Top Sellers
500gph 12V Bilge Pump, 3/4" Port, 1.9A Draw, 2.5A Fuse, 3-1/2"H x 2-3/8"W from RULE INDUSTRIES
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
|
12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
|
|
3, 3" x 9, 12V from BALMAR, 3-Way Panel Switch from RULE INDUSTRIES
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,157
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Safety -> Man Overboard Gear
Includes a fiddle block, a single block with carabiner, 65' of 3/8" dacron braid and a nylon storage bag.
Part No: W-TACKLE 3:1
|
|
|
|
Home -> Plumbing -> Fittings & Valves->3-Way Bronze Ball Valves
Use in place of a "T" fitting to switch between two tanks.
Part No: 70-603-10
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->3-Way Bronze Ball Valves
Use in place of a "T" fitting to switch between two tanks.
Part No: 70-604-10
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule "fail-safe" spring return to "off" from the "manual" position.
Part No: 43
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Multiple Tank Draw Valves
Connect multiple permanent tanks to a single engine. Provides withdrawal from one tank at a time, and provides anti-siphon protection. Meets ABYC H-24 fire test. NPT threaded female ports. Model 9398918 includes click-stop detents.
Part No: 033305-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Multiple Tank Draw Valves
Connect multiple permanent tanks to a single engine. Provides withdrawal from one tank at a time, and provides anti-siphon protection. Meets ABYC H-24 fire test. NPT threaded female ports. Model 9398918 includes click-stop detents.
Part No: 033302-10
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Multiple Tank Draw Valves
Connect multiple permanent tanks to a single engine. Provides withdrawal from one tank at a time, and provides anti-siphon protection. Meets ABYC H-24 fire test. NPT threaded female ports. Model 9398918 includes click-stop detents.
Part No: 033312-10
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has red indicator light and fuse holder.
Part No: 41
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Bilge Pump Switches
Similar to the Lighted Panel Switch but without indicator light or fuse holder. The "manual" position has a "fail-safe" spring return to "off" so you can't leave your pump running by accident.
Part No: 45
|
|
|
|
Home -> Electrical -> Flashlights & Batteries
Three AAA batteries required . Built-in ON/OFF switch . Snap ON/OFF battery cover . Super lightweight . Cool to the touch . Velcro mounting strips included . 3 LEDs. Black case. 2. 40" x 1. 78" x 1.
Part No: 005-5000-7
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Hoister Four-Point Lift System
Is your garage so packed full of stuff that there’s no room for the car? The Harken Hoister stores car-top recreational craft like kayaks, dinghies—even truck caps—up and out of the way. A self-locking, ball bearing block system prevents accidental release, even if you drop the line, so you can hoist or lower large items onto your car by yourself. There’s also one for a bike (Model 2043008). 8.
Part No: 7801
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Aqua King Automatic Pressure Water Pumps
Built to withstand the rigors of the marine environment, these pumps feature robust, non-corroding, electro-coated, seamless motor shells, long-life ball bearings and sealed switches for years of trouble-free service. They run quietly, are self-priming and may be run dry without damage. Built-in thermal protection means they won't overheat and their safe, ignition-protected design offers great peace of mind. Material: Polypropylene body, nylon base plate . Port Sizes: 1/2" male NPS .
Part No: 3901-0216
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Aqua King™ Automatic Pressure Water Pumps
Ideal for tight spaces where larger tanks won't fit, this tank is designed to maintain waterline pressure and reduce unwanted pump cycling—which helps to keep the pump cool and extend its life. Incorporates a butyl rubber diaphragm in a nylon housing to maintain pressure for years. Material: Nylon . Capacity: 24fl. oz. . Pressure: 125psi . Port Sizes: 1/2" NPS male . Dimensions: 4. 8"H x 3. 8"W x 9.
Part No: 3901-1216
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->PAR-Max Washdown Kits with Hose
Offered in 3gpm, 4gpm and now in whopping 7gpm capacities, these kits make seagoing cleanups a snap. 0 Kit is the one to get if high capacity and power are what you need. Pumps feature built-in pressure switch and sealed glass-filled polypropylene or nylon casing for long-life in wet environments. Convenient Snap-Fit hose fittings (one pair 90° and one pair straight) make plumbing easy. Kits also include Pumpguard™ inline strainer, pistol-style nozzle and 25' self-coiling hose. Ultra 7.
Part No: 32901-0092
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 60-70-SR-IG
|
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 60-100-SR-IG
|
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6-Series Alternators
Balmar’s newest 6-Series alternators combine the best of traditional Balmar quality with technology that’s more universal and user-friendly than ever. Isolated Ground terminals are now standard, improving the system ground and noise reduction. 6-Series alternators utilize dual internal fans and an open frame case design for improved alternator cooling. A universal crown assures an easy fit on most modern engines. Model 621 alternators replace 1” single foot or 2" single foot alternators.
