Top Sellers
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
Ratchet Orbit Block, Cheek, Counter-Clockwise, 550lb. SWL, 2.7oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. It can be set at a 0 or 90 degree orientation, provides stress-free articulation without allowing the block to over-rotate, and is locked in place with a security clip that doesn’t require tools to fit. The Dyneema link is also more compatible with carbon, Dyneema and webbing connection points than steel loop tops or shackles.
|
LetterU - White, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
Number 3 - Black, 3" from HARDLINE PRODUCTS SR
Popular vinyl letters to meet USCG requirementsSelf-adhesive, 3"H vinyl, block, letters and numbers. Meet Coast Guard requirements when applied on contrasting background with proper spacing. Black or white. Sold individually or by the kit. Four of each letter and number for a total of 144 pieces in the kit. Meet USCG requirements when affixed to a contrasting background and properly spaced. Self-adhesive vinyl.
|
|
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Black 3-Strand Nylon, 7/16'' Diameter, 5300lb. Breaking Strength from NEW ENGLAND ROPES
Dramatic resistance to damaging internal and external abrasion Combining premium nylon fiber with a high-quality marine coating and New England Rope’s superior manufacturing processes produces line that is five times more abrasion-resistant wet than any other nylon line. You can actually feel this critical performance advantage when you handle the supple line. Stretch: 16% at 15% of breaking strength. *Approximately 10–15% less strength than White Premium Three-Strand Nylon.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
|
3, 3-3, 3" ID, 3" Pole, 3" Diameter, 3" Max, 3" x 1 1, 2"H x 6-3
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,070
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,159
1,160
1,161
1,162
1,163
1,164
1,165
1,166
1,167
1,168
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,190
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Downwind Poles & Cars -> Pole End Fittings & Tub->TS Series Socket Ends
Aluminum fitting automatically locks onto the mast toggle pin.
Part No: 309028
|
|
|
|
Home -> Sailboat -> Blocks -> Sheaves, Parts & Bases->Series 55 Orbit Block™ Accessories
The precision design provides the optimum number of ball bearings in critically loaded areas, eliminates them in inactive areas and reduces ineffective mass, creating the "2-stage" bearing system for durability and low friction performance. Sheave: Carbon-fiber reinforced, PTFE-impregnated engineered nylon. Bearings: High-compression–strength Carbon Black Acetal; Stage 2 Bearing: Glass fiber-reinforced, MoS2-impregnated engineered nylon. Sheave Size: 2-5/32" (55mm).
Part No: RF-9004-08
|
|
|
|
Home -> Cabinet & Deck Hardware -> Hatches & Ports -> Exterior Vents->Dorade Boxes
Teak dorades are made with high-grade Burmese 3/4" thick teak with epoxied, biscuited joints for superior strength Bodega and Chesapeake models include baffles while the Newport model is designed to be used in conjunction with a mushroom vent that becomes the water trap Mounting hardware is included Fasteners sold separately.
Part No: 31380
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 35115-0020
|
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 34739-0010
|
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 35515-0010
|
|
|
|
|
Home -> Ventilation -> Bilge Blowers->12V Marine Blowers
This allows a very neat installation on an engine room bulkhead. Flexmount Blowers are also of radial design but are installed by attaching a mounting collar around the motor (which is supplied with the blower) to any convenient solid surface. They can be rotated inside the collar to allow the shortest ducting lengths and most convenient routings in confined spaces. Approvals: USCG, ISO 8846/9097 . Universal flexmount bracket lets outlet face any direction; corrosion-resistant construction .
Part No: 36740-0000
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->3" High-Flux Waterproof LED Recessed Lights
These waterproof fixtures produce a warm white light with the latest high-flux LED technology to assure long life. Patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Spot is equivalent to a 60W incandescent beam, bright enough for reading; flood is equivalent to a 20W incandescent beam, great for ambient light. White and chrome trim rings are included. Optional brass and spare chrome trims available. 07" (27mm) D.
Part No: 8001658
|
|
|
|
|
Home -> Electrical -> Interior Lighting -> Led Interior Lights->3" High-Flux Waterproof LED Recessed Lights
These waterproof fixtures produce a warm white light with the latest high-flux LED technology to assure long life. Patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Spot is equivalent to a 60W incandescent beam, bright enough for reading; flood is equivalent to a 20W incandescent beam, great for ambient light. White and chrome trim rings are included. Optional brass and spare chrome trims available. 07" (27mm) D.
Part No: 8001641
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-245-3000KIT
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-290-3000KIT
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Spacers
Applications: MerCruiser 61851A1 (Model 5327994): For: 18-1950, 18-1951-1, 18-1958-1, 18-1960-1 Manifolds. Barr, Indmar & Marine Power Ford Small Block V8 302-351cu. in, GM Small Block V8 305-350cu. in. GM Big Block V8 454cu. in. (Model 5328018): For: 18-1998-1, 18-1997-1, 18-1898 Manifolds.
