Top Sellers
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
|
|
Flush-Mount Water Regulator/Inlet from SHURFLO
This combination water regulator, entry screen and check valve with Shurflo’s exclusive diaphragm design provides continuous protection from pressure surges. Pressure will not exceed 50psi. For installation on bulkheads of any thickness. Made of chromed plastic. 4-3/4" x 4-3/4" x 3-3/4".
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .
|
|
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
Anode Kit - 818298Q 1 from MERCURY MARINE
Mercury/MerCruiser Anodes and Anode Kit - VPN - - Description - - Fits - A 31640Q 4 Trim Tab Anode Fits most Mercury/Mariner outboards 35 hp. & above and all MerCruiser except Bravo. & above and all MerCruiser except Bravo. C 806189Q 1 Trim Cylinder Anode Fits Alpha One Gen II drives. D 806190Q 1 Trim Cylinder Anode Fits Bravo I, II, III, X, XR, XZ and Blackhawk drives. F 826134Q Side Pocket Anode Fits Mercury/Mariner 30-300hp outboards, Force 90 & 120hp 1995 and newer outboards.
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
3, from HARKEN, from TAYLOR, 3" Block, 3" Bow Stop (ULT-3) from STOLTZ
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,158
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Detachable cooling unit with 5‘ supply line, fully hermetic Danfoss BD35F compressor with integrated control electronics, low-voltage protection for consumer or starter battery, electronic fuse/automatic reverse pole protection, dynamically ventilated lamellar condenser, aluminum rollbond evaporator, mechanic, continuously variable thermostat. 3. 9 cubic feet . 50 watts . 52 lbs . 20. 5” W x 29. Door frame in plastic, body with coated metal frame, interior and door panel in stainless steel .
Part No: 99M RSF-0115U
|
|
|
|
Detachable cooling unit with 5‘ supply line, fully hermetic Danfoss BD35F compressor with integrated control electronics, low-voltage protection for consumer or starter battery, electronic fuse/automatic reverse pole protection, dynamically ventilated lamellar condenser, aluminum rollbond evaporator, mechanic, continuously variable thermostat. 3. 94 cubic feet . 12/24 volts DC . 45 watts . 52 lbs . 20. 5” W x 29. 12”H x 22”D . CFC-free polyurethane insulation.
Part No: RSD-0115U
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> Mainsheet Traveler->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.1.2M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3155.1.2M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3156.1.2M
|
|
|
|
Home -> Boats & Motors -> Kayaks & Canoes -> Kayak Accessories->Heavy-Duty 1" Tiedown Straps
NRS Heavy-Duty Tiedown Straps can be used for virtually every hold-down application imaginable. Whether you're attaching your boat to your vehicle or your frame to your boat, NRS Straps won't let you down. You can never have too many straps, and these come in nine different lengths with a handy name tag for your convenience.
Part No: 1440 3
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers -> Nylon Cleats->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81021
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Transom Mounting Extension Shim
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
Part No: 99184:01
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: MODEL 41
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1257803
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1257801
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1257802
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1257703
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1257701
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1338705
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stainless Steel T-Tops & Accessories
Stainless Steel T-Tops & Accessories Standoffs, canvass, electronics box and storage bag sold separately.
Part No: 52414
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Aluminum Closed Base Cleat
Plain Aluminum. Overall length 3". Base dimensions 1-1/2" by 5/8". Max rope size 1/4".
Part No: 0545DP3ALU
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Bell Assembly Bow Stops
Thermal-plasticized rubber bow stops with bell ends protect your boat's hull from hitting metal bow stop brackets.
Part No: 29300
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 012
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 011
|
|
|
|
|
Home -> Sailboat -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 202
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->3" Blocks
Designed for small to medium-sized offshore boats, catamarans, etc. Large diameter sheaves reduce the friction caused by bending a line over a small sheave. All feature three-way head system and removable beckets. Sheave: Hardkote anodized Teflon-impregnated aluminum. Ball Bearings: Delrin ball bearings/Hi-Load wire blocks: Torlon ball bearings. Sheave Size: 3" (76mm). Line Diameter: 7/16" max. Cheek Material/Finish: Plastic/Stainless steel.
Part No: 005
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: RP-335
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: ULT-3
|
|
|
|
Home -> Engine Systems -> Engine Parts->Cable Boots
Cable Boots.
Part No: 18-4454
|
|
|
|
Home -> Ventilation -> Blowers & Heaters
Popular chiminey for stoves and heaters with 3"dia. flues. Screws in to the 3" Stove Pipe Deck Fitting (Model 226571) which permits chimney removal and sealing of the opening in heavy conditions. 11"H. Base. : 3"dia. Top: 5-1/8"sq.
Part No: 120011
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Sur-Moor™ T3C™ Mooring Collars
Hot dip galvanized steel collar protects the T3C buoy from anchor chain wear, prolonging the life of the buoy.
Part No: 33028
|
|
|
|
Home -> Ventilation -> Vents -> Interior Vents->Venturi Vents
The “state of the art” in louvered vent styling, these rugged, ABS plastic vents are easily installed on today’s highly contoured deck designs and have an adequate opening for 3" or 4" ventilation systems. Pre-drilled with four holes for #8 screws. Type: Louvered . Material: ABS plastic . Dimensions: 11/16"H x 2-3/4"W x 17-9/16"L . Cutout Size: Surface mount .
Part No: 1341-1
|
|
|
|
Home -> Ventilation -> Vents -> Interior Vents
Works with either the Seafit Louvered Vents or the Seafit Recessed Louvered 8-Slot Vent.
Part No: 331203WM
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Cabin Heaters->Cabin Heater Pipes & Accessories
Cabin Heater Pipes & Accessories.
Part No: 905051
|
|
|
