Top Sellers
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
Scotchgard Marine Liquid Wax, 1Liter from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
Wet/Dry Sandpaper (AO) - P500A-Grit from 3M PRODUCTS
3M Imperial Wetordry Sanding Sheet, 9" x 11" Used in wet sanding, fine featheredging or last final sanding step before priming. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product. 500G.
|
101 Polysulfide Marine Sealant - White, 10 OZ from 3M PRODUCTS
Adhesive/sealant for a wide variety of materialsOne-part polysulfide product seals joints between similar and dissimilar surfaces wood, fiberglass, metal and glass above and below the waterline. Non-sagging, non-shrinking and permanently flexible. Excellent resistance to weathering. White. Recommended Usage: Seals mechanically fastened joints, above or below water; fiberglass, wood, metal, most plastics. Cure Time: Tack free: 5 hrs; complete cure in 14-21 days; remains permanently flexible.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
|
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
|
High Gloss Gelcoat Compound Gallon from 3M PRODUCTS
Leaves a high gloss finish without wheel or swirl marksRemove fine scratches from production gel coat. Unique formulation reduces slinging while buffing and leaves a high gloss finish without wheel or swirl marks. Contains no wax or silicone.
|
|
Pk from ANCOR MARINE, 4" from BOMAR, 1-1, 4" from 3M PRODUCTS
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,145
1,146
1,147
1,148
1,149
1,150
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R15T
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R15S
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R15P
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> General Fasteners
A complete selection of popular phillips pan and oval head tapping screws. #6 x 1/2", 3/4", &1". #8 x 1/2", 3/4", 1", 1 1/4", &1 1/2". #10 x 1/2", 3/4",1", 1 1/4",1 1/2" & 2".
Part No: KP5579W
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->216 Special Thinner
Versitile thinner speeds drying in cold climatesFast-evaporating solvent improves drying in cold climates and facilitates spray applications. Excellent for removing sanding residue, wiping bare aluminum and general cleanup. Quart or gallon.
Part No: Y216/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Thinners & Solvents->216 Special Thinner
Versitile thinner speeds drying in cold climatesFast-evaporating solvent improves drying in cold climates and facilitates spray applications. Excellent for removing sanding residue, wiping bare aluminum and general cleanup. Quart or gallon.
Part No: Y216/QT
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Marine Fine Line Tape #218
For an ultra-sharp edge, use this tapeFor fine-line enamel applications. Stretches for contours. Recommended Usage: Bootstripes, paint borders; cleanest color line separation . Material: Polypropylene film backing . Removal Time: 24 hrs .
Part No: 04700
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Marine Fine Line Tape #218
For an ultra-sharp edge, use this tapeFor fine-line enamel applications. Stretches for contours. Recommended Usage: Bootstripes, paint borders; cleanest color line separation . Material: Polypropylene film backing . Removal Time: 24 hrs .
Part No: 06303
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Striping Tape
For fine-line applications. Stretches for contours. 24-hour removal.
Part No: 06301
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper
For fine-line applications, stretches for contours 24-hour removal 60 feet.
Part No: 06300
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Masking Tape And Paper->Marine Fine Line Tape #218
For an ultra-sharp edge, use this tapeFor fine-line enamel applications. Stretches for contours. Recommended Usage: Bootstripes, paint borders; cleanest color line separation . Material: Polypropylene film backing . Removal Time: 24 hrs .
Part No: 06305
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed typesa 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-37
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39922030
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 310325
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 310303
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 310225
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Waterproof Ring Terminals
A short length of adhesive shrink tubing creates a waterproof wire termination. Style: Ring . Conductor Material: Tinned Copper . Wire Attachment Method: Crimp tool and heat . Insulation Type: Nylon shrink .
Part No: 310203
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 210303
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 230303
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 230301
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 210302
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Nylon Flanged Spade Connectors
Brass sleeve crimps onto wire for additional strain relief. Grooved barrel grips wire for superior holding power. Tinned copper. Nylon insulated.
Part No: 230302
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Nibo Low Profile Aluminum Hatches
Original equipment on many boats, including Bayliner, Wellcraft, Carver and Silverton, these super low-profile hatches are constructed of anodized, heavy-duty aluminum and tough, smoked acrylic. No sharp corners to snag lines. Supplied completely assembled. Screen and trim ring optional. Type: Deck Hatch Material: Anodized heavy-duty aluminum frame, smoked acrylic lens. Hinges: Heavy-duty hinges with stainless steel supports. Included Accessories: None, optional screen and trim ring .
Part No: N1039-10A
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17222
|
|
|
|
Home -> Engine Systems -> Control Systems->600A Control Cables
.
Part No: CC17922
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Pro Front-Mount Outboard Hydraulic Steering System
Recommended for single non-power-assisted outboards up to 300hp. The easy-to-install Sea Star PRO kit is built using the same components used in factory boatbuilding. The kit includes a 2. 0 PRO HH5770 helm, semi-universal front mount HC5345 cylinder, two quarts of oil and an installation guide. Kit can be used with jackplates (allow enough hose length for full steering motion and no interference during trim and tilt) and performance props. Match the helm with Kevlar reinforced HO57XX hoses.
Part No: HO5722
|
|
|
|
Home -> Engine Systems -> Steering Systems->QC II Steering Cables
Single station cable assembly, push/pull action. Direct replacement for SSC62 and SSC72 cables. Fits old style (i. e. , threaded) Safe-T, Big-T, Safe-T Quick Connect and NFB Rotary helms.
Part No: SSC6122
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R24T
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: R24S
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Heavy-Duty 1600, 2200 & 4000 GPH Pumps
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
Part No: 22004
|
|
|