Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
|
15, 15-1, 15' 1 1, 15-3, 4" x 15" Thunderbolt Propeller from MERCURY MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,030
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,121
1,122
1,123
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,260
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->T-900 Technora-Dyneema Double Braid
More than twice as strong as regular polyester braid, it’s a great choice for any low-stretch application including afterguys, genoa sheets, halyards, spinnaker sheets, running backstays. The Technora/Dyneema core combines the best of both fibers: durability, light weight, no moisture absorption, no creep. Extremely strong, low stretch, and durable. 8% at 15% of breaking strength. Choose red, blue, or green flecks with a fine red and blue tracer The same low-stretch properties as white T-900.
Part No: 2750-14-00600
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->V-100 Vectran Double Braid, White
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2800-14-00600
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Quicksilver Evinrude/Johnson Outboards Propellers
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
Part No: QA3038R
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Drum Bearing Kits
This kit contains: 1 Drum bearing.
Part No: 48000454
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Cap & O-Ring Kits
Spare Winch Cap & O-Ring Kits.
Part No: 48000443
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Gray Jaw Kits
This kit contains: 1 Upper crown. 1 Lower crown. 1 Stripper ring. 3 Fixing screws. 3 Springs.
Part No: 48000447
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551615
|
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551715
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321492
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601150
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATM Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 603915
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATM Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 603930
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATO/ATC Automotive-Style Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 604015
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Slow-Blow MDL Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 602150
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
43. 00"L x 15. 00"W x 6.
Part No: 031615
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Black Diamond Modular Propellers
Black Diamond Modular Propellers A general-purpose aluminum prop that is inexpensive and easy to repair, recommended for speeds less than 50mph and for engine applications lower than 250hp.
Part No: QA2008X
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5005X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5004X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Black Diamond Modular Propellers
Black Diamond Modular Propellers A general-purpose aluminum prop that is inexpensive and easy to repair, recommended for speeds less than 50mph and for engine applications lower than 250hp.
Part No: QA2014X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5007X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5006X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5003X
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Thunderbolt Stainless Propellers
A good choice for sport/performance style boats, cruisers and offshore boats, Thunderbolt stainless props are outstanding on MerCruiser Bravo One and TRS stern-drives.
Part No: QS5002X
|
|
|
|
Home -> Fishing -> Rods -> Spinning Rods
The Mariner Series, Stand up style and Boat rods, are unique among solid glass rods. The tapers are comparable to more expensive tubular blanks, but miraculously without breakage issues. Lighter than other glass-blank rods, the Mariner is a trusty choice for either style angler.
Part No: 0009-1154
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926113
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling -> Air Conditioning->EnviroComfort Reverse-Cycle Self-Contained Air Conditioners
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
Part No: 207400310
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->EnviroCool Self-Contained Air Conditioners
capacities to accomodate boats in the 25–40 foot range. These systems use R-417A refrigerant, an environmentally safe, green gas. Outstanding features include high-velocity motors with no overhang for a compact footprint plus a stainless-steel drain pan and pre-installed return air filter that can be easily removed and cleaned. Systems come complete with a seawater pump plus all the pieces and parts you need (from seawater intake to supply air grille) for a professional installation. models.
Part No: 207444309
|
|
|
|
Home -> Fishing -> Fishing Accessories->West Track Outrigger Systems
Includes choice of 15'L Premium Telescoping outriggers, matching size TigerFish I or II Top Mount Holders, Deluxe Rigging Kit and mesh carry bag.
Part No: 88905-1
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Premium Telescoping Aluminum Outrigger Poles
Cold-drawn aluminum tubing provides maximum strength, while duplex anodization enhances durability and looks. Both the black/gold and the silver/black poles include color trim rings and stainless-steel line guides and feature a stainless-steel snap button for a positive lock-in position. Includes heavy-duty plastic storage bag. Cold-drawn aluminum tubing for maximum strength. Duplex anodization enhances durability and looks. Includes heavy-duty plastic storage bag.
Part No: 88904
|
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Outriggers->Premium Telescoping Aluminum Outrigger Poles
Cold-drawn aluminum tubing provides maximum strength, while duplex anodization enhances durability and looks. Both the black/gold and the silver/black poles include color trim rings and stainless-steel line guides and feature a stainless-steel snap button for a positive lock-in position. Includes heavy-duty plastic storage bag. Cold-drawn aluminum tubing for maximum strength. Duplex anodization enhances durability and looks. Includes heavy-duty plastic storage bag.
Part No: 88905
|
|
|
