Top Sellers
|
|
Abandon Ship Dry Bag from WEST MARINE
Store critical safety and survival gear at the ready and keep it protected from wet conditions. Featuring a roll-top dry seal for complete waterproofness, this bag has plenty of room to keep essentials dry, such as a watermaker, EPIRB, instant meals and first aid supplies. Features lanyard, three internal pockets and elastic loops for flares. 30Ltr.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Cant find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
5/16" BBB Chain, 1900lb. SWL, 7600lb. Breaking Strength, 1.2lb./ft., 550' Standard Pack from ACCO CHAIN
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
Johnson/Evinrude Outboard Starter, 120 to 140hp V4 (1985-99), 10 tooth drive gear from SIERRA
Sierra's new and remanufactured starters are the only marine starters that meet Marine UL standards. Sierra's remanufactured starters all have new solenoids, drives, bushings, brushes and springs. The bodies are powder coated for greater corrosion resistance. Sierra has entered an agreement with United Technologies to market their complete line of outboard starters and components. All are 100% load tested . Our remanufactured starters are covered by Sierra's customer satisfaction warranty .
|
Impeller, 18-3062 from SIERRA
Recommended replacement schedule is every 3 years for fresh water and every year for salt water Click to view a Sierra Impeller Application Chart (PDF) For further assistance, have your year & model information handy and call our Product Advisors at 1-800-BOATING.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
|
|
Marine Whistle from WEST MARINE
Keep this powerful, rugged and reliable whistle attached to your PFD. Made for the marine environment, from noncorroding, high-impact plastic. No metal parts.
|
Life Jacket Organizer Bag from WEST MARINE
Keep extra lifejackets contained & easy to find Keep your life jackets readily accessible and protect them from damage while not in use with our bright, sturdy storage bag. We use hook-and-loop closures because zippers in a marine environment tend to freeze-up when least convenient. The fabric is heavy-duty fiber-reinforced vinyl, plainly marked for instant identification in an emergency. Accommodates 4–6 adult life jackets (depending on style).
|
|
1, 800' Standard Pack from WEST MARINE, SWL from WEST MARINE
|
This site contains about 37,903 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,096
1,097
1,098
1,099
1,100
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,264
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stamped Halyard Shackles
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
Part No: 93-42
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->White Sta-Set Polyester Yacht Braid
A perfect balance of stretch, strength, suppleness, abrasion resistance and cost Strong and durable polyester double braid with a braided core and continuous filament braided cover. Cost-effective, long lasting and lots of color choices for simplified sailing. The mainstay of New England Ropes product line. Best Use: All cruising boat applications, racing boat control lines . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Braided polyester Stretch: 2.
Part No: 2100-08-02400
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Silicon Bronze Hex Nuts
Silicon bronze hex nuts in various bagged quantities, threads and diameters.
Part No: 2416
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Hex Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1310
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Hex Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1320
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->Economy Polyester Double Braid
Most economical double braid available, offering some of the benefits of more expensive braids without a high price tag, but will not last as long as higher quality line. Moderate stretch characteristics. All white, with no tracer. Stretch: 3. Construction: Double braid . Core Fiber/Construction: Braided polyester . Cover Fiber/Construction: Braided polyester . 5% at 15% of breaking strength . Best Use: Non-critical applications that do not require low stretch or good abrasion resistance .
Part No: 2190-08-00600
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->Endura 12™ Dyneema Single Braid
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
Part No: 1520-08-00600
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
High quality brass bulkhead fitting.
Part No: 033435-10
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Grade 40 Hot-Dip Galvanized High-Test Chain
1/4IN HIGH TEST CHAIN.
Part No: 500193082
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Galvanized Steel Screw Pin Anchor Shackles
Roughly the same strength as proof coil chain of the same size. To prevent accidental opening, always seize the shackle pin with safety wire. For increased strength, use one size larger than the chain, especially with High-Test chain (the pins will still fit). Meet Fed. Spec. RR-C-271b Type IV Class 1.
Part No: 6587W
|
|
|
|
Home -> Cordage -> Nylon Rope By The Foot->HB Poly Utility Braid
UV-stabilized monofilament polypropylene. Available in green. Best Use: Ski ropes, tie downs, crab pots. 5. 5% at 20% breaking strength . Easily spliced .
Part No: 307016506620
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->High Test Chain
High-test chain, sold by the foot.
Part No: 5013-40471
|
|
|
|
Home -> Engine Systems -> Engine Parts
Application: 1/4" large capacity (for 1/4" fuel line) Replaces: Mercury 35-16494, 35-816296,T, Q.
Part No: 18-7829
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Lap Links
Laps arel ong and tapered for a smooth assembly.
Part No: 4417740
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Shackles
Get quality and excellent value with these precision cast and highly polished 316 stainless steel shackles. Imported. Mfr.
Part No: C0138-0006.
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->LS & LST Yacht Braid
LS is white 2-in-1™ braided polyester rope with variegated red and green ID in the cover. LST is the same as LS Yacht Braid with the addition of your choice of color tracers in black, red, green, or blue. LS and LST are both good general purpose yacht braids for all applications. Good strength characteristics . Great "hand". Great flexibility and handling . Excellent abrasion resistance . Class I Double Braid .
Part No: 450016005030
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->LS & LST Yacht Braid
LS is white 2-in-1™ braided polyester rope with variegated red and green ID in the cover. LST is the same as LS Yacht Braid with the addition of your choice of color tracers in black, red, green, or blue. LS and LST are both good general purpose yacht braids for all applications. Good strength characteristics . Great "hand". Great flexibility and handling . Excellent abrasion resistance . Class I Double Braid .
Part No: 450016805030
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Male/Female 1/4 NPT Brass Elbow.
Part No: 033436-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4 NPT X1/4" Brass hose barb with male threads.
Part No: 033401-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Barb-Fuel 1/4Npt x 5/16 Fm Thr|Barb-Fuel 1/4Npt x 5/16 Fm Thr.
Part No: 033476-10
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Bronze Tees
Bronze Tees.
Part No: 139832
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Caps
.
Part No: 139862
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 139812
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings->Bronze 90º Elbows
Assorted 90 Degree Bronze Elbows.
Part No: 139802
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
Nissan/ Tohatsu 1/4 NPT Chrome Plated Brass Engine Size To 90HP Male Tank Connector.
Part No: 033450-10
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Square Head Plugs, NPT
Bronze Square Head Plugs, NPT.
Part No: 139882
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4 NPT X 3/8" Aluminum hose barb with male threads.
Part No: 033442-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4 NPT X 3/8" Brass Hose barbs with male threads.
Part No: 033405-10
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
1/4 NPT X 5/16" Brass hose barbs with male threads.
Part No: 033430-10
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Nylon Thimbles
Nylon Thimbles.
Part No: 16947
|
|
|