Part No: 60-120-SR-IG
|
|
|
|
Home -> Safety -> First Aid & Medical
This well-stocked, purpose driven medical kit offers a wide variety of first-aid necessities. The kit includes a substantial wound care section including hospital quality wound closure strips and an irrigation syringe for washing out cuts. Also includes A Comprehensive Guide to Wilderness & Marine Medicine by Eric A. Weiss and Michael Jacobs. Meets or exceeds all Coast Guard recommendations for non-commercial watercraft and meets ISAF Offshore Special Regulation 4. Number of Pieces: 124.
Part No: 2062-0006
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->TS Series Socket Ends
Aluminum fitting automatically locks onto the mast toggle pin.
Part No: 309031
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Chocks And Bitts->Line Chocks
Fasteners not included.
Part No: 950001
|
|
|
|
Home -> Plumbing -> General Purpose Pumps->PAR-Max Washdown Kits with Hose
This compact high-pressure pump features a powerful 3. 5 gpm flow rate to blast mud and silt from your anchor chain and deck. Waterproof design includes coated motor and sealed pressure switch. Thermal overload protection automatically stops the motor if it overheats. Comes with Pumpgard filter, trigger nozzle, and snap-in ports. Self-priming up to 10 ft. Connections for 1/2" ID hose. 12V DC. 10 amp fuse. 8. 6"L x 4.
Part No: 32305-0092
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->RCA to 3.5mm Jack
Cable designed to connect your H20 audio series waterproof case to your boat's audio system.
Part No: Q3-1A1
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
The DE-0041's self-venting, under counter design is ideal for smaller galleys but still features an exceptionally quiet compressor, low amp draw (2. 8A @ 12VDC), large freezer compartment and increased interior capacity. Improved interior illumination. Right hinged reversible door and adjustable shelves and oor bins . Two-year warranty . 3. 6 cu. ft. capacity . 30-7/8" x 23-1/4" x 23-1/2" cutout size . Reflective insulation board .
Part No: DE0041R
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Sensor Max VSD Water Pumps
Versatile pumps feature variable speed control, solid state pressure sensor and nearly silent operation with no cycling. Controls pressure by changing motor speed and speeds up as demand increases. Self priming to 10' and able to run dry without damage. No accumulator tank needed. Operates on 12V or 24V DC. Switch Type: Pressure sensor controlled with no pressure switch . Self-Prime: 10' . Material: Glass-filled polypropylene . Port Sizes: 1/2" hose or 1/2" Qest thread .
Part No: 31750-0000
|
|
|
|
Home -> Sailboat -> Blocks->Series 55 Orbit Block™ Accessories
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. Sheave: Carbon-fiber reinforced, PTFE-impregnated engineered nylon. Bearings: High-compression–strength Carbon Black Acetal; Stage 2 Bearing: Glass fiber-reinforced, MoS2-impregnated engineered nylon. Sheave Size: 2-5/32" (55mm).
Part No: RF-9005-10
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2977-04-00050
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Spyderline by the Spool
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. It is flexible, yet firm enough to be led through small leads, micro blocks and purchase systems and is also a great choice as sail ties for the performance Opti sailor. Best Use: Performance dinghy cascade systems and control lines . Core Fiber/Construction: Dyneema SK-75 braid .
Part No: 2979-04-00050
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Spyderline by the Foot
Very low stretch with a variety of uses This spiderweb sized, high-performance line has a Dyneema SK-75 core inside a polyester double braid cover that provides superior strength for its tiny diameter. Best Use: Performance dinghy cascade systems and control lines Construction: Double braid Cover Fiber/Construction: Polyester braid Core Fiber/Construction: Dyneema SK-75 braid Stretch: 1.
Part No: 2972-04-00300
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Fridge / Freezer Combos
CoolMatic CR Compressor Refrigerators Tropical-rated with Danfoss compressor and separately insulated freezer compartment.
Part No: 74802.010.60
|
|
|
|
Coolmatic RD series refrigerators are a terrific value. They operate using a Danfoss BD35F compressor, which lends the following: steady, quiet-running operation with minimum power consumption. Operates on either 12V DC or 24V DC, with automatic switchover. Switches over to 115V AC when 12V/24V DC is unavailable. Door mounts on left or right, for installation flexibility . >Door locks at both top and bottom, to secure contents . Additional features include spacious freezer compartments .
Part No: RSD-1115U/F
|
|
|
