Top Sellers
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
|
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
|
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
|
|
|
Repl. Cylinder - Repl. Hynautic Model K2 from TELEFLEX
Hydraulic Cylinders -- the same quality steering components that comprise the many Hynautic systems may also be ordered independently for both new or retrofit applications.
|
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
|
|
|
Speedometer Kit 80mph, 20-80mph, Includes pitot, 20' tubing, Dia, 3.78", Mounting Hole Max/Min, 3.41"/3.44", D 2.7" from TELEFLEX
White dial, black numerals, black pointer with fire-orange tip. Scratch-resistant curved glass lenses with polished stainless steel, near flush bezels. U. S. and metric scales with ISO symbols .
|
SeaStar Helm Seal Kit from TELEFLEX
Replacement shaft seal kit HS5176 fits various post-1990 SeaStar 1. 4, 1. 7 (I), 2. 0, 2. 4 (II), SeaStar Pro and SeaStar helms.
|
BayStar Helm Seal Kits from TELEFLEX
Replacement front seal kits for both front and rear mount helms. HS5147 fits BayStar front mount and SportTilt helms . Contains 3 screws, shaft seal and o-ring seal.
|
Tach Diesel Mag. P.U. 4000 rpm from TELEFLEX
A popular choice for gas and diesel inboard engines, White Premier instruments feature white dials with modern black and blue graphics and superior light pipe illumination. When illuminated, black dial grads and pointer become red. Fog-resistant design for enhanced readability.
|
|
|
SeaStar Filler Kit from TELEFLEX
SeaStar hydraulic steering systems require the use of a special high-quality hydraulic fluid meeting MIL SPEC H-5606 C.
|
Fuel Sending Unit Only - 4-24'' Tank from TELEFLEX
Complete kit includes a reliable dash-mount gauge with a black face and white numerals. The triple patented sending unit has an adjustable float arm and U-channel that fits virtually all tanks from 4"-24" deep. Compatible with 12V DC systems with common or insulated ground.
|
|
8' from TELEFLEX, 30' from TELEFLEX, 26' from TELEFLEX, 32' from TELEFLEX
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
100
200
300
400
500
600
700
800
900
1,090
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,179
1,180
1,181
1,182
1,183
1,184
1,185
1,186
1,187
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,210
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: CC33223
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: CC33224
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-312.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-336.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-360.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-384.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-408.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-432.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-456.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-480.0
|
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering
.
Part No: 032377-03-072.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-084.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-096.0
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->33C Red Jacket™ Control Cables
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
Part No: 032377-03-108.0
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Fixed Shank Scoop Anchors->Rocna Anchors
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .
Part No: ROCNA 15
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: RAY15
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manta™ Anchors
One-piece anchors for maximum strength and holding power Constructed of high-grade steel cast in a single piece for superior strength, this anchor delivers exceptional holding power in most seabeds and remains stable under varying tide and wind conditions. Sets and resets quickly and roll stabilization prevents breakout caused by veering. Stows easily on a bow roller. Hot dipped galvanized steel. Cons: Not as high holding power compared to other large-boat anchors. Style: Bruce-style claw .
Part No: 301050113
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY15
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->International Baitcasters
A super-smooth, fast-action reel for inshore game fishing Every reel in this series features a lightweight, one piece, forged machined aluminum frame. Inside each is a machined, stainless-steel main gear and pinion gear. These reels also offer infinite anti-reverse, sealed stainless-steel bearings and Penn’s advanced HT100 star drag system. The 975 offers extra capacity and extra power. Super smooth and fast action is ideal for a wide range of inshore game fish.
Part No: 0009-0790
|
|
|
|
Home -> Sailboat -> Winches -> Self-Tailing Winches->ELS & E-Series Electric Self-Tailing Winches & Conversion Kits
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.
Part No: 480343002
|
|
|
|
Home -> Sailboat -> Winches -> Winch Repair Parts->Winch Spare Pawl Gear Kits
Includes: Pawl gear (1). Spindle sleeve (2). Pawl (2).
Part No: 48000466
|
|
|
|
Home -> Sailboat -> Winches->Spare Winch Drum Bearing Kits
This kit contains: 1 Drum bearing.
Part No: 48000456
|
|
|
|
Home -> Fishing -> Fishing Accessories->Digital Fish Scale and Case
NEW! Berkley® TEC™ Digital Scales include two models to cover all types of fishing applications. One measures to 35 pounds, and the second is a hefty 100 pound model. Both models feature fishings first big-screen two sided display which allows visibility to both the angler and co-angler at the same time. As with all TEC™ tools, these digital scales feature a Softorx™ finish for comfort while handling, and provides a secure non-slip grip. Soft-side weatherproof case for protection and storage.
Part No: 1131061
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6741
|
|
|
|
|
Home -> Sailboat -> Blocks->Snatch Blocks
Features include 15-5 PH stainless shackle and attachment bolt for strength, soft PVC cheeks that prevent damage to decks and eliminate clatter, cast 300 series stainless steel hasp and hardware, stainless roller bearings for smooth operation. The RF6741 blocks have removable aluminum sheaves, midrange (RF6710, 6711, 6720, and 6721) feature Acetal sheaves, and big boat 6751 sheaves are removable stainless steel. Black. Cheek Material/Finish: Soft PVC. Bearings: Stainless needle bearings.
Part No: RF6730
|
|
|
|
Home -> Electrical -> Meters & Distribution -> High Amp Distribution->Class T (JJN/JLLN/A3T) Fuses
Recommended by inverter manufacturers because their fast response time can protect delicate inverter circuitry. Silver-plated blades. 200A mount on 5/16" studs, 225–400 mount on 3/8" studs. 225–400A fuses use 5002 fuse block. 20000A interrupt capacity. Max 160V DC.
Part No: 5120
|
|
|
|
Home -> Sailboat -> Downwind Poles & Cars->Hoyt Jib Boom™ Systems
Proven on over 1,000 sailboats and numerous trans-oceanic passages As your boat bears off downwind, and the sheets are eased, the Hoyt Jib Boom maintains precise control of the jib’s leach. This results in remarkable performance improvement and ease of handling. This is not a critical location, but rather a rule of thumb. All knuckles are bent to 57 degrees. All angles are calculated on a perfectly flat and level deck. Wedges will be required on many installations to make up for deck camber.
Part No: 313103
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->TLD Lever Drag Reels
The TLD finds favor among anglers who value function, simplicity and reliability in the hunt for big fish. The TLD has changed little in design since its introduction, precisely because there is so little to improve. The single-speed, lever drag design make it straightforward and easy to use and maintain—putting less between you and the catch of the day. Type: Conventional . Material: Graphite/Aluminum . Drag: Lever . Ball Bearings: 4. Gear Material: Stainless steel . Handle: Right Hand .
Part No: TLD 15
|
|
|
|
Home -> Fishing -> Reels->Level Wind Reels
Levelwind operation lets you concentrate more on fishing and less on detangling line. HT-100 star drag . Powerful brass.
Part No: 0009-0083
|
|
|
|
Home -> Fishing -> Reels->GTi Super Level Wind Reels
Lightweight graphite frames and ball-bearing glide make these a premium choice in level winds. Oversized HT100 multi-disc star drag, precision machine-bronze and stainless gearing, sealed stainless steel ball bearings, lightweight anodized spools, counterbalanced handles and a loud, easy-to-service clicker. The new 32OLD is the first to combine lightweight graphite construction, level wind performance and Penn's lever drag system. Type: Level Wind. Drag: Lever, waterproof. Features: Clicker.
Part No: 1152021
|
|
|