Part No: 18-1906
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars
Forespar manufactures the widest range of whisker poles in the world. Styles and sizes are available for small dinghies, one-design racers, day sailors, offshore racers and the cruising sailor. Made in U. S. A.
Part No: 300072
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Slotted Hull Strainers with Clean-Out Door
Groco strainers have a unique access door which makes it easy to clear debris and marine growth that can hamper performance and even cause premature failure in water pumps and exhaust systems. Eliminating the need to haul boats out of the water, these strainers can save enormous amounts of time and money in the event of an accident or emergency which requires immediate servicing of the strainer itself.
Part No: ASC-3000
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: ULT-435
|
|
|
|
Home -> Plumbing -> Fittings & Valves->ARG Series Raw Water Strainers
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Part No: ARG-3000-S
|
|
|
|
Home -> Electronics -> Boat Instruments->Self Leveling Radar Mounts
Self leveling radar mounts guarantee your radar will stay level with the horizon as the boat heels or rolls.
Part No: RM-3TUBE-10
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super Roller Polyurethane Trailer Rollers & Bow Guards
Resilient, shock-absorbent, non-marking Super Rollers are made from high-quality polyurethane to protect your investment. They spin freely to reduce drag while launching or retrieving your boat and remain uneffected by oil, gas or salt. Should last the lifetime of your trailer. Made in the U. S. A.
Part No: RP-325
|
|
|
|
|
Home -> Engine Systems -> Engine Parts->Manifold Spacers
Applications: MerCruiser 61851A1 (Model 5327994): For: 18-1950, 18-1951-1, 18-1958-1, 18-1960-1 Manifolds. Barr, Indmar & Marine Power Ford Small Block V8 302-351cu. in, GM Small Block V8 305-350cu. in. GM Big Block V8 454cu. in. (Model 5328018): For: 18-1998-1, 18-1997-1, 18-1898 Manifolds.
Part No: 18-1908
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20703S
|
|
|
|
This polished bronze fitting features a finned design that insulates the deck from hot stove and heater exhaust. 3" stove pipe screws into tapered bottom of adapter. Includes finishing ring, cover with O-ring seal and key. 2-7/8"H. Flange OD: 7".
Part No: 120242
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Cabin Heaters->Cabin Heater Pipes & Accessories
Cabin Heater Pipes & Accessories.
Part No: 905079
|
|
|
|
Home -> Ventilation -> Vents -> Interior Vents
Designed with a slotted-throat flange for easy hose installation. . Flexible black polypropylene flange and chrome-plated die-cast zinc cowl takes 3" duct hose. 5 5/16"W x 2 1/4"H x 6"L. . Neck extends 1" below deck. . Cutout dia. : 3 1/4". . Three predrilled countersunk mounting holes for #8 screws (not included).
Part No: 1405-3
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super-Roller Polyurethane Bow Guards
- Outside Dia - - Hole Dia - - Fits Bracket - - Vendor Part # - V-Bow Stop V-Bow Stop Mini Bow Stop Bow Stop Bow Stop Bow Roller Bow Roller --- --- 4-1/4" 5-1/4" 5-1/4" 3" 3-1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 3" 4" 3" 3" 4" 3" 4" RP-3 RP-404 ULT-435 ULT-3 ULT-4 RP-335 RP-444.
Part No: RP-3
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Vinylvent Ventilator Hoses
PVC hose supported by anodized wire helix. Resistant to ozone, sunlight and weathering. Self-extinguishing material will not support a flame. One-year warranty. Sold by the foot. Material: PVC hose Cutout Size: Surface mount.
Part No: 116-400-3000W
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-07
|
|
|
|
|
Home -> Ventilation -> Vents->Day/Night Plus Solar Vents
Solar cells power the fans for efficient, active ventilation. Proper ventilation is the key component to preventing the growth of mold, mildew and fungi and the damage they can cause to interior fabrics, electronics and metal components. Most every boat with a cabin will benefit from the installation of one or more Solar Vents. Direct-to-deck mounting affords greater security and protection against theft. Each includes an insect screen, below-decks shut off damper and internal on/off switch.
Part No: N20703W
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Super-Roller Polyurethane Rollers
Resilient, shock-absorbent, non-marking Super Rollers are made from high-quality polyurethane to protect your investment. They spin freely to reduce drag while launching or retrieving your boat and remain uneffected by oil, gas or salt. Should last the lifetime of your trailer. Made in the U. S. A. Types Keel Rollers (Spool and Tapered). Self-Centering Roller. Wobble, Smooth. Side Guide.
Part No: RP-53A
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Stainless Hasp
3in X 1-1/8in Locking Hasp, SS|HASP-LOCKING 3X1 1/8IN SS.
Part No: H90-1025-1W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->Stainless Hasp
3in X 1-1/8in Locking Hasp, SS|HASP-LOCKING 3X1 1/8IN SS.
Part No: MH30-1015-1W
|
|
|
