Top Sellers
Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
|
256 Piece Stainless Steel Machine Screw Kit from WEST MARINE
A complete selection of popular phillips pan and oval head machine screws with matching nylock nuts, hex nuts and flat washers. 8-32 x 1/2", 3/4", 1", 1 1/2" & 2". 10-24 x 1/2", 3/4", 1", 1 1/2" & 2".
|
216 Piece Stainless Steel Tapping Screw Kit from WEST MARINE
A complete selection of popular phillips pan and oval head tapping screws. #6 x 1/2", 3/4", &1". #8 x 1/2", 3/4", 1", 1 1/4", &1 1/2". #10 x 1/2", 3/4",1", 1 1/4",1 1/2" & 2".
|
12V Grouper Bait/Fish Box Pump, 5A Draw from WHALE PUMPS
Designed for baitwell or fish box pumpout, this reliable pump features valves that won’t choke on fishy remnants at the end of the day. Capacity is more than ample at 6. 8 gallons per minute and it is self-priming to 10 feet. Installation is made easy by the pump’s ports which rotate 360°. Includes fittings to accommodate 1" or 1 1/2" hose. gpm: 6. Self-Prime: 10' . Material: Aluminum, glass-filled nylon, Santoprene® diaphragm. Dimensions: 6-3/4"W x 10-3/4"L .
|
Small Cockpit Bag, 12" x 10"; 1 Main & 1 Mesh Pockets from BLUE PERFORMANCE
Keep sheets, tools and other gear organized and handy Keep your cockpit clutter-free with these multi-pocketed cockpit organizers. Made of durable UV-protected nylon, they feature a large main pouch with cinchable sides to keep decks clear of lines, water bottles and gear. A stowable rain cover pulls over the main pouch to protect contents while an outside mesh pocket grants easy access to snacks or sunscreen. The large size has a third pocket with closure to keep extra items secure.
|
24V Grouper Bait/Fish Box Pump, 2.5A Draw from WHALE PUMPS
Designed for baitwell or fish box pumpout, this reliable pump features valves that won’t choke on fishy remnants at the end of the day. Capacity is more than ample at 6. 8 gallons per minute and it is self-priming to 10 feet. Installation is made easy by the pump’s ports which rotate 360°. Includes fittings to accommodate 1" or 1 1/2" hose. gpm: 6. Self-Prime: 10' . Material: Aluminum, glass-filled nylon, Santoprene® diaphragm. Dimensions: 6-3/4"W x 10-3/4"L .
|
Midrail Cleat, Fits 1-1/4" x 3/16" Track, 5/16" Pin Dia., 5/8" Max. Line Size, 4500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.
|
12.5 Aft Dual Mount Universal Satdome from SEAVIEW
12. 5" Dual Mount for KVH M5 / F33 (18") / FB250 (18") / Tracphone 50, Intellian i4, Raymarine 45STV, Seaking 9818RJ / 1800HD, Seatel Coastal 18/24 / 1898 / 2098 / 2494 / 2498 / F33/F55 / MSV2000 & 2kW or 4kW Radome. Accepts Light Bar:Yes. Height of Radar Plate (Midplate): 3. 9". Height of Satellite Plate (Top Plate): 13. 1". Overall Height (Base To Top of Light Bar): 38. 2". Base Dimensions:10″ × 10″. Color:White.
|
Single Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Triple Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Single Sheave, No Cleat, 2:1 Purchase, 300lb. SWL from HARKEN
These end controls fit on all Harken Small Boat track. Low-profile, high-strength and lightweight, these can be used in 2:1, 3:1 or 4:1 purchase systems. Easy installation with the turn of a screw. Sold in pairs. Track Type: Fits all Small Boat track. Material: One-piece aluminum base. Ball Bearings: Carbon-black Delrin. Sheave Size: 1-1/8" (29mm). Length: 3-7/16" (87mm).
|
Double Powerclutch, 1/4"–1/2" Line Dia., 1,250lb. MWL from SPINLOCK
Positive one-way locking clutches for easy release and relocking Reliable, lightweight, and powerful enough to handle high loads with outstanding line control. Features improved lever action, soft-feel handles for comfort, excellent line gripping and improved release. Application: Racers up to 27' and cruisers up to 35' . Height: 2-3/4" (69mm) . Length: 5-3/16" (134mm) . Width: Single: 1-1/2" (39mm); Double: 2-9/16" (65mm); Triple: 3-5/8" (91mm) .
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
700FF To 35' 5 3/4" 7" 9 5/8" 1/2" 1/4" HT 700lb. 35A (175 lb. load) 88' (175lb.) Free fall from LEWMAR
They feature controlled "lockoff" to start or stop anchor free-fall by simply pressing the "up/down" switch. This free-fall operation can also be disengaged to power down. Includes a new stainlesssteel fleming/stripper that withstands heavy loads. All come complete with Switch Gear and Installation kit. As an additional feature, in an emergency involving loss of power these windlasses can be operated manually with a standard 1/2" ratchet handle (sold separately).
|
2200gph Pump, 1-1/8" & 1-1/4" Port Sizes, 8.6A @ 12V DC, 7"H x 4-1/4"dia. from JOHNSON PUMPS
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
|
|
10 1, 10-1, 10 ft, 10 Oz, from SCHAEFER, from ANDERSEN, Pk from ANCOR MARINE
|
This site contains about 40,764 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,188
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,220
1,230
1,240
1,250
1,260
1,270
1,280
1,290
1,300
1,359
|
|
|
Sailboat -> Rigging Products->Eye Terminals
Norseman Swageless Terminals provide a completely secure end fitting on conventionally constructed strand, Dyform strand or 7-strand wire. They can be rigged at sea in minutes without special tools and can be inspected simply by unscrewing the assembly. The standard terminal can be used on 1x19 strand, 1x19 Dyform and 7-strand rope, using the appropriate cones. 316 stainless steel. Hole center to wire end. Terminals are reusable, but they must have a new cone.
