Torsion Spring for Sprint 1000 Windlass

H3 GD Horizontal Windlass 24V-3/8 High Test from LEWMAR
The latest generation ‘H Series’ of horizontal windlasses from Lewmar, the H2 and H3 windlasses are designed for boats from 9m (30ft) to 15m (50ft). This saves valuable installation time as it reduces the number of components in the system. In addition the contactor is protected. This has now been combined with a stylish, low profile design that takes up the minimum of valuable foredeck area. Dual direction operation gives total control when both raising and lowering. For vessels 40' to 50'.
$2,699.00

Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
$324.99

Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
$454.99

150 Cam-Matic® Rebuild Kit from HARKEN
Rebuild Kit for Cam-Matic® Cam Cleat includes cam replacement springs, ball bearings, base plate, top caps and instructions. Note: Cam cleats built before 1993 have different baseplates. Cam caps and cam bases will not fit. Replace only balls, torsion springs and washers.
$12.71

Windlass Control Arm Kit, Sprint 1000 from LEWMAR
Control Arm Kits for various Lewmar windlasses.
$9.49

V700 Windlass from LEWMAR
The V700 is a compact, stainless steel windlass designed for power and sail boats. The elegant, low profile design makes windlass an attractive deck accessory. The "FallSafe" gypsy lock takes the load off the gear train while at anchor and also prevents accidental deployment while underway. Includes a heavy-duty, 316 stainless-steel control arm and stripper. Boat Length: to 35' . Rode Type: Rope/chain . Rode Size: 1/4" HT chain, 1/2" rope . Speed Up: 62' (110lb.
$839 $839.00

Pro-Sport Windlass from LEWMAR
An excellent combination of quality and performance in an economical package for rope/chain applications. This anchor windlass features convenient do-it-yourself, above-deck installation and push-button control for easy anchoring. It’s designed around a highly efficient spur gearbox using a smaller, more powerful permanent magnet motor that provides superior line speed, low power consumption. Port side mounted gypsy . Includes up/down toggle switch, 25A circuit breaker and mounting hardware .
$639 $639.00

Pawl Springs, Package of Ten (10) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
$8.29

Sprint 1000 Rope/Chain Fleming from LEWMAR
The Fleming rope is a special rope management system that allows for sure handling of anchor line.
$12.99

Repair Kit (2 Pawls, 4 Pawl Springs, and 2 Retaining Rings) from LEWMAR
Barient may be gone, but you can still get parts from us. Repair kit for small winches typically found on boats under 40ft.
$21.99

4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
$199.99