Top Sellers
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Replaces OMC P/N 378444 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
For Chrysler/Force, 89-817109A2 from SIERRA
Many of Sierra's solenoids are manufactured by our Independence, KS plant. We produce both starter solenoids and continuous duty solenoids for trim and tilt pumps. Our features add up to solenoids which offer maximum magnetic plunger pull, reduced voltage drop and maximum corrosion protection.
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Red/Green (for port, starboard and bi-color nav. lights) from DR. LED
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
|
from CAVINESS, from DR, Wrench from SIERRA, 5' from CAVINESS, 2X from STEARNS
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
910
920
930
940
950
960
970
980
990
1,003
1,004
1,005
1,006
1,007
1,008
1,009
1,010
1,011
1,012
1,013
1,014
1,015
1,016
1,017
1,018
1,019
1,020
1,021
1,022
1,023
1,024
1,025
1,026
1,027
1,028
1,029
1,030
1,031
1,032
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,200
1,260
|
|
|
Home -> Boats & Motors -> Oars & Paddles -> Oars->Deluxe Wooden Oars
These beautifully finished, laminated southern hardwood oars are robust and strong, yet light and durable. A wedge insert strengthens the blade tip against splitting and cracking. Varnished with three coats of marine varnish for added life and lasting beauty. With comfortable foam “Power Grip” handles.
Part No: BWSU70
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles -> Oars->Deluxe Wooden Oars
These beautifully finished, laminated southern hardwood oars are robust and strong, yet light and durable. A wedge insert strengthens the blade tip against splitting and cracking. Varnished with three coats of marine varnish for added life and lasting beauty. With comfortable foam “Power Grip” handles.
Part No: BWSU80
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles->Deluxe Wooden Paddles
Varnished paddles are made from laminated southern hardwood and feature a strong cross-grain design which resists splitting and cracking. The palm grip is specially contoured for comfort and efficient paddling.
Part No: R40
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles->Deluxe Wooden Paddles
Varnished paddles are made from laminated southern hardwood and feature a strong cross-grain design which resists splitting and cracking. The palm grip is specially contoured for comfort and efficient paddling.
Part No: R50
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles->Deluxe Wooden Paddles
Varnished paddles are made from laminated southern hardwood and feature a strong cross-grain design which resists splitting and cracking. The palm grip is specially contoured for comfort and efficient paddling.
Part No: R30
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles
These varnished paddles are made from laminated southern hardwood. They feature a strong cross-grain design which resists splitting and cracking. The palm grip is specially contoured for comfort and more efficient paddling.
Part No: R-55
|
|
|
|
Home -> Plumbing -> Fittings & Valves
Provide low-cost insurance against sinking in the event a thru-hull valve or fitting breaks off.
Part No: 47428
|
|
|
|
Keep rods organized with these attractive holders. Not predrilled. Sold in pairs.
Part No: 60614
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Here's a fast-drying varnish you don't have to sand! This easy alternative to conventional varnish is made exclusively for West Marine by Epifanes. Quart. Recommended Usage: Exterior/interior above waterline Formulation: Synthetic wood finishApplication Method(s): Brush, roller or spray (no sanding between coats) Number of Coats Recommended: Bare wood: 5 (maintain as needed) Drying Time: To touch 1-4 hrs. @65°65%RH, recoat 5-6 hrs Color: Clear, slight amber Coverage: 120-150 sq. ft. /750 ml.
Part No: RCCWM.946
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs->Large-Print Waterproof Charts
Not only do these special editions have much larger print but they combine other features which make them much easier to read and use. Larger, clearer “place names” make your destinations easier to find.
Part No: 64E
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Workwear Cargo Bib
Lined with nylon taffeta, hammer loop on right leg, and double layer knee reinforcements. Sized to wear over your existing pants. Large cargo pockets on thigh with hook and loop closure. Gusseted leg opening with snap storm flaps.
Part No: BROWN-2X
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Workwear Cargo Bib
Lined with nylon taffeta, hammer loop on right leg, and double layer knee reinforcements. Sized to wear over your existing pants. Large cargo pockets on thigh with hook and loop closure. Gusseted leg opening with snap storm flaps.
