Top Sellers
|
|
Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.
|
|
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Replacement Element for Mercury Inboards/Outboards, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
|
|
Nibo Quick Dog, Right-Locking with Hardware from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
|
Smoked Lexan MR10 for Hatch Lens Replacement from GE
Offered in a "smoked" tint, Lexan MR10 is excellent for hatch lens replacement. This material is mar-resistant and like the LexanXL10, it features a 10 year limited warranty covering abrasion resistance, yellowing, loss of light transmission and coating failure. Dimensions: 24"L x 24"W x .
|
|
10" OneTouch, 10" Lock-In, 10" Replacement Handle
|
This site contains about 39,187 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,144
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,300
1,307
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Super-Roller Polyurethane Rollers
Resilient, shock-absorbent, non-marking Super Rollers are made from high-quality polyurethane to protect your investment. They spin freely to reduce drag while launching or retrieving your boat and remain uneffected by oil, gas or salt. Should last the lifetime of your trailer. Made in the U. S. A. Types Keel Rollers (Spool and Tapered). Self-Centering Roller. Wobble, Smooth. Side Guide.
Part No: RP-10
|
|
|
|
Home -> Sailboat -> Winches->LiteTouch Winch Handles
Designed for complete ease of use, the LiteTouch allows you to push the release button and unlock in one quick, easy motion—all with one hand. What makes the LiteTouch so unique is that it is made of buoyant composite material. In other words, it floats. LiteTouch also features the world’s only replaceable drive lug and locking system, with a Power Grip handle for easy one- or two-handed operation, with a bright yellow cap for easy spotting. Material: Reinforced buoyant composite .
Part No: 29140036
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Ball-Bearing Winch Handles
Ball bearings allow fast, free cranking. Comfortable grip. Fits most common winches built today. Grip: Ball bearing (Double-grip Model 5252689) . Type: Locking or standard . Material: Aluminum .
Part No: B10AL
|
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Ball-Bearing Winch Handles
Ball bearings allow fast, free cranking. Comfortable grip. Fits most common winches built today. Grip: Ball bearing (Double-grip Model 5252689) . Type: Locking or standard . Material: Aluminum .
Part No: B10ADL
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B10ASG
|
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->SpeedGrip Ball Bearing Winch Handles
SpeedGrip handles use a ball bearing knob on the top of the grip to allow much faster grinding under low loads, and more powerful two-handed grinding under high loads. A Harken exclusive. Grip: Ball-bearing double, with ball-bearing top. Type: Locking .
Part No: B10CSG
|
|
|
|
Home -> Paint & Maintenance -> Tools -> Hand Tools
With tough, drop-forged chromium-molydbendum jaws and precision, machined teeth, these locking pliers include a rubber-covered end on the release lever for finger-friendly operation.
Part No: 15232
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->Primary Floating Winch Handles
Titan winch handles won’t break your wallet or chip your gel coat. These models give you a lighter, stronger and more buoyant handle. Glass-filled nylon handle halves are welded together for extreme stiffness. Comfortable grip. Material: Glass-filled nylon. Grip: Single. Type: Floating.
Part No: 29145311
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->Marine Speakers & Subwoofers
Made of mica-polypropylene, these marine speakers are built for added protection against the elements associated with boating. Subwoofers are available in 8” and 10” sizes and are designed to withstand vibration, temperture changes as well as exposure to moisture and salt air. Each handles up to 400W of peak power for thick, powerful bass Style: Flush mount . Impedance: 4 ohms . Cone: Mica-polypropylene woofer with santoprene surround; 1" titanium PEI tweeter . Magnetic Shielding: Yes .
Part No: CMQ2510W
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140048
|
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140046
|
|
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140044
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6208WM
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6203WM
|
|
|
|
Home -> Sailboat -> Tiller & Rudder->Radar Pods
Manufactured from thermoformed uPVC. Allows for 1 x Radar with 7" screen color version .
