Top Sellers
Marine Formula Sta-Bil, 32oz. from STA-BIL
Marine Formula Sta-BilNew, concentrated formula designed to fight the damaging effects of Ethanol Improves engine performance year-round — not just for seasonal storage.
|
Sta-Bil Gas Stabilizer - 8oz. from STA-BIL
Guards against gum and varnish in fuelKeeps stored fuel fresh indefinitely so your engine will start easily even after being stored all winter. Prevents gum and varnish buildup and protects metal surfaces from corrosion. Use for storing up to 12 months. 8oz.
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
|
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
Flush Cup Door Latch from PERKO
Chrome plated zinc alloy with sliding lock button. For door thickness 3/4 to 1-1/8 inches. Supplied with black plastic spacer for surface mounting. Bevel/Strike Type: Regular w/Box. Case Dimensions: 2-1/8 x 1-3/4 .
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
|
|
Rechargeable Signal Air Horn from TAYLOR
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
|
from HARKEN, Single from LEWMAR, 4"H from LEWMAR, 8" from GUEST, from STA-BIL
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,010
1,020
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,101
1,102
1,103
1,104
1,105
1,106
1,107
1,108
1,109
1,110
1,111
1,112
1,113
1,114
1,115
1,116
1,117
1,118
1,119
1,120
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,260
|
|
|
Home -> Plumbing -> General Purpose Pumps->Impeller Kits
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
Part No: 10077K
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Panel-Mount Circuit Breakers
Overload protection for your windlass and your boat’s electrical system. Also function as main power switches.
Part No: SPA-10100W
|
|
|
|
Home -> Electrical -> Batteries & Accessories -> Battery Switches & Cable
Combined with the 701 selector switch, this combo ensures you will always have a fully charged reserve battery. When the switch is in position 1, it becomes the sensing battery for the VSR. Battery 2, which is in isolation, will be charged via the VSR when the engine is running ensuring it is always fully charged. The fact that there is always a fully charged battery in reserve is a huge safety factor. Interchangeable labelling system allowing a full range of applications. Engines: Single .
Part No: 714-100A
|
|
|
|
Home -> Electrical -> Batteries & Accessories
Designed for twin outboards without AUX alternator outputs. It allows the port engine to charge the port start battery and the house battery when the VSR is engaged. Allows the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine.
Part No: 717-100A
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Seats
Inflatable Boat Seats.
Part No: SSL430200
|
|
|
|
Home -> Fishing -> Fishing Accessories->Taco Outrigger Accessories
Shock cords. Glass eyes. Mesh bags.
Part No: COK-0008B-1
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: P0100
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP100
|
|
|
|
Home -> Sailboat -> Blocks->100mm Black Magic® AirBlocks®
Used on offshore boats where weight and performance are critical. The 100mm range features free-rolling, large-diameter aluminum sheaves with Torlon roller bearings housed in a unique center cage. UV-resistant carbon-black Delrin balls carry sideloads. Blocks are Hardkote anodized and have 17-4PH stainless headposts and shackles. Easily disassembled. Ball Bearings: Torlon® Roller Bearings. Carbon-black Delrin® ball bearings . Sheave Size: 4" (100mm) . Line Dia: 5/8" max.
Part No: 3199
|
|
|
|
|
Home -> Sailboat -> Blocks->100mm Black Magic® AirBlocks®
Used on offshore boats where weight and performance are critical. The 100mm range features free-rolling, large-diameter aluminum sheaves with Torlon roller bearings housed in a unique center cage. UV-resistant carbon-black Delrin balls carry sideloads. Blocks are Hardkote anodized and have 17-4PH stainless headposts and shackles. Easily disassembled. Ball Bearings: Torlon® Roller Bearings. Carbon-black Delrin® ball bearings . Sheave Size: 4" (100mm) . Line Dia: 5/8" max.
Part No: 3007
|
|
|
|
|
Home -> Sailboat -> Blocks->100mm Black Magic® AirBlocks®
Used on offshore boats where weight and performance are critical. The 100mm range features free-rolling, large-diameter aluminum sheaves with Torlon roller bearings housed in a unique center cage. UV-resistant carbon-black Delrin balls carry sideloads. Blocks are Hardkote anodized and have 17-4PH stainless headposts and shackles. Easily disassembled. Ball Bearings: Torlon® Roller Bearings. Carbon-black Delrin® ball bearings . Sheave Size: 4" (100mm) . Line Dia: 5/8" max.
Part No: 3008
|
|
|
|
|
Home -> Sailboat -> Blocks->100mm Black Magic® AirBlocks®
Used on offshore boats where weight and performance are critical. The 100mm range features free-rolling, large-diameter aluminum sheaves with Torlon roller bearings housed in a unique center cage. UV-resistant carbon-black Delrin balls carry sideloads. Blocks are Hardkote anodized and have 17-4PH stainless headposts and shackles. Easily disassembled. Ball Bearings: Torlon® Roller Bearings. Carbon-black Delrin® ball bearings . Sheave Size: 4" (100mm) . Line Dia: 5/8" max.
