Top Sellers
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Triple, 1/2" - 9/16" Line Dia., 59.6oz from LEWMAR
Allows controlled release under loadThe award winning D2 Rope Clutch, built for big boat applications, allows for an easy and controlled release even at full holding power. Instead of just jamming the rope, the D2 clutch's Domino Cluster mechanism has a longer holding pattern for better grip and less rope wear. Fits line sizes from 5/16" (8mm) to 9/16" (14mm). Application: High load applications on boats to 55', low load and control lines on larger boats . Safe Working Load: 2650lb.
|
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
|
16, 16-1, 16 Gauge Primary Wire, 1, Pk from ANCOR MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,124
1,125
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,260
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories -> Replacement Bulbs->Replacement Lamps
Keep spare bulbs handy in case of burnouts or breakage. Please note: Picture represents only straight tubes.
Part No: 529406
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49016000
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49016030
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->16 Amp PowerCord Plus® Cordset with Female Connector and IEC 60309 Male Plug
Same features as the Marinco PowerCord Plus® Marine Cordset, with 2. 5mm2 Harmonized cable and IEC 60309 Male plug (Plug Ratings: 2P+E [6H], IP44 splash resistance, 16A/230V).
Part No: 10MSPPXP
|
|
|
|
|
Home -> Electrical -> Shore Power -> Electrical Cordsets->16 Amp PowerCord Plus® Cordset with Female Connector and IEC 60309 Male Plug
Same features as the Marinco PowerCord Plus® Marine Cordset, with 2. 5mm2 Harmonized cable and IEC 60309 Male plug (Plug Ratings: 2P+E [6H], IP44 splash resistance, 16A/230V).
Part No: 15MSPPXP
|
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49016001
|
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49016032
|
|
|
|
Home -> Electrical -> Electrical Wire -> Duplex Wire->Duplex Wire, Mini Packs
White jacket over a black and a red conductor. Wire Type: Duplex . Construction: Tinned Copper . Conductors: One Black, One Red . Color of Exterior Insulation: White .
Part No: 189503
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102010
|
|
|
|
|
Home -> Electrical -> Electrical Wire -> Primary Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182003
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102110
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182103
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102210
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102310
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182303
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182503
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102610
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102810
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182803
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 102910
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 182903
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 103010
|
|
|
|
|
Home -> Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 183003
|
|
|
|
Home -> Sailboat -> Blocks->16mm AirBlocks®
AirBlocks have a lightweight design and a unique patented bearing system which uses stainless steel balls in a captive, grooved race. Very high working loads in an extremely lightweight block, with the best strength-to-weight ratios around. Sheave: Delrin. Sheave Size: 5/8" (16mm). Ball Bearings: Stainless. Line Diameter: 7/32" max.
Part No: 467
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Surface SKYScreens
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.
Part No: SFSS-1070-W
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 311399
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 311303
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 311225
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 311203
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 311425
|
|
|
