Macerator Pump

Submersible Macerator Pump, 12V from GROCO
Sizes are available to fit any rigid holding tank (36" maximum depth, 1" inch increments), and since waste is macerated BEFORE it leaves the tank, smaller hose and overboard seacock (3/4") may be used in the discharge line.
$469.99

12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. Capable of 13 gpm, the SHURflo macerator also features a high-quality motor with new seamless shell, splash-proof design and rear o-ring shaft seal. New innovative blade design ensures problem free pumping. The inlet port has both a 1. 5" hose barb and 1. 5" male thread to screw directly onto a tank flange. GPM: 13; Self-Prime: 5'. Material: Nylon body, nitrile impeller, stainless wear plate.
$149.99 $154.99

24V Macerator Pump, 8A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
$199.99

24V Macertor Pump, 8A Draw from JABSCO
Now featuring a sealed design, these pumps include run dry protection with a self-priming flexible impeller and stainless-steel wear plate. Self-priming to 5' when wet and grinds waste to 1/8" or smaller. Pumps 12gpm. The inlet port has a 1 1/2" hose barb combined with 1 1/2" male thread to screw directly onto a tank flange. Use 1"–1 1/2" hose adapter (Model 3274123) for 1 1/2" sanitation hose. Material: Nylon body, nitrile impeller, stainless steel wear plate .
$174.99

Macerator Pump Service Kit from JABSCO
Contains seal, body, impeller, two gaskets, two studs, and four fiber washers.
$69.99

Oil Change Pump - 12 Volt from JABSCO
The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge. Pump Body: Bronze. Impeller: Nitrile. Shaft Seal: Buna Lip Type.
$260.00

Tecma X-Light Carbon Fiber Head from THETFORD
Increasingly popular on large offshore racing sailboats where weight considerations reign, this fly-weight carbon-fiber creation delivers ultimate convenience in a high-tech, efficient design. Like other toilets in the Tecma line, a turbine macerator pump immediately macerates waste and pushes it directly to the holding tank. Solid-state, automatic flush cycle with wall-mounted control affords easy, fingertip operation. Type: Electric . Material: Lightweight carbon-fiber bowl, seat and cover.
$9,999.00

Crown Head Electric Head from RARITAN
Crown Head Electric Marine Toilet Classic, proven design; mid-priced electric macerating toilet preferred by boaters since 1965. Reliable, high quality toilet uses sea or lake water. Suitable for demanding boaters who want reliability and low maintenance on any size vessel . Efficient flushing action includes powerful centrifugal macerating pump . Built-in deodorant system . Full-size household-style bowl available in white or bone . Manufacturer's Documentation Crown Head Brochure.
$1,569.00

Macerator Pump Assembly, 24V from JABSCO
37010 Series Electric Toilets Service Parts.
$214.99

Water Circulating Pump - #5850-0001 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$459.99

Water Circulation Pump - #43210-0001 from JABSCO
As the originator of the flexible impeller engine cooling pump, Jabsco has a reputation for quality, reliability and serviceability. These pumps can be fully serviced and restored to like-new condition with a simple service kit, thus avoiding costly replacement.
$529.00