Top Sellers
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Uni-Fid for Splicing Braid from NEW ENGLAND ROPES
Two sizes make for neater, smoother splices. One fid is for 1/4"–3/8" line; the other is for 7/16" and larger line. Packed in a plastic storage tube.
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
Dual Warning Light and Buzzer from COLE HERSEE
Works with oil pressure, temperature, halon extinguishers, etc Use with grounded or ungrounded switches For use with Marine Engine Warning Alarm Kit Steel case measures 1-7/8"D x 1"W x 1-11/32"H Fits panels to 13/64" thick 12V DC .
|
Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
|
|
|
|
|
|
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.
|
|
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
|
1, 1-1, 3-1, 4" x 4-1, 1-7, 1" Hose ID from SEAFIT, 4" NPT from SEAFIT, 4" Max
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
990
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,079
1,080
1,081
1,082
1,083
1,084
1,085
1,086
1,087
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,260
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Thru-Hull Intake Strainers
Discourages air locks in your water-intake lines at high speeds. Keeps water flowing at low speeds and debris out at any speed. Includes integral thru-hull fitting. Marine UL-listed.
Part No: 65-BN8-12
|
|
|
|
Home -> Plumbing -> Fittings & Valves->PVC Close Nipples, NPT Threaded
PVC Close Nipples, NPT Threaded.
Part No: 419899
|
|
|
|
Home -> Plumbing -> Fittings & Valves->L-Head, Barbed
L-Head Thru-Hulls The outside flange's patented L-shaped, or cyclodial, design and the offset barb provide 300% drainage advantage over other thru-hulls when mounted vertically. Ideal for draining compartments.
Part No: 16410W
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Spare Bronze Flanged Lock Nuts for Thru-Hulls
Designed and built with large surface to distribute load, for longer service life and more reliable connections. Plain bronze finish.
Part No: 65-006-40
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Flush Head, Threaded
Not subject to corrosion due to electrolysis.
Part No: 906006
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906028
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Slotted Hull Strainers with Clean-Out Door
Groco strainers have a unique access door which makes it easy to clear debris and marine growth that can hamper performance and even cause premature failure in water pumps and exhaust systems. Eliminating the need to haul boats out of the water, these strainers can save enormous amounts of time and money in the event of an accident or emergency which requires immediate servicing of the strainer itself.
Part No: ASC-1250
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Perforated Hull Strainers with Clean-Out Door
With removable perforated stainless steel screen and patented access door that permits thru-hull cleaning.
Part No: APHS-1250-1
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid Nylon Line
Ideal for dock and anchor lines on large boats because its “single-braid” construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it’s immune to kinking or hockling and the 12-strand construction makes Mega Braid a pleasure to handle. Treated with NER’s marine finish, which reduces shrinkage and water absorption and contributes to greater wet strength and abrasion resistance. Stretch: 10% at 15% of breaking strength.
Part No: 1114-40-00600
|
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid Nylon Line
Ideal for dock and anchor lines on large boats because its “single-braid” construction allows large diameter line to coil and flake easier than any other line. Extremely flexible when slack, it’s immune to kinking or hockling and the 12-strand construction makes Mega Braid a pleasure to handle. Treated with NER’s marine finish, which reduces shrinkage and water absorption and contributes to greater wet strength and abrasion resistance. Stretch: 10% at 15% of breaking strength.
Part No: 1110-40-00600
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 45º Elbows, NPT
Assorted sizes.
Part No: 479627
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-907-53
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-1250-P
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-1250-S
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Caps
.
Part No: 479667
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tees
Bronze Tees.
Part No: 479637
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 479617
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Elbows
Assorted 90 Degree Bronze Elbows.
Part No: 479607
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Square Head Plugs, NPT
Bronze Square Head Plugs, NPT.
Part No: 479687
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-007-53
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Couplers, NPT Threaded
Nylon Couplers, NPT Threaded.
Part No: 357287
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Plugs, NPT, Threaded
Nylon Plugs, NPT, Threaded.
Part No: 357221
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 357099
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 357098
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 357089
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Spinnaker Pole Ends
Designed for maximum strength and lateral latch support under extreme loads. All-plastic body and metal latch. Well-rounded openings allow for free movement of the guy. The angled latch and hook allow for easy attachment to either sheet or mast eye. Plugs into aluminum tubes size as stated, but ribs can be filed down to accommodate thicker-walled tubes.
Part No: R4230
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Threaded
Marelon 251 Series Full Threaded/Mushroom Head Thru-Hull Connectors Forespar® series of the Thru-Hull Connectors are precision molded in high strength Marelon®. Their great strength, light weight and complete freedom from corrosion and electrolysis make them the ideal Thru-Hull Connectors for use above or below the waterline. All Thru-Hull Connectors must be installed with proper bedding compound. CF 2505 ½), indicates a Thru-Hull Connector that has been fitted with a strainer. Full threaded.
Part No: 906016
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Bronze Mushroom Head Barbed Thru-Hull Fittings
Includes nut For use with hose Not for use below the waterline per ABYC.
Part No: 65-BN7-01
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Flush Head Threaded Thru-Hull Fittings
Bronze Flush Head Threaded Thru-Hull Fittings.
Part No: 0331DP7PLB
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Mushroom Head Threaded Thru-Hull Fittings
Bronze fitting recommended for connections below the waterline Includes nut Marine UL listed (except 1/2" & 3/4").
Part No: 65-BN7-52
|
|
|
