Top Sellers
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Hot Foot Throttle Omc/Merc from T-H MARINE
Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables. Aluminum pedal. Stainless hardware. Non-stick bearing surfaces.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
|
|
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
|
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
Folding Step from SEADOG
Handy when you need it, but out of the way when you don't! Projects just 13/16" when folded. Chrome-lated brass wtih a stainless steel spring.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
|
26, 8" from PLASTIMO, 4"H from LEWMAR, 26' Control Cable from TELEFLEX
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,060
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,151
1,152
1,153
1,154
1,155
1,156
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Hoyt Jib Boom™ Systems
Proven on over 1,000 sailboats and numerous trans-oceanic passages As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom maintains precise control of the jib’s leach. This results in remarkable performance improvement and ease of handling. This is not a critical location, but rather a rule of thumb. All knuckles are bent to 57 degrees. All angles are calculated on a perfectly flat and level deck. Wedges will be required on many installations to make up for deck camber.
Part No: 313101
|
|
|
|
Home -> Fishing -> Reels->BaitRunner Spinning Reels
The Baitrunner Lever with tension adjuster gives you exceptional free-spool control, making it a cinch to guide live bait straight to your target. At the same time, this brawny spinning reel provides the speed to power lures directly into the strike zone. Line capacity: 230/25lb. Yds.
Part No: BTR-4500B
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Micro-Captive Ball Traveler Cars & Track
Strong, lightweight, solid aluminum, one-piece cars boast stainless steel-wire ball guides that keep the high-strength Torlon balls captive when the car is off the track. Sculpted car bodies reduce weight. Low-profile Micro CB track is fully-saturated Hardkote–anodized for toughness and scratch-resistance. Low-profile, line-shedding endstop absorbs sudden shock loads that can occur during unintentional jibes. Application: Mainsheet cars. Vangs on small dinghies. Controls on small keelboats.
Part No: 2720.2.5M
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME2512-U
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Underwater Lights
Powerful, long-lasting underwater lights Sturdy and powerful Aqua Lights™ underwater lights are constructed with the highest quality materials— heavy-duty naval bronze housings made with extremely thick walls and borosilicate glass lenses—for decades of performance. The Mega Blaster delivers a dazzling 180000 lumens from its huge 600 watt Metal Halide bulb, protected by 1/2"-thick lens. 5A of 120V AC power (you'll need an inverter). Halogen and Xenon bulbs operate for 600 to 900 hours.
Part No: AL250MH
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Watertight, epoxy-painted thermoplastic housing with two 100,000cp halogen sealed beam lamps. Bulbs tilt inside housing, maintaining the sleek appearance. Includes two-speed panel-mount remote control and 25’ wiring cable. Beam Strength: 100,000cp Lens Diameter: 2" x 5" Case Material: Thermoplastic Case Dimensions: 11"D x 8. 75"H x 10.
Part No: 60010-2012
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners
A complete selection of popular phillips pan and oval head machine screws with matching nylock nuts, hex nuts and flat washers. 8-32 x 1/2", 3/4", 1", 1 1/2" & 2". 10-24 x 1/2", 3/4", 1", 1 1/2" & 2".
Part No: KP5582W
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass -> Putties, Sealers, Misc
For above-the-water surface prep before paintingFast-drying compound fills fastener holes and gouges. Fairs up minor imperfections on bare wood or fiberglass. Sands easily. Don‘t apply over painted surfaces. Don‘t thin. Pint. Formulation: One-part above-water putty . Recommended Usage: Filling fastener holes and minor imperfections on bare surfaces . Drying: To touch: 30 min. to 1hr. ; sandable: 1 to 3 hrs.
Part No: Y257/PT
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Includes 110 assorted 22-10 Heat Shrink Butt Connectors, 145 assorted 16-10 Ring Terminals, 1 single Crimp Ratchet Tool and 1 mini Butane Pocket torch (butane not included).
Part No: 320001
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056505
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Super Hooker Pivoting Fluke Anchors
An economical "lunch hook" and spare anchor Strong steel pivoting fluke anchors are built to original Danforth dimensions and are ideal for holding in sand or mud in protected waters. Non-tapered shank, fully welded crown and L-shaped flukes. Hot dip galvanized. Style: Pivoting steel fluke . Material: Galvanized steel . Our most affordable fluke-style anchor. Cons: Lacks the strength of premium models. Not reliable for overnight holding or for use in grass, rocks or clay.
Part No: 95055
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Performance2 Anchors
We believe we actually improved on several aspects of the original designs of Bob Ogg and Richard Danforth. Our compact crown assembly provides low penetration-resistance and keeps the fluke angle at a precise 32° with a rugged, die-stamped crown and shank engagement. The characteristics we did not change include the ''T'' section flukes for symmetry and strength, high-strength 4130 steel flukes, shank and crown and quality galvanizing without flakes or sharp spikes of zinc.
Part No: 94075
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->HD & Super HD Digital Radar Scanner Cables
HD & Super HD Digital Radar Scanner Cables for the next generation, SeaTalk network-compatible open array digital radar systems for Raymarine E-Series and G-Series.
