Top Sellers
Chain Plate, 1-1/2"W x 14"L, 1/2" Hole Diameter from SCHAEFER
1" and 1-1/4" sizes are flat with four fastener holes. 1 1/2" size is formed (bent) with five fastener holes. Type 304 stainless-steel.
|
Acetal Thru-Transom Scupper from WEST MARINE
Attwood Acetal Thru-transom Scupper One-way rubber flapper valve and thru-hull fitting. For use with 1 1/2'' ID hose. Overall length: 6 1/4'' Installation hole size: 2' Max.
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Swim Grid Outboard Motor Bracket from FULTON
For motors to 10 hp or 75 lb. Anodized marine aluminum alloy. 1 1/2'' polypropylene mounting board.
|
Cotter & Clevis Fastener Kit from WEST MARINE
A 66-piece assortment of cotter rings ranging from 3/8" to 7/8" diameter to fit clevis pins from 3/16" to 3/8"; cotter pins from 1/16" x 3/4" to 1/8" x 1-1/2"; and clevis pins from 3/16" x 3/4" to 3/8" x 1".
|
Ultima Electronic Bilge Switch from JOHNSON PUMPS
The same switch that comes preinstalled on Johnson Ultima Combo Automatic Bilge Pumps. With no moving parts and totally sealed solid state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/deactivates at 2" and 3/4" fluid levels. A three second delay prevents false starts. Rated to handle pumps up to 20 amps at 12V or 24V DC. Activation Method: Solid-state electronic . Dimensions: 2-3/8"H x 2-11/16"L x 1-1/8"D .
|
Mas Gelcoat Repair Kit, Multicolor from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
CP Zinc Elbow Catch from PERKO
Chrome-plated zinc with stainless steel spring. . Measures: 1 1/8" x 9/16" . Requires #6 RH screws (Not included).
|
30mm Synchro Control Block, Double with Becket, 660lb. SWL, 1.8oz. from LEWMAR
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Drain Fitting, 1-1/4" NPT, Straight from AMBASSADOR MARINE
Designed to fit 2-1/16" drain openings, these fittings feature mirror-polished, 304 stainless steel flanges. The slight downward slant of the Low-Profile 90° drain’s hose barb promotes better drainage and unlike some others, it fits standard 1"ID hose.
|
MS-2 Sensor from XINTEX/FIREBOY
Detects propane or gasoline. Second-station sensor for M-2A or a replacement sensor for the MB-1, M-1 or MB-2. Includes 20' plug-in lead.
|
Bruce/Delta Anchor Roller, 15-1/4" Length, 2-1/16" Width; 3/8" (3) Fasteners from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Mercury Outboards, 1965-1989, 1, 2cyl. models, 2-40HP from SELOC PUBLICATIONS
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. SELOC has been the leading source of how-to information for the marine industry since 1974. Step-by-step illustrated keyed procedures guide you through every conceivable job possible, including all adjustments necessary. Accurate specifications and wiring diagrams covers all Gasoline Engines and Drive Systems.
|
|
A, 1, 1 1, 1" from FORESPAR, 2", 2" from FORESPAR, A-Series Round Fender Cover
|
|
Filled with more than 500 color illustrations, this lavish work sketches the history of ocean passenger ships from the 1800s to the 1980s through their images on postcards. A glossary offers information on 170 illustrators. This work is sure to appeal to maritime buffs and those engaged in genealogical research. by Christopher Deakes. 12" x 9-3/4", 160 pages, color illustrations.
Part No: 1039123
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A2B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A2N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A3B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A3N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A4B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A4N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A5B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A5N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A6B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A6N
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A7B
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fender Covers (A-Series, F-Series, HTM-Series & AERE)
Master Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs. They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. The HTM-Series (Hole Through Middle) comes in singles or doubles which are also reversible; they fit Taylor Made Big B™ and SuperGard™ fenders.
Part No: MFC-A7N
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 001110-0815
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002609-1215
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002410-1008
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002410-1012
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpeices
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905104
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpeices
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905103
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpeices
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905102
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpeices
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905100
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Ball Valves & Tailpeices
A. Marelon Ball Valves - High-strength, lightweight glass-reinforced Marelon. After 11,000 duty cycles, they still hold 80psi of air leak-free. B. MarelonTailpieces - Hose barbs on one end. NPS pipe threads on the other. C.
Part No: 905101
|
|
|
|
Home -> Sailboat -> Rigging Products->Splice Lines Lifeline Fittings
Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4" 1x19 cable and costs about the same amount. Johnson advises replacing the line at three year intervals. . Professional splicing recommended.
Part No: LS-2500
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 1900
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-07
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks. Standard, flared, and ferrule versions are available in a range of sizes.
Part No: RF1054
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26403
|
|
|
|
Home -> Safety -> PLBs, EPIRBs, Life Rafts, Survival
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
Part No: JHASB/12/105
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA. RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. Side corners are radius bent, not welded . All tanks-have 1/4" NPT pickup, 1-1/2" fill, and 1/2" vent fittings . All are fitted with plugs for diesel return .
Part No: 59180
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Permanent Fuel Tanks
Light, strong and tested tough, these aluminum tanks are the choice of many boat manufacturers. Built to meet the rigorous standards of the US Coast Guard as well as the NMMA, RDS fuel tanks are built of 5052 aluminum alloy and tested for their ability to retain pressure and withstand motion, impact and fire. before welding, all aluminum parts are bathed in acid to eliminate any contamination that might weaken a weld or create the potential for leakage. Add 3" to height for fittings .
Part No: 59179
|
|
|
