Welcome! Please Sign-In
Top Sellers
3/8" G40 Chain, 5400lb. SWL, 16,200lb. Breaking Strength, 1.49lb./ft., 400' Standard Pack from WEST MARINE
10" Standard Height Cowl Vent, 4-3/4" dia. Cutout Size from NICRO VENTILATION
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Replacement Delrin Roller, 3" Dia., 3-3/8" Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Anchor Safety Strap from LEWMAR
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
8mm (5/16") Stock Dia. Bolt, 4-5/16"L, 5/8" Hole Dia., 3" Stock Length, 1" Plate Dia. from SEADOG
Deck Plate, 3-3/8"dia. x 1-15/16"H, 2,250lb. SWL from SCHAEFER
8' dia. Bird Spider from BIRD B GONE
8' dia. Bird Spider from BIRD B GONE
Stainless steel “arms” of the Bird Spider move with the breeze, deterring birds from landing and causing damage to your boat, rooftop, lights, signs and more. It’s easy to install and maintain and will not harm people or birds.
Oval Deck Pipe from SEAFIT
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
Mainsail Feeder from SPINLOCK
Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.
Brass-Bristle Brush from SEAFIT
Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.
Snap Furl CF-700 Furling System from SCHAEFER
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
Teak Plugs - 3/8" from SEAFIT
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
3/8" NPT Aluminum hose barb from MOELLER
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.

3, 8'' X 3, 8" Dia, 8" Chain, from SEAFIT, 8" Bow, 8'' X 1 1

3/8'' SS Jaw/Jaw Swivel from SUNCOR Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Stainless Steel Jaw and Jaw Swivels
Drop forged 316 stainless steel, with screw pin on both sides.
Part No: C0156-HD10
3/8'' SS Screw Pin Anchor Shkle from WEST MARINE Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->SS Screw Pin Anchor Shackles
To prevent accidental opening, always seize (safety wire) the shackle pin.
Part No: 6596S
3/8'' Teflon Flax Packing, 2FT. from WESTERN PACIFIC TRAD Home -> Engine Systems -> Engine Parts->PTFE Flax or TefPack Packing
Less friction means less heat and lower wear with a tighter fit. Each roving is dipped in P. T. F. E. and then woven into a tight square braid. The lubricating P. T. F. E. lasts the life of the packing.
Part No: 10019
3/8'' X 1 1/2'' Clevis Pins [1 Qty] from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5562MP
3/8'' X 1'' Clevis Pins [1 Qty] from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5561MP
3/8'' X 2'' Clevis Pins [1 Qty] from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5251MP
3/8'' X 3/4'' Clevis Pin [1 Qty] from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Clevis Pins
Stainless Steel Clevis Pins.
Part No: 5560MP
3/8''X2 1/2'' Galvanized O Ring from SEADOG Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Hot Dipped Galvanized "O" Rings
Hot Dipped Galvanized Steel Multiple application.
Part No: 192625
3/8''X3'' Galvanized O Ring from SEADOG Home -> Anchor & Docking -> Chain & Mooring->Hot Dipped Galvanized "O" Rings
Hot Dipped Galvanized Steel Multiple application.
Part No: 192630
3/8" Aluminum Filter Kit 18-7945/18-7775 from SIERRA Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->10 Micron Filter Kits with Drain Bowls
Sierra AquaVue and metal bowl separator filters allow water to be drained from the filter to extend service life. Use the AquaVue bowl for outboard, above deck installations.
Part No: 18-7986-1
3/8" BBB Chain, 2650lb. SWL, 11000lb. Breaking Strength, 1.7lb./ft., 400' Standard Pack from ACCO CHAIN Home -> Anchor & Docking -> Chain & Mooring->BBB Anchor Chain
Bulk Chain We stock a complete selection of I. standard chain from Acco to fit almost any windlass. chain vendors. When comparing Acco chain to other brands, be sure to ask if other models are “hot-dip. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. BBB is made of low-carbon steel, but has shorter, calibrated links that are designed to be compatible with many windlasses.
Part No: 4101-40602
3/8" Black LineSaver Mooring Snubber from WEST MARINE Home -> Cordage -> Anchor Line & Dock Line -> Chafe Gear and Snubbers->LineSaver Mooring Snubbers
Recently redesigned and tested to 1. 2 million cycles, these super-elastic, natural rubber snubbers absorb shock loads and extend the life of dock lines while minimizing stress to structural areas around cleats caused by the jolting action of wind, waves and wakes.
Part No: 307WM
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR Home -> Sailboat -> Shackles, Snaps & Fittings->Bow/Stern Eyes
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
Part No: C0353-10115
3/8" Bow/Stern Line - 1.03" ID Between Studs x 3.63" Thread Length from SUNCOR Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyebolts & U Bolts->Bow/Stern Eyes
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
Part No: C0353-10090
3/8" Chain Hook from SEAFIT Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Chain Hooks
Used to grab a link of chain, so the load can be taken up on a length of nylon line. This takes the load off the windlass and provides some shock absorption as the boat moves in waves.
Part No: 440242443
3/8" Chain, 3750lb. SWL, 15000lb. Breaking Strength,1.4lb./ft. Weight, 200' Length from SUNCOR Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Stainless-Steel–Proof Coil Chain
.
Part No: S0602-0010
3/8" Classic Filament Three-Strand Polyester, 4400lb. Breaking Strength from SAMSON ROPE Home -> Cordage -> Running Rigging By The Foot->Classic Filament Three-Strand Polyester Line
Continuous filament three-strand polyester line has excellent abrasion resistance and splices easily. Very good flexibility with a knobby feel for a sure grip. Stretch: 4. 2% at 15% of breaking strength . Optimum Use: Running rigging on dinghies and traditional vessels . Benefits: Combines a traditional look with low-stretch performance . Lowest stretch of any three-strand line .
