Top Sellers
3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.
|
Spring Loaded Ring Pull, Square 2 x 2 3/8" from WEST MARINE
Spring-loaded ring immediately returns to flush when released. Type 304 stainless steel . Size: 2 x 2 3/8" .
|
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Glasskoter Resin Roller Cover - 9" x 3/8" Nap from CORONA
For epoxy and polyester resinPhenolic core. Woven mohair. 3/8" nap for semi-smooth or 1/8" nap for fine finishes.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
|
|
304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
|
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
|
3, 8" Pipe, 8" NPT from SEAFIT, 8" Hose ID from SEAFIT
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,169
1,170
1,171
1,172
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,200
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Street Ells
Bronze 90º Street Ells.
Part No: 139813
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze 90º Elbows
Assorted 90 Degree Bronze Elbows.
Part No: 139803
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Tees
Bronze Tees.
Part No: 139833
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Bronze Square Head Plugs, NPT
Bronze Square Head Plugs, NPT.
Part No: 139883
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring->Nylon Thimbles
Nylon Thimbles.
Part No: 16949
|
|
|
|
Home -> Anchor & Docking -> Chain & Mooring -> Anchor Chain->Proof Coil Anchor Chain
Bulk Chain We stock a complete selection of I. S. O. All Acco chain is hot-dip galvanized, which is superior to the zinc electroplating used by most other major U. chain vendors. ” Remember that the Safe Working Load (SWL) is a conservative rating for safety and should not be exceeded, although the breaking strength is generally 3–4 times greater. Proof Coil (PC) is made of low-carbon steel and designed for ordinary marine applications, but not for use in most windlasses due to its long links.
Part No: 4001-40602
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 139773
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 139771
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 139904
|
|
|
|
Home -> Plumbing -> Fittings & Valves -> Metal Plumbing Fittings
.
Part No: 139715
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 139772
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 139907
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Nylon Male Pipe-to-Hose Adapters
.
Part No: 139901
|
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Brass Threaded Nipples, NPT
We cannot source bronze nipples, and so we offer brass instead. Due to the difference in nobility between brass and bronze, we recommend that you not use them together in saltwater environments.
Part No: 139770
|
|
|
|
Home -> Cordage -> Rigging Products->Powerlite PBO Rigging
Affordable performance and comfort improvement for racers or cruisersTake advantage of one of the most significant performance upgrades available for sailboat owners—cost effective PBO standing rigging that’s lighter, stronger, and fully compatible. POWERLITE PBO Rigging provides race proven technology, superior quality and a price comparable to rod. Powerlite PBO is now offered as standard equipment on the Melges 32 and can be found on the C&C 115, Grand Soleil 37, and Dolphin Catamarans.
Part No: PBO038B
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Premium Prespliced Three-Strand Anchor Lines
High-quality anchor line handles dynamic shock loadsReplace your aging or worn-out anchor rode with stronger, more durable West Marine Premium Three-Strand Nylon line. This high-quality anchor line is designed to handle the dynamic shock loads caused by boat motion and is treated for maximum abrasion-resistance. It’s made with high-quality premium nylon using a uniform construction process and a marine coating that creates an extremely abrasion-resistant, snag-resistant and long-lasting line.
Part No: 8560-12-00100
|
|
|
|
|
Home -> Anchor & Docking -> Anchor Line & Dock Line->Premium Prespliced Three-Strand Anchor Lines
High-quality anchor line handles dynamic shock loadsReplace your aging or worn-out anchor rode with stronger, more durable West Marine Premium Three-Strand Nylon line. This high-quality anchor line is designed to handle the dynamic shock loads caused by boat motion and is treated for maximum abrasion-resistance. It’s made with high-quality premium nylon using a uniform construction process and a marine coating that creates an extremely abrasion-resistant, snag-resistant and long-lasting line.
Part No: 8560-12-00150
|
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line->Premium Prespliced Three-Strand Anchor Lines
High-quality anchor line handles dynamic shock loadsReplace your aging or worn-out anchor rode with stronger, more durable West Marine Premium Three-Strand Nylon line. This high-quality anchor line is designed to handle the dynamic shock loads caused by boat motion and is treated for maximum abrasion-resistance. It’s made with high-quality premium nylon using a uniform construction process and a marine coating that creates an extremely abrasion-resistant, snag-resistant and long-lasting line.
