Top Sellers
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Safe-T QC Helm from TELEFLEX
For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Single Station. Boat Type: All stern drive, inboard, and power-assisted applications. Steering Type: Rotary Safe-T quick helm. Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H. Steering Wheel: Up to 16". Not included. Steering Wheel Shaft: 3/4" tapered. Cable Type: QC II (SSC62). Mounting Hardware: Included.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
|
1, 8"W from HARKEN, 5" Length from SEAFIT, 6" Length from SEAFIT
|
This site contains about 39,187 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,040
1,050
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,126
1,127
1,128
1,129
1,130
1,131
1,132
1,133
1,134
1,135
1,136
1,137
1,138
1,139
1,140
1,141
1,142
1,143
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,300
1,307
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 457011
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.2M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.2M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.2M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2721.1.2M
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601015
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->1.5 Heavy-Duty Wiper Motor
Powers a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination. Fully sealed powdercoated aluminum waterproof base and housing. RF shielded circuitry. Factory pre-set sweep angles of 80° or 110° with easy adjustments of 45° or 60°. 12V electrical system. Two-speed motor. Style: Interior/Exterior . Sweep Direction: Both . Self-Parking: Yes . Case Material: Aluminum . Draw: No-load current 0.
Part No: 71012
|
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->1.5 Heavy-Duty Wiper Motor
Powers a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination. Fully sealed powdercoated aluminum waterproof base and housing. RF shielded circuitry. Factory pre-set sweep angles of 80° or 110° with easy adjustments of 45° or 60°. 12V electrical system. Two-speed motor. Style: Interior/Exterior . Sweep Direction: Both . Self-Parking: Yes . Case Material: Aluminum . Draw: No-load current 0.
Part No: 71082
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts and Service
Heads need to be properly maintained to ensure proper functioning Genuine Sealand parts Maintenance kitsTreatment kits.
Part No: 385341513
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 458031
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 458041
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 458051
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 458061
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 459011
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 458011
|
|
|
|
Home -> Fishing -> Fishing Accessories->Grand Slam Top Mounted Outrigger & Accessories
Bolt down mount operates from under your top and features 12 locking fishing positions and lay-down arm. Look for Outrigger Ready Tops with pre-drilled mounting plates on Century, Cobia, Triton, Mako and many other fishing boats. Tele-Outriggers store easy, reduce stress to your gunwale and retract to pass under bridges. The Grand Slam Kits with Tele-Outrigger include a pair of Grand Slam Top Mounts, a pair of 15' Tele-Outriggers, Premium Rigging Kits and outrigger carry bag. Sold in pairs.
Part No: GS-350H-90
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks
Highly polished cast brass . 1-1/2" L (measured from centers of mounting bases).
Part No: 370010
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.5M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.5M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.5M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2721.1.5M
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Fridge / Freezer Combos
CoolMatic CR Compressor Refrigerators Tropical-rated with Danfoss compressor and separately insulated freezer compartment.
Part No: 74802.010.00
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1616.1.8M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Midrange Traveler Track & Accessories
Midrange track is available in low-beam or high-beam configurations. Use high-beam track to span a cockpit or other unsupported area. Choose between variable hole spacing and drilled track. Holes in metric drilled track are on 100mm centers. Use 1/4” (6mm) FHMS fasteners. End stops sold separately. Add 1522 or 1523 Heavy Duty End Stops (sold in pairs, fasteners not included) when end control assemblies are not used. Low-beam track measures 9/16" (14mm)H x 1 1/16" (27mm)W.
Part No: 1618.1.8M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2720.1.8M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Small Boat Traveler Track & Accessories
Accepts all Harken Small Boat cars. Use low-beam when track is supported at each fastener hole. High-beam can span unsupported areas. Holes on 100mm centers.
Part No: 2721.1.8M
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2972-02-00100
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2976-02-00100
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Spyderline by the Foot
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. Best Use: Performance dinghy cascade systems and control lines Construction: Double braid Cover Fiber/Construction: Polyester braid Core Fiber/Construction: Dyneema SK-75 braid Stretch: 1.
Part No: 2972-02-00500
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Spyderline by the Foot
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. Best Use: Performance dinghy cascade systems and control lines Construction: Double braid Cover Fiber/Construction: Polyester braid Core Fiber/Construction: Dyneema SK-75 braid Stretch: 1.
Part No: 2976-02-00500
|
|
|
