Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Braided Polyester Cord, by the Foot from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Sold by the foot. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
50' Braided Polyester Cord from NEW ENGLAND ROPES
A low-stretch cord that’s great for flag halyards, foredeck netting, or light-air spinnaker sheets. Length: 50'. Diameter: 1/8". Best use: Utility cord, flag halyards . Construction: Braided polyester . Breaking strength: 530lb. . Stretch: 3% at 15% of breaking strength .
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
|
Step Pad, 10-3/4" x 5-1/4", Blue from LEWMAR
Maintain your footing under all conditions! Self-adhesive, diamond-patterned, nonskid pads are great for decks, steps, dinghy floors, personal watercraft, etc. They resist wear and tear, peeling, saltwater, fuels and chemicals. Pads have rounded edges and are precut to fit most common step sizes. Trim with scissors for a custom fit. Peel-and-stick installation. Sold in pairs.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Brass Reducer, 1/4"NPT x 1/8" FNPT from MOELLER
Barb-Fuel 1/4Fnp x 1/8Mnpt Brs|Barb-Fuel 1/4Fnp x 1/8Mnpt Brs.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
|
1, 1-3, 3-1, 3, 4" to 1-1, 8" to 3-1, SAE Size 2 from NORMA, 1" to 1-5, 4" to 3-1
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,080
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,173
1,174
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3164
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3177
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3176
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution->Dual Sense 125A Voltage Sensitive Relay
When the voltage drops below 12. 8 volts (engine is stopped), the VSR disengages, separating the batteries. This system eliminates the possibility of draining the start battery and protects sensitive electronics powered by the house battery from harmful engine start up spikes. Dual sensing allows the relay to sense the voltage of both batteries, activating if either is receiving a charge. Designed for systems where a battery charger or second charging source is connected to the house battery.
Part No: 710-300A-12V
|
|
|
|
Home -> Electrical -> Batteries & Accessories
Isolates your battery banks to prevent accidental discharge of starting bank These Dual Circuit Plus switches isolate your Start and House battery circuits, preventing accidental discharge of the Starting bank and protecting your electronics from engine starting sags and spikes. The Combine Batteries position allows you to cross-connect your battery banks in the event of a weak Start battery. Ignition-protected, safe for use aboard gas-powered boats, and meets all ABYC battery switch standards.
|
|
|
|
Home -> Electronics -> Global Positioning Systems->Marine Network Cables, Connectors, & Accessories
The Garmin Marine Network is a proprietary ethernet-based network that seamlessly connects several plug-and-play marine components, delivering position data, charting, weather, sonar, radar and other important data to boaters' fingertips. The entire system is waterproof and completely plug-and-play.
Part No: 010-10647-00
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056530
|
|
|
|
Home -> Anchor & Docking -> Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP300
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 Aerospace Protectant
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
Part No: 230330
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 Aerospace Protectant
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
Part No: 30370
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 Aerospace Protectant
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
Part No: 030340
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 Aerospace Protectant
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
Part No: 30350
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes -> All Purpose Cleaners
Environmentally-friendly formula safely cleans marine canvassThe only cleaners recommended by and for Sunbrella®. Dilute for spot cleaning. Safely removes even the most difficult stains and rinses residue free. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Quart. Non-toxic, non-hazardous formula meets or exceeds EPA standards for biodegradability. Use to pre-clean marine canvas prior to re-treating. The only cleaner recommended by and for Sunbrella.
Part No: 30552
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30670
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30616
|
|
|
|
|
Home -> Paint & Maintenance -> Cleaners, Soaps & Polishes->303 High Tech Fabric Guard
Excellent protectant for Sunbrella upholstery and breathable foul weather gear The only repellency product recommended by and for Sunbrella. Restores lasting water repellency to marine canvas. Stops leaks and protects against soiling and water and oil-based stains. Resists mildew formation and UV sun damage. Spray on, let dry. One pint treats 75–100 square feet of marine canvas. Also a great choice for fabric upholstery, carpeting and breathable foul-weather gear.
Part No: 30650
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704037
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps -> Hose Accessories->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704041
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704050
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704032
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704017
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704300
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704080
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704070
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704060
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704100
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704090
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704026
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->304 Stainless-Steel Hose Clamps
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .
Part No: 1266704013
|
|
|