Part No: 8560-12-00200
|
|
|
|
Home -> Cordage -> Rigging Products->Prespliced High-Performance Halyards
Pre-spliced high-tech halyards to fit your boatOur tapered, high-performance halyards combine high-strength, low-stretch cores with the abrasion resistance and lasting durability of a polyester cover. Their low-stretch properties offer better control over draft location and luff tension for improved sailing performance. Features a High-Tech Eye Splice on one end and a Flemish Eye on the other. No shackle included.
Part No: ZHTH12-100
|
|
|
|
Home -> Cordage -> Rigging Products->Prespliced Polyester Double Braid Halyards
Ready-made halyards for people who would rather sail than spliceChange out your old worn out halyards with these high-quality, professionally spliced, strong and durable polyester double-braid halyards. Cost-effective and long-lasting, they are an ideal choice for cruising and recreational sailing. Features a Double Braid Eye Splice on one end and a Flemish Eye on the other.
Part No: ZH12-90
|
|
|
|
Home -> Cordage -> Rigging Products->Prespliced Sta-Set X Main Halyards
White Sta-Set X low-stretch polyester line with a Wichard forged stainless-steel keypin shackle at one end and a Flemish eye on the other. Sta-Set X stretches 33% less than conventional line which results in better control over draft location and luff tension. Rope Type: Sta-Set X Parallel core braid .
Part No: MXH12-90
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Regatta Polyester Single Braid
A very supple, soft line that has good abrasion resistance. Knobby surface is easy to grip, even when wet. Medium-stretch, hocklefree, and free-running. Because it is “easy on the hands” and “takes a good grip on the winch,” this is the soft-spun line that Practical Sailor prefers. Best Use: Cruising/club racer handheld lines-sheets, control lines, furling lines. Construction: 12-strand single braid . Core Fiber/Construction: Spun polyester . Stretch: 3.
Part No: 1250-12-00600
|
|
|
|
Home -> Sailboat -> Rigging Products->Removable Turbuckle Covers
Prolong the life of your turnbuckles with these white polyester textile covers. Velcro allows easy installation without removing turnbuckles. Come complete with polyester line to lace securely in place. Easy to clean, won't discolor in the sun Sizes to fit all turnbuckles Sold individually Made in U. S. A.
Part No: RTC1.17
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->AmSteel Dyneema Single Braid
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
Part No: 870024206030
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->AmSteel Dyneema Single Braid
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
Part No: 870024706030
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->AmSteel Dyneema Single Braid
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
Part No: 870024406030
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Sta-Set X Polyester Double Braid
Patented all-polyester braid with parallel core construction and a filament/spun cover for improved handling and greater abrasion resistance. One third less stretch than Sta-Set at only a small price premium. In many applications, Sta-Set X can be used in lieu of expensive racing braids, especially when sized conservatively. Identified by two fine red tracers in the cover forming the characteristic “X”. Best Use: Cruising boat halyards, spinnaker sheets, guys . Stretch: 1.
Part No: 3100-12-3000
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Solid Color Sta-Set Polyester Yacht Braid
In red, blue, green or black with a bold white fleck and fine red tracer or red with a bold white fleck and a fine white tracer. Same properties as white Sta-Set. Best Use: All cruising applications, racing control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Polyester braid . Stretch: 2.
Part No: 2104-12-00600
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Solid Color Sta-Set Polyester Yacht Braid
In red, blue, green or black with a bold white fleck and fine red tracer or red with a bold white fleck and a fine white tracer. Same properties as white Sta-Set. Best Use: All cruising applications, racing control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Polyester braid . Stretch: 2.
Part No: 2103-12-00600
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Solid Color Sta-Set Polyester Yacht Braid
In red, blue, green or black with a bold white fleck and fine red tracer or red with a bold white fleck and a fine white tracer. Same properties as white Sta-Set. Best Use: All cruising applications, racing control lines . Construction: Double braid . Cover Fiber/Construction: Smooth braided polyester . Core Fiber/Construction: Polyester braid . Stretch: 2.
Part No: 2102-12-00600
|
|
|