Part No: BROWN-L
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Workwear Cargo Bib
Lined with nylon taffeta, hammer loop on right leg, and double layer knee reinforcements. Sized to wear over your existing pants. Large cargo pockets on thigh with hook and loop closure. Gusseted leg opening with snap storm flaps.
Part No: BROWN-M
|
|
|
|
Home -> Foul Weather Gear & Jackets -> Foul Weather Gear -> Foul Weather Gear->Workwear Cargo Bib
Lined with nylon taffeta, hammer loop on right leg, and double layer knee reinforcements. Sized to wear over your existing pants. Large cargo pockets on thigh with hook and loop closure. Gusseted leg opening with snap storm flaps.
Part No: BROWN-XL
|
|
|
|
Home -> Books & Videos -> Books
Featuring nearly 1000 sailing routes in all oceans of the world World Cruising Routes is a comprehensive guide to nearly 1000 sailing routes covering all the oceans of the world, from the tropical South Seas to the high latitudes of the Arctic and Antarctic. The book is geared specifically to the needs of cruising sailors and contains essential information on winds, currents, regional and seasonal weather as well as valuable suggestions concerning optimum times for individual routes. 628 pgs.
Part No: 007159289X
|
|
|
|
A User’s Guide for the 21st CenturyBased on the eco-friendly website of the same name (www. From disaster relief to sustainable business, community gardens to climate change, it’s full of information from a small army of contributors around the world. New concepts are introduced such as harvesting rainwater and zero-energy houses, what’s happening right now to create an environmentally and economically sustainable future, and what stands in opposition. Divided for easy reference. Abrams, Inc.
Part No: 9780810992962
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Additives & Fiberglass
24 ounce, heavyweight fiberglass repair material can be used with polyester or epoxy resins. For applications where extra strength or large buildup is needed.
Part No: 105190
|
|
|
|
Home -> Paint & Maintenance -> Winterizing & Storage -> Winter Covers
Shrink's Woven cord strapping - 1/2 inch and 3/4 inch widths Used with wooden uprights and buckles to form the support structure under shrink-wrap covers.
Part No: DS-750
|
|
|
|
Home -> Engine Systems -> Engine Parts->Impeller Repair Kits for Outboards
WATER PUMP KIT.
Part No: 18-3240
|
|
|
|
Home -> Watersports -> Tow Ropes & Accessories
Tame cords and lines with reusable wrapsManage your utility cords or two ropes with these 12 long hook and loop wraps. Hook and loop fasteners are sewn to durable 12 x 1 webbing and reinforced with a bar tack at each end. Three per pack.
Part No: WR-123
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-OilFilter Wrench|**Tool-OilFilter Wrench.
Part No: 18-9778
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains
**Tool-Prop Wrench|**Tool-Prop Wrench.
Part No: 18-4459D
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-SpannerNutWrench|**Tool-SpannerNutWrench.
Part No: 18-9803
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-BearingCrrirRtnr Wrench|**Tool-BearingCrrirRtnr Wrench.
Part No: 18-9858
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Tool-Shaft-DriveRtnrWrench|**Tool-Shaft-DriveRtnrWrench.
Part No: 18-9842
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Flexible Diesel Fuel/Holding Tanks Accessories
Shut-off valves, t-fittings, spanner wrenches and other assorted fittings.
Part No: FTP010
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Fishing Hot Spots® Charts
Each Fishing Hot Spots® map is thoroughly researched, the information verified and cartography done digitally, with the most current and accurate GIS tools, to ensure an easy-to-read, accurate and affordable map. It's the map successful anglers have asked for by name for more than two decades. Maps come in a variety of sizes and formats. Each body of water is carefully scrutinized and input is gathered from local experts and consumers as to what needs to be part of the product.
Part No: L714
|
|
|
|
Home -> Engine Systems -> Engine Parts
**Pin-Wrist|**Pin-Wrist.
Part No: 18-42870
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Pin-Wrist|**Pin-Wrist.
Part No: 18-42860
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Tune Up Parts
**Pin-Wrist|**Pin-Wrist.
Part No: 18-4282
|
|
|