Top Sellers
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
|
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
|
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
Shower/Mixer Faucet Combo from SHURFLO
This shower mixer has a water conservation button built-in to the handle. Chrome-plated with an easy grip handle, ceramic disc valves and 72" retractable hose. Includes flexible 1/2" NPT connection hoses for easy installation. Material: Brass . Dimensions: 6"H x 6-3/8"W x 7-1/4"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" . Cutout Size: 2-1/2". Manufacturer's Documents Installation Guidelines.
|
|
1, 1-1, 2" NPT from SEAFIT, 2" Head, 2" NPT Plug from SEAFIT
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,000
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,088
1,089
1,090
1,091
1,092
1,093
1,094
1,095
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,260
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6591S
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot->HB Poly Utility Braid
UV-stabilized monofilament polypropylene. Available in green. Best Use: Ski ropes, tie downs, crab pots. 5. 5% at 20% breaking strength . Easily spliced .
Part No: 307032506020
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Acetal Resin Mushroom Heads, Barbed
Plastic, narrow flange, to be used with hose.
Part No: 0301DP4
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Plastic Mushroom Heads, Barbed
Not for use below the waterline.
Part No: 0328DP4
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
Chain-Anchr HT ISO HD G40 1/2|Chain-Anchr HT ISO HD G40 1/2.
Part No: 500191626
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Spare Bronze Flanged Lock Nuts for Thru-Hulls
Designed and built with large surface to distribute load, for longer service life and more reliable connections. Plain bronze finish.
Part No: 65-007-65
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->LS & LST Yacht Braid
LS is white 2-in-1™ braided polyester rope with variegated red and green ID in the cover. LST is the same as LS Yacht Braid with the addition of your choice of color tracers in black, red, green, or blue. LS and LST are both good general purpose yacht braids for all applications. Good strength characteristics . Great "hand". Great flexibility and handling . Excellent abrasion resistance . Class I Double Braid .
Part No: 450032005030
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->LS & LST Yacht Braid
LS is white 2-in-1™ braided polyester rope with variegated red and green ID in the cover. LST is the same as LS Yacht Braid with the addition of your choice of color tracers in black, red, green, or blue. LS and LST are both good general purpose yacht braids for all applications. Good strength characteristics . Great "hand". Great flexibility and handling . Excellent abrasion resistance . Class I Double Braid .
Part No: 450032805030
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Flush Head, Threaded
Not subject to corrosion due to electrolysis.
Part No: 906000
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Marelon Mushroom Heads, Barbed
253 Series Hose tailpipe/Mushroom Head.
Part No: 906022
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid II Nylon Line
Developed for use in windlasses, this 12-strand, single braid anchor line is easy to handle and coil. Construction is similar to Mega Braid and it is also enhanced with NER’s marine finish for superior abrasion resistance and strength-retention when wet, making it suitable for docking applications. 1/2" dia. 7,000lb. breaking strength.
Part No: 1134-16-0600
|
|
|
|
|
Home -> Anchor & Docking -> Bulk Nylon & Poly Line->Mega Braid II Nylon Line
Developed for use in windlasses, this 12-strand, single braid anchor line is easy to handle and coil. Construction is similar to Mega Braid and it is also enhanced with NER’s marine finish for superior abrasion resistance and strength-retention when wet, making it suitable for docking applications. 1/2" dia. 7,000lb. break load.
Part No: 1130-16-0600
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot -> Braided Nylon Line->Mega Plait Nylon Line
Non-hockling rope built to survive motor windlass useThe unique braiding process of this 12-strand line results in a non-hockling, six-sided rope that functions well in mechanical, particularly motorized, windlasses. Coils easily . Abrasion and fray resistant. 12% stretch @ 15% breaking strength.
Part No: 1180-16-00600
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->MFP (Multi-Filament Polypropylene) Floatine
Multi-filament Polypropylene Floating Line 2-in-1 braid with a multi-filament polypropylene cover and floating core. Yellow with red ID. A versatile, general purpose line that floats. Soft hand feels like a Dacron double braid. Accepts knots well; doesn't slip. Perfect for dinghy painters. Polypropylene double braid . Floats . Highly visible . Makes great stern tie lines⁄tow lines . Easy knot tying .
Part No: 461032106020
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Paint Brushes, Rollers->4" Mini Roller Set & Replacement Parts
Great for topsides or tight spacesFor hard to reach places, anti-fouling work or topside jobs. The Mini Roller set includes a foam roller, a 1/2" nap roller, mini frame and tray. Refills are two packs. Rolls where standard rollers won't fit. 1/2" nap for heavy application.
Part No: 36026
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 45º Elbows, NPT
Assorted sizes.
Part No: 139824
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-907-50
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-500-P
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-500-S
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tees
Bronze Tees.
Part No: 139834
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 139814
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Elbows
Assorted 90 Degree Bronze Elbows.
Part No: 139804
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Caps
.
Part No: 139864
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139920
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Female Pipe-to-Hose Adapters
Nylon Fittings, Female Pipe-to-Hose.
Part No: 139922
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Square Head Plugs, NPT
Bronze Square Head Plugs, NPT.
Part No: 139884
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Square Head Plugs, NPT
Bronze Square Head Plugs, NPT.
Part No: 139886
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tailpieces
For connecting hoses to valves, seacocks, strainers, and other hardware with NPT pipe threads. Marine UL-listed.
Part No: 65-007-56
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Couplers, NPT Threaded
Nylon Couplers, NPT Threaded.
Part No: 357284
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Plugs, NPT, Threaded
Nylon Plugs, NPT, Threaded.
Part No: 139980
|
|
|
