Hullgard Primer

• 1 Gal
• Mixed volume 1 US Gallon.
  Theoretical Coverage – 140 Sq. feet/gallon = 3.5 m2/litre at 5.5 mils/135 microns DFT or 360 Sq. feet/ gallon (9m²/lt) at 2 mils/ 50 microns DFT
• Coverage calculations are based on theoretical transfer efficiency of 100%
• Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment
• Recommended Wet Film Thickness: 12 mils (300 microns) per coat by spray, 4 mils (110 microns) per coat by brush/roller
• Recommended Dry Film Thickness: 5.5 mils (135 microns) per coat by spray, 2 mils (50 microns) per coat by brush/roller
• Number of coats: See application instructions
• Anticipated drying time at 77°F/25°C: 2 hours touch dry; 7 hours hard dry
• Recoatability (At 77°F/ 25°C, 50% RH):
  With Itself: 2 hours (minimum)
• Maximum recoat time without sanding 6 months
• Inspection for cleanliness recommended prior to subsequent
  application
• Ensure dust is removed and remove any dirt pick-up with T0006
• If recoatability time is exceeded abrade using 180 – 220 grit paper
• With Antifouling: Minimum 2 hours by brush/roller or 6 hours by spray at recommended film thickness
• Maximum recoat time 7 hours by brush/roller or 16 hours by spray at recommended film thickness
• VOC: Base (D6070) – 391g/lt or 3.26 lbs/gallon

Product Data Sheet