-7/8" x 2-15/16" Base, 1000lb. MWL, 8.4oz. from SCHAEFER
Designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Open race ball bearings allow salt, dirt and debris to be easily flushed out. Single blocks. Maximum line dia: 1/2". Use #10 fasteners. Configuration: Over-the-top lead block. Ball Bearings: Delrin® . Sheave: 7/16" . Line Dia: 7/16" .
$61.2 $61.20
|
2-3/8" Sheave Dia., 2-7/8" x 3-7/16" Base, 1200lb. MWL, 11.6oz. from SCHAEFER
Designed for bringing control lines over the forward edge of cabin houses, coamings or rails. Ball bearing sheaves provide low friction support for lines that need to be bridged or lifted for a clean lead. Open race ball bearings allow salt, dirt and debris to be easily flushed out. Single blocks. Maximum line dia: 1/2". Use #10 fasteners. Configuration: Over-the-top lead block. Ball Bearings: Delrin® . Sheave: 7/16" . Line Dia: 7/16" .
$82.99
|
|
|
Thrd. Stud, 1/2-20, 3/8 Cab from WEST MARINE
**Thrd. Stud, 1/2-20, 3/8 Cab. |**Thrd.
$142.99
|