Part No: 3012
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Ultra Cold Coolers
Our popular ice chest keeps your drinks ice cold longer! Made by Igloo exclusively for West Marine. Compared to other traditional coolers, these coolers have 25% more insulation in body and lid for ultra cold retention. Hold ice up to five days in 90°F heat! Odor-resistant, refrigerator-quality liner helps keep coolers clean and fresh. Surelock® 95 hinges hold lid open for easy access. Include threaded drain plug for hose hookup. All parts replaceable. Material: Polyethylene. Handles: Two.
Part No: 13319
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Gale Sail
The safest and easiest way to hoist a storm jib in heavy conditions. Simply furl the genoa sheets down to the deck and yank the Gale Sail over the furled headsail, attach its sheets and hoist it with a spare halyard or the spinnaker halyard. Eliminates the need for a removable headstay. No need to unfurl, lower and pack the genoa to hoist the storm jib. The Gale Sail is a heavy-duty storm jib that can be flown either by itself, or in combination with the reefed mainsail or trysail.
Part No: GS100
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Replacement Bulbs for Aqua Lights Underwater Lights
**AquaLight Bulb 175W Halide W|**AquaLight Bulb 175W Halide W.
Part No: AL100BH
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Underwater Lights
Powerful, long-lasting underwater lights Sturdy and powerful Aqua Lights™ underwater lights are constructed with the highest quality materials— heavy-duty naval bronze housings made with extremely thick walls and borosilicate glass lenses—for decades of performance. The Mega Blaster delivers a dazzling 180000 lumens from its huge 600 watt Metal Halide bulb, protected by 1/2"-thick lens. 5A of 120V AC power (you'll need an inverter). Halogen and Xenon bulbs operate for 600 to 900 hours.
Part No: AL100H
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives -> Caulking Compounds
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
Part No: 06510
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents
Awlgrip 1010 Flattening Agent for Urethane Topcoats Gallon.
Part No: OG3013/1GLUS
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil
Apply this sealer to bare wood before paintingSeals wood before application of varnish or enamel. Prevents cracking and plywood checking. Not for use with two-part polyurethane or epoxies. Quart. Recommended Usage: Seals plywood to prevent checking or cracking. Promotes even paint and varnish absorption . Application: Brush, roll, conventional/airless spray . Number of Coats Recommended: Two/three coats, depending on porosity. Drying Time: Overcoating: 8 to 16 hrs. Coverage: 50–100sq.
Part No: Y1026/QT
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->1030 Micro Case
Pelican™ 1030 Micro Case is part of our Micro Case Series™, a range of cases to protect your valuable small items. With the Micro Cases you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. A Pick 'N' Pluck™ foam insert is available for additional protection.
Part No: BLACK-ONE SIZE FITS ALL
|
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->1030 Micro Case
Pelican™ 1030 Micro Case is part of our Micro Case Series™, a range of cases to protect your valuable small items. With the Micro Cases you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. A Pick 'N' Pluck™ foam insert is available for additional protection.
Part No: BLUE-ONE SIZE FITS ALL
|
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage->1030 Micro Case
Pelican™ 1030 Micro Case is part of our Micro Case Series™, a range of cases to protect your valuable small items. With the Micro Cases you will be able to protect your cell phone, photographic camera, Personal Digital Assistants (PDA), electronic games, pager, radio, and other valuable small items. Micro Cases will totally protect your valuables, as they are watertight, crushproof and have an automatic pressure purge valve. A Pick 'N' Pluck™ foam insert is available for additional protection.
Part No: YELLOW-ONE SIZE FITS ALL
|
|
|
|
Home -> Engine Systems -> Engine Lubrication -> Fuel Additives
Want optimal performance out of your high performance engine? Look no further than 104+ Octane Boost. 104+ Octane Boost provides the performance and the protection you need to keep your high performance vehicles running like new. 16 Fl. Oz. Boosts Power!. Improves Gas Mileage. Cleans Fuel Injectors & The Complete Fuel System. Reduces Knocks, Pings and Hesitation. Safe for Catalytic Converters and Oxygen Sensors.
Part No: 10410
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056510
|
|
|
|
Home -> Sailboat -> Blocks
Lewmar's Synchro blocks are more efficient, less expensive Lewmar's Synchro blocks combine geometry, sheave ratios and a unique free spin bearing, to deliver performance that’s comparable to ball and roller bearing blocks used in pro racing—at a more affordable price. Synchro blocks provide the optimal ratio between line size, sheave diameter and the interface between rope and sheave. This new range of blocks transforms performance, not only by improving efficiency, but also speed and handling.
Part No: 29921051
|
|
|
|
Home -> Engine Systems -> Engine Parts
For use with pumps R50G, R30G and E05.
Part No: 10996
|
|
|
|
|
Home -> Engine Systems -> Engine Parts
For use with pumps R50G, R10997 and R00870G.
Part No: 10997
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Charge Pro Weather-Resistant Battery Chargers
Components are sealed in a corrosion-proof thermal epoxy Guest fixed-mount on-board chargers fit applications ranging from weekend boating to high-stakes tournament fishing. These light-weight, rugged, fully potted units are water resistant, shockproof, vibration proof, and impervious to rust, corrosion and caustic gases. Three-stage chargers extend the life of your battery by keeping it fresh and ready to go. Status Indicators: State of charge LED indicators . Input Wiring: 6 AC power cord .
Part No: 2611A
|
|
|
|
Hayward Fishing trolling weights can be used with all makes of down-riggers.
Part No: HDRRC-10
|
|
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295184
|
|
|
