Top Sellers
1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
Gusher 10 Pump from WHALE PUMPS
Die-cast, epoxy-coated, anodized alloy, synthetic neoprene rubber diaphragm and stainless steel. Removable stainless handle with lanyard. To complete the installation, select either the Aluminum or Plastic Thru-Deck Kit, which seal the installation against water intrusion and and give it a finished look. Nitrile Diaphragm Kit, AK3714, available through special order. Material: Anodized aluminum . Dimensions: 8"H x 4-1/8"W x 5-3/4"L . Port Sizes: 1-1/2" .
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
Flush Lock and Latch from PERKO
Black plastic, with stainless steel "D" ring handle, stem and lock nut. Two O-rings for increased water resistance. Position indicator shows open or closed position. Lock with 2 keys. Door thickness: 3/8" to 1-1/4" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 1-1/16" to 2-9/16" .
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
|
Boater's Pocket Reference from ROBERT HALE
Thomas McEwen. A pocket-sized alternative to Chapman, jam-packed with information boaters need to know! Includes a wealth of how-to info, plus reference facts, figures, formulas, graphs and tables about boating. Paperback . 3 1/4"W x 5 3/8"H x 15/16"D. . 766pp.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
4-Cup 12V Coffee Maker from WARING
Enjoy fresh coffee ashore or afloat with this 4-cup coffee maker that plugs into any 12V outlet. Features include a durable stainless-steel carafe, dripless pour spout, knuckle guard, 30-minute auto shut off, “On” indicator light, and a convenient “Brew Pause” feature that lets you pour a cup of coffee before brewing has finished. Includes coffee scoop and three filters. 10 1/4"H x 5 1/4"W x 7 5/8"D.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
|
|
|
|
|
from LEWMAR, 9oz, 0oz, 0, SWL, 1, SWL, from LEWMAR, 3-5, 2", 30mm Synchro Control Block
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,175
1,176
1,177
1,178
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901325
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901322
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901365
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901314
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901324
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901321
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901341
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901320
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901361
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901330
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901326
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901328
|
|
|
|
|
Home -> Sailboat -> Blocks->30mm Synchro Control Blocks
Quality Lewmar blocks in compact 30mm size Lightweight 30mm blocks feature the same advanced materials and open design of Lewmar's 40mm blocks for high performance and reduced weight. The MRT (Metal Replacement Technology) sheaves, combined with the stainless steel central race and balls, deliver the ultimate efficiency and weight advantage. Sheave: MRT Composite reinforced plastic Ball Bearings: Stainless-steel central race and balls Sheave Size: 1-1/16" (30mm) Line Dia.
Part No: 29901323
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Winch Spare Pawl Gear Kits
Includes: Pawl gear (1). Spindle sleeve (2). Pawl (2).
Part No: 48000465
|
|
|
|
Home -> Fishing -> Reels->International VSX Series Reels
This premium reel was designed for braided linesFeaturing an improved design over V-series reels, and built specifically to handle braided lines. Powerful double-disc drag with 150-degree drag quadrant is engineered specifically to muscle through extreme drag settings while maintaining an appropriate and smooth drag curve throughout the entire range of the drag lever. Stainless steel main and pinion gears . Drag cam to achieve extreme drag ranges.
Part No: 30VSX
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Flexible Water Tanks
Flexible, light and form-fitting, these tanks use a PVC bladder inside a tough, abrasion-resistant nylon outer “envelope. ” Maintenance is easy because the inner bladder can be removed for cleaning and inspection. The bladder is slightly oversized so pressure is exerted on its nylon shell, rather than on the heat-welded seams. 1 1/2" 90° fill and 1/2" straight outlet fittings ready to install. Port Sizes: 1-1/2" 90° fill, 1/2" straight outlet . Vent: No .
Part No: 26957
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-023
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-041
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Long Integral Toggles/Links
Replaces Schaefer standard, integral toggle link to raise bottom drum assembly off deck to clear anchor windlasses, bow rollers or anchors.
Part No: 3100-24
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Long Integral Toggles/Links
Replaces Schaefer standard, integral toggle link to raise bottom drum assembly off deck to clear anchor windlasses, bow rollers or anchors.
Part No: 3100-22
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Inverters->ME Series Modified Sine Wave Inverter/Chargers
Easy-to-install AC power for your boat A safe, reliable inverter/charger for your boat, made to the stringent requirements of UL/cUL 458. Ruggedly marinized with conformal-coated circuit boards, powder-coated chassis and stainless fasteners; the ME Series can be mounted on a shelf or vertical bulkhead. Magnum’s unique die-cast aluminum base allows full ratings up to 45°C for superior high temperature operation. Output Waveform: Modified sine wave. DC Input Type: 5/16" ring terminals.
Part No: ME3112-U
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31415
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31424A
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31425B
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31423A
|
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->316 Lock Washers - Bulk Packs
Pack quantities range from 25 to 100 count.
Part No: 31426B
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cabinet Hardware & Locks->316 Stainless Steel Barrel Bolt
Requires seven - 5/32" fasteners (not included) 1-1/2"W MFRs lifetime limited warranty .
Part No: C3855-0001
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
Part No: SS12038ABA
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
Part No: SS12064ABA
|
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Heavy-Duty 316 Stainless-Steel Hose Clamps
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .
Part No: SS12050ABA
|
|
|