Part No: 7200-12-00600
3/8" Classic Spun Three-Strand Polyester, 2500lb. Breaking Strength from NEW ENGLAND ROPES Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Classic Spun Three-Strand Polyester Line
.
Part No: 7230-12-00600
3/8" Clevis Pin dia., 7/8" inside dia., 4-pack from WEST MARINE Home -> Sailboat -> Shackles, Snaps & Fittings->Stainless-Steel Cotter Rings
Stainless-Steel Cotter Rings.
Part No: 5544MP
3/8" Clevis Pin, Use with Furling Unit 00AL from HARKEN Home -> Sailboat -> Headsail Furling -> Furling Accessories->Clevis Pin Sets
Clevis Pin Sets.
Part No: 1108
3/8" Color-Coded Sta-Set X, 5500lb. Breaking Strength, Blue from NEW ENGLAND ROPES Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Color Coded Sta-Set X Polyester Yacht Braid
White Sta-Set X with red, blue, or green flecks for easy identification. Same properties as white Sta-Set X. Best Use: Color-coded cruising halyards, spinnaker sheets, and guys . Construction: Parallel-core braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Uni-directional polyester . Stretch: 1. 6% at 15% of breaking strength . Not Recomended: Applications requiring maximum flexibility .
Part No: 3113-12-00600
3/8" Color-Coded Sta-Set X, 5500lb. Breaking Strength, Green from NEW ENGLAND ROPES Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Color Coded Sta-Set X Polyester Yacht Braid
White Sta-Set X with red, blue, or green flecks for easy identification. Same properties as white Sta-Set X. Best Use: Color-coded cruising halyards, spinnaker sheets, and guys . Construction: Parallel-core braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Uni-directional polyester . Stretch: 1. 6% at 15% of breaking strength . Not Recomended: Applications requiring maximum flexibility .
Part No: 3112-12-00600
3/8" Color-Coded Sta-Set X, 5500lb. Breaking Strength, Red from NEW ENGLAND ROPES Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Color Coded Sta-Set X Polyester Yacht Braid
White Sta-Set X with red, blue, or green flecks for easy identification. Same properties as white Sta-Set X. Best Use: Color-coded cruising halyards, spinnaker sheets, and guys . Construction: Parallel-core braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Uni-directional polyester . Stretch: 1. 6% at 15% of breaking strength . Not Recomended: Applications requiring maximum flexibility .
Part No: 3111-12-00600
3/8" Color-Coded Sta-Set, 5100lb. Breaking Strength, Blue from NEW ENGLAND ROPES Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Color-Coded Sta-Set Polyester Yacht Braid
Sta-Set with red, blue or green flecks to make identifying each line quick and easy Strong and durable polyester double braid with a braided core and continuous filament braided cover. Cost-effective, long lasting and lots of color choices for simplified sailing. A great balance of stretch, strength, suppleness, abrasion resistance and cost. Best Use: All cruising boat applications, racing boat control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester .
Part No: 2113-12-02400
3/8" Color-Coded Sta-Set, 5100lb. Breaking Strength, Green from NEW ENGLAND ROPES Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Color-Coded Sta-Set Polyester Yacht Braid
Sta-Set with red, blue or green flecks to make identifying each line quick and easy Strong and durable polyester double braid with a braided core and continuous filament braided cover. Cost-effective, long lasting and lots of color choices for simplified sailing. A great balance of stretch, strength, suppleness, abrasion resistance and cost. Best Use: All cruising boat applications, racing boat control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester .
Part No: 2112-12-00600
3/8" Color-Coded Sta-Set, 5100lb. Breaking Strength, Red from NEW ENGLAND ROPES Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Color-Coded Sta-Set Polyester Yacht Braid
Sta-Set with red, blue or green flecks to make identifying each line quick and easy Strong and durable polyester double braid with a braided core and continuous filament braided cover. Cost-effective, long lasting and lots of color choices for simplified sailing. A great balance of stretch, strength, suppleness, abrasion resistance and cost. Best Use: All cruising boat applications, racing boat control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester .
Part No: 2111-12-02400
3/8" Dead End Bail from SCHAEFER Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Dead End Bails
Stainless bails attach anywhere a dead end is needed for extra purchase. Each ShWt 0.
Part No: 78-93
3/8" Dia. Shock Cord, 150' Std. Pk. from SEAFIT Home -> Sailboat -> Rigging Products->Shock Cord
Nylon-covered cord is useful everywhere on the boat. White with blue flecks.
Part No: 126862
3/8" Dia. White Sta-Set Braid, 4,400lb. Breaking Strength from NEW ENGLAND ROPES Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->White Sta-Set Polyester Yacht Braid
A perfect balance of stretch, strength, suppleness, abrasion resistance and cost Strong and durable polyester double braid with a braided core and continuous filament braided cover. Cost-effective, long lasting and lots of color choices for simplified sailing. The mainstay of New England Ropes’ product line. Best Use: All cruising boat applications, racing boat control lines . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Braided polyester Stretch: 2.
Part No: 2100-12-02400
3/8" Dia., 16 Thread, Bag of 100 from FASCO FASTENERS Home -> Fasteners -> Mechanical Fasteners->Silicon Bronze Hex Nuts
Silicon bronze hex nuts in various bagged quantities, threads and diameters.
Part No: 2418
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12