Top Sellers
Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".
|
Whale Gusher 30, Double Action Twin Diaphragm Pump from WHALE PUMPS
Gusher 30 Pump The Gusher 30 is a double-action pump with twin diaphragms so it will still function if one side becomes clogged. Constructed from epoxy-coated anodized aluminum with a brilliant white finish. Nitrile valves and diaphragms perform well under harsh conditions . Accepts low-resistance 2" hose adapters for maximum performance . 31 GPM @ 70 strokes/min. @ 0 head. . Body: Anodized aluminum .
|
Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Thru-Deck Mark V Manual Sanitation Pump from WHALE PUMPS
Reliable, high-capacity pumps for emptying holding tanks, bilges, gray water tanks, etc. Nitrile diaphragms ensure long service life. Offered in Surface-Mount and Universal configurations. Universal design may be surface- or thru-deck mounted—and when mounted thru-deck requires Deck Plate with Ring Kit (Model 182438) to complete installation. 16gpm capacity. Use 1. 5" hose. Type: Manual Diaphragm, bulkhead or thru-deck models . GPM: 14. 75 . Macerates: No .
|
Super Sub Pump 650 Auto, 650gph from WHALE PUMPS
With a low-profile design and horizontal or vertical discharge positions, these versatile pumps are a great choice for narrow/low clearance bilges where others just won’t fit. Twist-lock assembly/ disassembly makes these pumps easy to clean. Following on the heels of the original award-winning design of the Super Sub 500, the new Super Sub 650 features a built-in electronic switch and increased capacity of 650gph. Port Size: 3/4" . Built-in Switch: Super Sub 500: No; Super Sub 650: Yes .
|
Whale Gulper 220 Pump, 12V DC, Draw: 2.4A from WHALE PUMPS
Use this 3. Large 3/4" inlet and outlet valves are cut at 45° angles to minimize flow restriction. Ports rotate to the position you need to facilitate hose connections and it mounts vertically or horizontally—making installation a snap! It can run dry for extended periods without burnout and boasts a large diaphragm that generates up to 13' of lift. Rubber mounting feet reduce noise. Features: Will run dry without damage and pump a mixture of air and water . Large single diaphragm .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Gusher 25 Service Kit from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Service Kit, Gusher 10 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
|
|
|
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
Adaptkit from SIERRA, Additive from SIERRA, 2) from WHALE PUMPS
|
|
Removable Davit Accessories.
Part No: 414
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
.
Part No: WX1532
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
Adptr-. 25innptf-15Mm|Adptr-.
Part No: WX1537B
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
Just cut the tubing to length and fully push the end into the appropriate fitting. The collet automatically secures the hose. If you ever need to alter the system, the connections can be disassembled and reused. All components are manufactured from nontoxic, food-grade materials and are designed to allow unrestricted flow. To gain the advantages of the Whale system, it is not necessary to replumb your entire boat, as unique adapters enable connection to most boat’s existing plumbing systems.
Part No: WX1542
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
Adapter Female 3/8in|Adapter Female 3/8in.
Part No: WX1538
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Water System Fittings
.
Part No: WX1528
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Trailer Light Adapters
Round-to-Flat Adapters convert 4-, 6-, or 7-Way Round pin connector to 4-Way Flat pin connector. Round-to-Round Adapter converts 7-Way Round blade connector to 6-Way Round pin connector. Each adapter easily adapts tow vehicle connector to trailer connector. Full length plug shell ensures positive latching. Non-corrosive nylon shell.
Part No: 3E-A7264
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-Dial Indicatr Adptr Kit|**Tool-Dial Indicatr Adptr Kit.
Part No: 18-9867
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-DriveShaftAdapter|**Tool-DriveShaftAdapter.
Part No: 18-9854
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-DriveShaft Adapter|**Tool-DriveShaft Adapter.
Part No: 18-9868
|
|
|
|
Home -> Engine Systems -> Engine Lubrication->Lower Unit Quart Pump
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
Part No: 3704749
|
|
|
|
Home -> Electronics -> Autopilots -> Below Decks Pilots->GHP 10™ Marine Autopilot System
Garmin made GPS simple for your boat or car, and now they have re-thought the autopilot with this breakthrough product. The GHP 10 marine autopilot provides plug-and-play NMEA 2000 networking for your steering system, with a clear easy-to-use interface, so you can change course by just grabbing the wheel, or you can control the heading of your boat at the press of a soft key. Enjoy the Simple Interface & NMEA Connectivity: The GHP 10 is controlled by the included GHC 10. Style: Below Deck.
