Water Outlet Fitting

Water Outlet Fitting from PERKO
Chrome-plated bronze fittings with watertight plug and stainless chain. Outlet has a male garden hose fitting; inlet has a female swivel garden hose connector. 1/2" female NPT fitting in back. 2-3/4"dia.
$71.99

Water Inlet Fitting from PERKO
Chrome-plated bronze fittings with watertight plug and stainless chain. Outlet has a male garden hose fitting; inlet has a female swivel garden hose connector. 1/2" female NPT fitting in back. 2-3/4"dia.
$74.99

Spare Water Outlet Cap from PERKO
Chrome-plated bronze fittings with watertight plug and stainless chain. Outlet has a male garden hose fitting; inlet has a female swivel garden hose connector. 1/2" female NPT fitting in back. 2-3/4"dia.
$19.99

Spare Water Inlet Cap from PERKO
Chrome-plated bronze fittings with watertight plug and stainless chain. Outlet has a male garden hose fitting; inlet has a female swivel garden hose connector. 1/2" female NPT fitting in back. 2-3/4"dia.
$15.99

Round Base Rail Fitting from WHITECAP INDUSTRIES
316 stainless steel. 7/8" ID. 90° angle. Base diameter 2-1/2".
$19.99

Gen-Sep Water Separator, 2" Diameter, Gas In/Out 2.0", Water Outlet 1.5" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
$234.99

Gen-Sep Water Separator, 1-1/2" Diameter, Gas In/Out 1.5", Water Outlet 1.25" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.
$214.99

60° Round Base Rail Fitting, 316 Stainless Steel, 7/8" from WHITECAP INDUSTRIES
NOTE: Zamak fittings are recommended for fresh water applications only.
$19.99

60° Round Base Rail Fitting, Chrome-Plated Zamac, 7/8" from WHITECAP INDUSTRIES
NOTE: Zamak fittings are recommended for fresh water applications only.
$13.99

31.7gal. Flexible Water Tank, 41" x 45" x 45" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
$147.99

39.6gal. Flexible Water Tank, 27-1/2" x 55-1/16" from PLASTIMO
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
$167.99