Top Sellers
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Gas Deck Fill, Locking from PERKO
Includes grounding lug with screw and integral retainer for cap For 1 1/2" hose Impervious to gasoline.
|
|
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights RailLight charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
1, 1-1, 2-1, 1 yr, 3-1, 1-7, 2" NPT from SEAFIT, 2" Close from SEAFIT, 2" Head
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,077
1,078
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,260
|
|
|
2-Year From 50 To 99. 99|2-Year From 50 To 99.
Part No: 1YR EX 50-99.99
|
|
|
|
2-Year DOP From 850 To 999. 99|2-Year DOP From 850 To 999.
Part No: 1YR DOP 850-999
|
|
|
|
2-Year From 300 To 349. 99|2-Year From 300 To 349.
Part No: 1 EX 300-349.99
|
|
|
|
2-Year DOP Fr 3500 To 3999. 99|2-Year DOP Fr 3500 To 3999.
Part No: 1 DOP 3500-3999
|
|
|
|
2-Year From 350 To 399. 99|2-Year From 350 To 399.
Part No: 1 EX 350-399.99
|
|
|
|
2-Year From 0 To 49. 99|2-Year From 0 To 49.
Part No: 1 YR EX 0-49.99
|
|
|
|
2-Year DOP Fr 1000 To 1249. 99|2-Year DOP Fr 1000 To 1249.
Part No: 1 DOP 1000-1249
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Hose Elbows, Barbed
.
Part No: 357110
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Valves, Deck Fills, Misc.->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: CV-150
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Check Valves
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.
Part No: 290608
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Thru-Hull Intake Strainers
Discourages air locks in your water-intake lines at high speeds. Keeps water flowing at low speeds and debris out at any speed. Includes integral thru-hull fitting. Marine UL-listed.
Part No: STH-1500-W
|
|
|
|
Home -> Sailboat -> Blocks->Line/Wire High-Strength Blocks
Lightweight, low-friction blocks with hi-load composite bearings carry wire halyards and control line cascades. Side load balls minimize friction from twisting or unfair leads on 304. 300s have thrust washers. Cheek blocks come with fasteners. Sheave: Teflon impregnated Hardkote anodized aluminum. Sheave Size: 1" (25mm), 1-1/2" (38mm), 2" (51mm). Line Diameter: 1" sheave - 3/32"; 1 1/2 sheave - 1/8"; 2"sheave - 3/16".
Part No: 305
|
|
|
|
Home -> Plumbing -> Fittings & Valves->PVC Close Nipples, NPT Threaded
PVC Close Nipples, NPT Threaded.
Part No: 419929
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Maxxflow Drains, Barbed
Flush head fits most standard showers and allows complete drainage, decreasing the likelihood of clogging.
Part No: 14142
|
|
|
|
Home -> Cordage -> Rigging Products->Flat Nylon Webbing
Strong, flexible flat webbing in three widths is stronger than polypropylene and less subject to deterioration in sunlight. Sold per foot.
Part No: PE113N
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Acetal Resin Mushroom Heads, Barbed
Plastic, narrow flange, to be used with hose.
Part No: 0301DP8
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Mushroom Heads, Barbed
Not for use below the waterline.
Part No: 0328DP8
|
|
|
|
Home -> Plumbing -> Fittings & Valves->L-Head, Barbed
L-Head Thru-Hulls The outside flange's patented L-shaped, or cyclodial, design and the offset barb provide 300% drainage advantage over other thru-hulls when mounted vertically. Ideal for draining compartments.
Part No: 16710W
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Spare Bronze Flanged Lock Nuts for Thru-Hulls
Designed and built with large surface to distribute load, for longer service life and more reliable connections. Plain bronze finish.
Part No: 65-006-41
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Flush Head, Threaded
Not subject to corrosion due to electrolysis.
Part No: 906008
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906030
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid Nylon Line
Ideal for dock and anchor lines on large boats because its “single-braid” construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it’s immune to kinking or hockling and the 12-strand construction makes Mega Braid a pleasure to handle. Treated with NER’s marine finish, which reduces shrinkage and water absorption and contributes to greater wet strength and abrasion resistance. Stretch: 10% at 15% of breaking strength.
Part No: 1114-50-00600
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid Nylon Line
Ideal for dock and anchor lines on large boats because its “single-braid” construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it’s immune to kinking or hockling and the 12-strand construction makes Mega Braid a pleasure to handle. Treated with NER’s marine finish, which reduces shrinkage and water absorption and contributes to greater wet strength and abrasion resistance. Stretch: 10% at 15% of breaking strength.
Part No: 1110-50-00600
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 45º Elbows, NPT
Assorted sizes.
Part No: 479628
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-907-54
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-1500-S
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tees
Bronze Tees.
Part No: 479638
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Caps
.
Part No: 479668
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 479618
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Elbows
Assorted 90 Degree Bronze Elbows.
Part No: 479608
|
|
|