Part No: 89400205
|
|
|
|
Home -> Electronics -> Radars->Power Mount Plus Radar Antenna Mounts with Light Bar Option
Light, strong and attractive mounts for your radar scanner Seaview's Power Mounts make it easy for you to raise your radar above shipboard obstructions. Stylish anodized and powder-coated aluminum oval-shaped struts are a great choice for mounting radars on arches or cabin tops. They offer 20° aft leaning profiles and all accept the optional Universal Light/GPS Mount, WM #6966006. When selecting a mount, be sure your radar brand matches the mount description as bolt patterns vary.
Part No: PMA-10R-7L
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Trailer Winches->Manual Trailer Winch Replacement Handles
Manual Trailer Winch Replacement Handles.
Part No: 6817P01
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks->Stainless-Steel Yacht Cleats
Sleek, modern design makes decks look stylish while providing the ultimate in corrosion protection when anchoring or docking.
Part No: 233777
|
|
|
|
Home -> Ventilation -> Vents -> Exterior Vents->Flexible PVC Cowl
These vents are a great way to supplement solar or 12V ventilating systems, and they are commonly used as bilge ventilators with or without a powered blower. The soft, flexible PVC is safer than metal or other types of rigid vents because it deforms if accidentally stepped on, then springs back to shape. Includes Cycolac deck ring and cap. The Deluxe Low Profile vent has a stylish red interior. Included Equipment: Cycolac deck ring & cap . Installation Hardware Required: #8 fasteners .
Part No: N10964
|
|
|
|
Home -> Electronics -> Radars->Standard Power Mounts
Stylish airfoil-shaped struts that raise the antenna above shipboard obstructions. Power Tower compact bases fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the strut and the antenna. A hole/rubber grommet is provided for easy internal routing of cables. These mounts are not Light Bar–compatible; Power Mount Plus Radar Antenna Mounts have Light Bar Option (see WM #6965800). . Raymarine mounts fit the 2kW and 4kW Pathfinder domes .
Part No: PMF-10R-7
|
|
|
|
|
Home -> Electronics -> Radars->Standard Power Mounts
Stylish airfoil-shaped struts that raise the antenna above shipboard obstructions. Power Tower compact bases fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the strut and the antenna. A hole/rubber grommet is provided for easy internal routing of cables. These mounts are not Light Bar–compatible; Power Mount Plus Radar Antenna Mounts have Light Bar Option (see WM #6965800). . Raymarine mounts fit the 2kW and 4kW Pathfinder domes .
Part No: PMF-10U-7
|
|
|
|
Home -> Paint & Maintenance -> Tools
Manufactured to ANSI standards, with drop-forged vanadium alloy steel, precision, machined teeth and comfortable, two-material cushion grips.
Part No: 15151
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Universal Bi-Color Pole Lights
Based on Attwood’s popular Pulsar Pole Lights, these stowaway bi-color lights feature convenient universal plug-ins with locking collars that allow you to activate or remove the light quickly and easily—great for bass boats and flats boats with bow platforms.
Part No: 5092-10-7
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Lights->Universal Bi-Color Pole Lights
Based on Attwood’s popular Pulsar Pole Lights, these stowaway bi-color lights feature convenient universal plug-ins with locking collars that allow you to activate or remove the light quickly and easily—great for bass boats and flats boats with bow platforms.
Part No: 5095-10-7
|
|
|
|
|
Home -> Electronics -> Radars->Power Mount Plus Radar Antenna Mounts with Light Bar Option
Light, strong and attractive mounts for your radar scanner Seaview's Power Mounts make it easy for you to raise your radar above shipboard obstructions. Stylish anodized and powder-coated aluminum oval-shaped struts are a great choice for mounting radars on arches or cabin tops. They offer 20° aft leaning profiles and all accept the optional Universal Light/GPS Mount, WM #6966006. When selecting a mount, be sure your radar brand matches the mount description as bolt patterns vary.
Part No: PMA-10U-7L
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Evinrude/Johnson Outboards Propellers
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
Part No: QA3118R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Quicksilver Evinrude/Johnson Outboards Propellers
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
Part No: QA3122R
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Hatch Accessories->Replacement Stainless Steel Bug Screens for Bronze or Stainless Ports
Replacement bug screens for your polished bronze or stainless steel ports.
Part No: 134009
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2180R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2190R
|
|
|