Part No: 010-00688-00
|
|
|
|
Home -> Cabin & Galley -> Stoves & Propane System->12V LPG Gas Detection and Control System
In addition to enabling convenient on/off LP gas control from inside your boat, this complete system minimizes the risk of explosion by monitoring your boat for the presence of LP gas in up to three locations. If gas is detected at 10% or more of lower explosion limit (LEL) it automatically turns gas off and activates audible and visual alarms. If gas is detected when the control panel is turned ON, the control switch, green light, solenoid and gas are automatically turned OFF. in alarm mode .
Part No: 1300-7720
|
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
**Additive-Fuel Stabilizer Ga|**Additive-Fuel Stabilizer Ga.
Part No: 18-9080
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Sikaflex 291 Adhesive and Sealent
Great for use in hot, humid climatesAll-purpose, polyurethane adhesive and sealant for use above or below the waterline. Formulation: One-part polyurethane adhesive/sealant. , long assembly time; sealing wood hull seams, thru-hulls, bedding deck hardware . Material Incompatibilities: Acrylic plastics (ABS, Lexan). Adhesion Rating: Tensile: 200 psi; elongation: 700% . Cure Time: Tack free: 3 to 5 hrs; complete cure: 3 to 14 days. Removal: Anti-Bond 2015 (Model 1174804) or mechanical removal .
Part No: 29L241
|
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->Sikaflex 291 Adhesive and Sealent
Great for use in hot, humid climatesAll-purpose, polyurethane adhesive and sealant for use above or below the waterline. Formulation: One-part polyurethane adhesive/sealant. , long assembly time; sealing wood hull seams, thru-hulls, bedding deck hardware . Material Incompatibilities: Acrylic plastics (ABS, Lexan). Adhesion Rating: Tensile: 200 psi; elongation: 700% . Cure Time: Tack free: 3 to 5 hrs; complete cure: 3 to 14 days. Removal: Anti-Bond 2015 (Model 1174804) or mechanical removal .
Part No: 29L243
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive Cable Tie Mounts
Small adhesive pads serve as anchoring points for cable ties when you can't drill a hole. Use with Cable Tie Mounts.
Part No: 375001
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive Cable Tie Mounts
Small adhesive pads serve as anchoring points for cable ties when you can't drill a hole. Use with Cable Tie Mounts.
Part No: 375002
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Adhesive Gorilla Glue
General bonding or repairs in wet or dry applications 15 minutes working time, 90% cure in 3-4hrs, 100% in 24hrs. One-part, 100% polyurethane adhesive.
Part No: 5000205
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Adhesive Gorilla Glue
General bonding or repairs in wet or dry applications 15 minutes working time, 90% cure in 3-4hrs, 100% in 24hrs. One-part, 100% polyurethane adhesive.
Part No: 5000412
|
|
|
|
Home -> Cabinet & Deck Hardware -> Windshields->Installation Foam and Gaskets for Windshield and Hatches
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
Part No: V30-0734B6-1
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
8 mm 25 per package Blue.
Part No: 314325
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Adhesives
The assembly adhesive which also seals! Bonding, Caulking, Bedding , Sealing High Quality, Elastic, one component adhesive and joint filler. It is very suitable for adhesive bonding of different materials in building, for interior construction and for exterior decoration. Thanks to the good initial tack, Flex-Bond 5000 permits uncomplicated and fast assembly. Safety Good adhesion to metallic surfaces even under the action of water. Structural properties. High UV stability. Aging resistance.
Part No: 35-058
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Diner Mugs
Diner Mug The Life is good® Diner Mug is the same old fashioned, heavy duty ceramic model made famous in American diners in the early 1900's. 3.
Part No: 10789
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Heavy-Duty Telescoping Twist-Lock Poles
These telescoping whisker poles are heavy-duty two-section and three-section aluminum spars which can be extended to lengths up to 17' and securely locked in position by an internal twist lock device. Poles feature self-latching Ultra Series™ fittings on the inboard and outboard ends. Aluminum tubing. End Fitting Inboard: UPX. End Fitting Outboard: UPX.
Part No: 407101
|
|
|
|
Home -> Engine Systems -> Engine Parts
5 per package.
Part No: 18-7296-9
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33007A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33010A
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33002
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Adjustable Keel Roller Brackets
Hot dip galvanized brackets hold spool or tapered keel rollers. 17/32" x 5" slots allow for vertical adjustment 5" brackets have slots 3" on center. 8" brackets have slots 6" on center. 10" brackets have slots 8" on center. 12" brackets have slots 10" on center.
Part No: 32003G
|
|
|
