Rule-Mate Fully Automatic Bilge Pumps

Rule-Mate 1100, 12V, 3.4A Draw, 1-1/8" Port, 4.5"H x 5"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$94.99 $84.99

Rule-Mate 500, 12V, 1.9A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$62.99 $49.99

Rule-Mate 750, 12V, 2.7A Draw, 3/4" Port, 4.5"H x 6"W from RULE INDUSTRIES
The new eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch. After the water is pumped out, another sensor shuts the pump off. The sensor's unique "field effect" technology is programmed to recognize the dielectric constant of water only. It's part of Rule's continuing commitment to preserving our waterway. The pumps are preferred by yachtsmen and commercial fishermen the world over.
$84.99 $69.99

2000gph Rule-Mate, 12V, 8.4A Draw, 1-1/8" Port, 6"H x 7-1/4"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$209.99 $209.99

Rule-Mate 1500; Draw: 4.8A @12V DC, Port: 1 1/8", Dimensions: 6"H x 7 1/4"L x 4 1/2"D from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$164.99 $164.99

500gph Rule-Mate, 12V, 1.0A Draw, 3/4" Port, 4"H x 5"W from RULE INDUSTRIES
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
$52.99

EasyFit High with 24V Solenoid, White from THETFORD
Solenoid models (without pump) plumb directly to boat’s pressurized freshwater system. Models with pump draw seawater from outside the boat. Type: Electric . Features: Small footprint with inclined back; automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; programmable water fill . Material: Vitreous china . Draw: 30A @ 12V DC . Port Sizes: With solenoid: 1/2" inlet, 1-1/2" discharge; with pump: 3/4" inlet 1-1/2" discharge .
$899.00

EasyFit Low with 24V Solenoid, White from THETFORD
Solenoid models (without pump) plumb directly to boat’s pressurized freshwater system. Models with pump draw seawater from outside the boat. Type: Electric . Features: Small footprint with inclined back; automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; programmable water fill . Material: Vitreous china . Draw: 30A @ 12V DC . Port Sizes: With solenoid: 1/2" inlet, 1-1/2" discharge; with pump: 3/4" inlet 1-1/2" discharge .
$899.00

(A) Single Vane Puppy Pump from JABSCO
Great for transferring diesel fuel, these pumps feature bronze bodies and vectra rotors and vanes that are not affected by petroleum products. Self-priming to 3' and can pump against a discharge head to 20' On-off reversing switch - great for moving fuel between port and starboard fuel tanks GPM: 5. 5 (fwd), 5. 0 (rev) @0'. Draw: 8. 0A @ 12V DC. Ports: 1" barb, 1/2" NPT, or garden hose inlet & outlet. (A) 6 7/8"L x 4 3/4"W x 3 3/8"H.
$199.99

(B) Reversable Vane Puppy Pump from JABSCO
Great for transferring diesel fuel, these pumps feature bronze bodies and vectra rotors and vanes that are not affected by petroleum products. Self-priming to 3' and can pump against a discharge head to 20' On-off reversing switch - great for moving fuel between port and starboard fuel tanks GPM: 5. 5 (fwd), 5. 0 (rev) @0'. Draw: 8. 0A @ 12V DC. Ports: 1" barb, 1/2" NPT, or garden hose inlet & outlet. (A) 6 7/8"L x 4 3/4"W x 3 3/8"H.
$219.99

EasyFit Low with Water Pump, White from THETFORD
Solenoid models (without pump) plumb directly to boat’s pressurized freshwater system. Models with pump draw seawater from outside the boat. Type: Electric . Features: Small footprint with inclined back; automatic programmable flush cycle with lockout electronics to prevent flushing when tank is full; programmable water fill . Material: Vitreous china . Draw: 30A @ 12V DC . Port Sizes: With solenoid: 1/2" inlet, 1-1/2" discharge; with pump: 3/4" inlet 1-1/2" discharge .
$999.00