Part No: A55079D
|
|
|
|
Home -> Electronics -> Antennas, Mounts, Cable->Radome Cable
**15M Heavy Radome Cable|**15M Heavy Radome Cable.
Part No: E55066
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Open Array Antenna System Components
Compatible with C- and E-Series Displays Compatible with Raymarine C-Series, E-Series and hsb2 Radar displays. A low receiver noise figure (less than 5 dB) enhances target reception. Advanced signal processing enhances small targets and eliminates clutter caused by rain and sea conditions automatically. There is no need to constantly adjust dials to get the best picture. For added safety, two user-defined guard zones trigger an audible alarm should any target cross the guard zone boundary.
Part No: E55064
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
A great addition to any existing Orion signal kit or the base to build your own signal kit when combined with Orion Locate signals. Converter sleeve allows you to launch 12 gauge meteors. Included bandolier holds up to 7 meteors. Corrosion resistant construction.
Part No: 583
|
|
|
|
Home -> Safety -> Flares & Signaling Devices
Replaces all Orion 25MM signals. 50% brighter than 12 Gauge HP signals. Exceeds USCG requirements. Approved for day or nighttime distress signals. 7-second burn time. 30,000 candlepower. Pack of four. Signal Type: Red Meteor Flare. Light Output: 35,000 candlepower. Burn Time: 7 seconds. Average Altitude: 375'.
Part No: 589
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Cap & O-Ring Kits
Spare Winch Cap & O-Ring Kits.
Part No: 48000444
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Solar Panels->Folding Solar Panels
Uses include connection to NiCad or NiMH battery chargers to keep small AA, AAA or D-size batteries topped off as well as connection to your car or boat’s battery to make sure it is always ready to start your engine. The durable nylon thin film design works under cloudy or rainy skies. Includes battery clamps, 12V female outlet, cigarette lighter adapter, barrel plug connector and 8ft. power lead. Panel Material: High efficiency, thin film CIGS (copper indium gallium diselenide) solar cells.
Part No: 22020
|
|
|
|
Home -> Engine Systems -> Fuel Tanks -> Portable Fuel Tanks
29. 25"L x 19. 00"W x 12.
Part No: 031526
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Voyager Series Stainless-Steel Hatches
Durable and smooth high-grade 316 stainless-steel hatch with extruded aluminum base. Models with cutout sizes greater than 16-1/2" x 16-1/2" have a unique spring arm that allows them to open 180°. Patented locking tiedown assembly. 3/8" smoked acrylic lens. Type: Deck hatch . Material: 316 stainless lid, extruded aluminum base, smoked acrylic lens . Latches: Adjustable latches with locked vent position . Included Accessories: None; optional screen and trim ring .
Part No: S2648-10AXX
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Flexible Water Tanks
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
Part No: 18033
|
|
|
|
Home -> Engine Systems -> Control Systems->600A Control Cables
.
Part No: CC17926
|
|
|
|
Home -> Engine Systems -> Steering Systems->SeaStar Outboard Hose Kits (two hoses per kit)
Easy installation, and made to fit most single/twin outboards A popular choice for unmatched comfort and control of your outboard, this steering system offers smooth and efficient steering for all hull types. Use with single outboards up to 300hp and dual outboards up to 600hp total. i. displacement helm pump, semi-universal front-mount cylinder, two quarts of oil, bleeder kit and installation guide. Order the popular HK6300 kit complete with set of two 22' hoses, or purchase hoses separately.
Part No: HO5726
|
|
|
|
Home -> Safety -> Fire Extinguishers->Manual Release Cable Kits
Select length according to application Includes stainless-steel cable, pull handle, safety pin, panel mount escutcheon plate, tie and instructions.
Part No: E-4209-26
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Mechanical Steering->QC II Steering Cables
Single station cable assembly, push/pull action. Direct replacement for SSC62 and SSC72 cables. Fits old style (i. e. , threaded) Safe-T, Big-T, Safe-T Quick Connect and NFB Rotary helms.
Part No: SSC6126
|
|
|
|
Home -> Sailboat -> Sailboat Canvas -> Winch Wheel & Acc. Cove->Commodore™ Wheel Hide Cover Kits
Hide covers add a touch of luxury to a stainless steel or aluminum wheel and increase the comfort and pleasure of helming.
Part No: 89700120
|
|
|
|
Home -> Sailboat -> Tiller & Rudder -> Rudder & Wheel Hdwr->Stainless Dished Destroyer™ Wheels
These 5-spoke wheels are the latest addition to Edson’s line of Destroyer™ Wheels. Attractive, dished shape and newly-styled, straight hub. Tapered, hollow spokes. Lightweight 1" ovalized grip tubing is the industry standard for smooth wheel steering. 1" bore fits most Edson wheel shafts. Requires Wheel Nut fastener.
Part No: 645ST-26-5
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->HDI™ Inflatable Fenders
Durable, high-density materials and assembly are the benchmarks of this fender. Quality, space-saving inflatable fenders in popular standard sizes to match most all needs. Each is a marvel of structural integrity and has been subjected to extreme testing to assure its ability to withstand heavy marine use.
Part No: MF-HDI 2665
|
|
|
|
Home -> Sailboat -> Rigging Products->Stanchions
Heavy-duty 1'' stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16'' diameter. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16'' welded rod reinforcement doubles as a bail for snatch blocks, etc. . The gate brace mounts midway up the stanchion and has a welded base canted 60° to offer additional support at gate openings.
Part No: 36-07
|
|
|
