Skip Sand Primer, Qt

Bio-Blue 92 Hull Surface Prep, Qt. from PETTIT
Bio-Blue Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fiberglass surfaces prior to painting. Easy to use formula . Biodegradable with no VOC content .
$17.99

No-Sand Primer from INTERLUX
Speeds up the prepping process prior to application of antifouling paint Eliminates the need to sand fiberglass boats before painting by creating a chemical bond between the fiberglass surface and the first coat of antifouling paint. Quart. Primary Usage: Underwater, bare fiberglass, as tie-coat for bottom paint . Formulation: Underwater fiberglass primer for bottom paint. Applies Over: De-waxed bare fiberglass. to 2 hrs. Number of Coats Recommended: One coat, applied in one direction only.
$43.99

Bio-Blue 92 Hull Surface Prep, Gal from PETTIT
Bio-Blue Hull Surface Prep 92 is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fiberglass surfaces prior to painting. Easy to use formula . Biodegradable with no VOC content .
$62.99

InterProtect® 2000 VOC from INTERLUX
Interprotect® 2000VOC is a unique two part epoxy coating developed to protect new and used fiberglass hulls from water absorption which can lead to poor hull performance and osmotic blistering. Interprotect® 2000VOC has Micro-plates® which create an overlapping barrier to eliminate any direct path for water migration. Interprotect® 2000VOC is also used as a no-sand primer when painting new boats.
$99.99

Rustlok Steel Primer - Quart from PETTIT
Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion resistance. Primary Usage: Trailers and other ferrous metal parts . Applies Over: Steel, cast iron, galvanized and stainless steel . Drying Time: 30 min. Number of Coats Recommended: Three coats minimum . Thinner: 120, Model 249961 . Coverage: 87 sq.
$33.99

Rustlok Steel Primer - Gallon from PETTIT
Easy-to-apply, effective, anti-corrosive barrierOne-part, moisture-cured polyurethane coating locks in and stops the spread of rust on steel, galvanized and stainless steel and cast iron. Forms a dense, waterproof barrier for maximum corrosion resistance. Primary Usage: Trailers and other ferrous metal parts . Applies Over: Steel, cast iron, galvanized and stainless steel . Drying Time: 30 min. Number of Coats Recommended: Three coats minimum . Thinner: 120, Model 249961 . Coverage: 87 sq.
$99.99

6455 Metal Primer - Quart from PETTIT
Provides corrosion and rust-resistance on steel or aluminum. A corrosion-inhibiting pigment keeps the metal surface in good condition and enhances adhesion to metal of primers and topcoats applied over it. Not recommended for wood or fiberglass. Drying, Overcoat: 2-24 hours Thinner: Denatured alcohol Coverage: 400-600 sq. ft. /gal.
$52.99

Easypoxy - Mist Gray, QT from PETTIT
.
$41.99

Vivid White Primer, Gal. from PETTIT
Ideal for use under Vivid bright colored antifouling paint and formulated to reduce water absorption in fiberglass hulls and prevent osmotic blistering. It creates a high film build for maximum protection with fewer coats and also provides exceptional protection for steel, aluminum and other metals.
$114.99

Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
$35.99

Easypoxy - White Undercoater, Quart from PETTIT
Use to fill small surface blemishes and imperfectionsUse as a base coat for Easypoxy enamels when the surface is less than smooth. Can be applied to fiberglass, wood and previously painted surfaces. Dries quickly. Easy to sand. Formulation: One-part high-build primer. Number of Coats Recommended: One or more, depending on surface condition. Drying Time: To recoat: 2 to 16 hrs. Coverage: 100 sq. ft/qt, 400 sq. ft/gal. .
$37.99