Part No: N010-M0308
|
![1" Square White Jaw Slide from TAYLOR](http://images.westmarine.com/thumb/018_543_004_511 .jpg "1" Square White Jaw Slide from TAYLOR")
|
|
Seating & Covers -> Covers & Biminis->Square Tube Bimini Top Hardware
Hardware for mounting biminis, including a universal mount for use when mounting on a flat surface isn't possible.
Part No: 11830
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551610
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551710
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321484
|
|
|
Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601100
|
|
|
Electrical -> Switches, Fuses & Accessories->ATM Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 603910
|
|
|
Electrical -> Switches, Fuses & Accessories->ATO/ATC Automotive-Style Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 604010
|
|
|
Electrical -> Switches, Fuses & Accessories->GMA Marine Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 605100
|
|
|
Electrical -> Switches, Fuses & Accessories->Slow-Blow MDL Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 602100
|
|
|
Electronics -> Video, Stereos, Weather Radios->MRD-70 AM/FM/CD/MP3 Multi-Zone Component Stereo System
Put stereo sound in every cabin, and get an intercom to boot!The MRD-70 AM/FM/CD Receiver and RD44 Display are the foundation for an expandable multi-zone system that offers independent control in up to four zones with the RD44 Remote Display and MZ100 Amp in each zone. Easily connected through a single watertight DIN type cable, each remote has independent control over the audio input source. 20'L extension cable and 4" x 4" display suitable for flush or gimbaled mounting.
Part No: ICC-10
|
|
|
Electronics -> Fishfinders -> Transducers and Accessories
Too much distance between your transducer and fishfinder/sounder? Here's 10 feet of cable to bring them together.
Part No: 010-10715-00
|
|
|
Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 108099
|
|
|
|
Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 188003
|
|
|
|
Electrical -> Electrical Wire->Primary Wire by the Spool
Ordinary automotive-type wire can suffer a loss of conductivity after a few months in the marine environment, caused by corrosion and/or vibration. Premium Ancor wire will provide a lasting solution for your sophisticated marine electronics and instruments to operate at peak potential. 600V . 105°C dry, 75°C wet . Rated for oily and wet environments . Type 3 stranded, with 5–10 times more copper strands than Type 2 . Marine UL-listed, and meets the highest ABYC standards for AC or DC use .
Part No: 108850
|
|
|
|
Electrical -> Electrical Wire->Primary Wire, Mini Spools
Sophisticated marine electronics and instruments only operate at peak potential when supplied with power at the right voltage, and that necessitates high-quality wire. Ordinary automotive-type wire can suffer a loss of conductivity, caused by corrosion and/or vibration, after a few months in the marine environment. Finally, Ancor wire is based on AWG (American Wire Gauge) wire sizes, which are 6–12% larger than SAE gauge wire, so you get more current-carrying ability than from similar SAE wire.
Part No: 188803
|
|
|
Engine Systems -> Engine Parts->Spin-On Series Diesel Fuel Filters/Water Separators
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Part No: 120RMAM2
|
|
|
Engine Systems -> Engine Parts->10 Micron Replacement Filter Elements
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7945
|
|
|
|
Engine Systems -> Engine Parts->10 Micron Replacement Filter Elements
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7944
|
|
|
|
Engine Systems -> Engine Parts->10 Micron Replacement Filter Elements
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7946
|
|
|
|
Engine Systems -> Engine Parts->10 Micron Replacement Filter Elements
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7989
|
|
|
|
Engine Systems -> Engine Parts->10 Micron Replacement Filter Elements
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7866
|
|
|
|
Engine Systems -> Engine Parts
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
|
|
Cabin & Galley -> Appliances & Cookware
Made of polycarbonate, this clear drinkware may last you a lifetime. Manufactured to a brilliant finish, it has the look and weight of crystal, but it won't crack or craze like acrylic can. Strahl is specially treated to withstand repeated dishwasher cleaning and is microwave-safe. Its thermal qualities keep your hot drink hot, yet allow you to hold the glass without burning your hands. Champagne and wine glasses have screw off bases for easy storage! Sold individually. Mfr.
Part No: 20214
|
|
|
Cabin & Galley -> Appliances & Cookware
The quality and value you've come to expect from all Magma products now in an 18-10 stainless steel cookware set that nests for storage in less than 1/2 cubic foot of cabinet space. The set includes three Sauce Pans (1-1/2 qt. ), a Lid that fits all three saucepans, a 5 qt. All have triple clad bottoms (stainless steel, aluminum, stainless steel) and are milled perfectly flat for even heat distribution on gas, electric or ceramic cooktops. All the cookware is oven safe and dishwasher friendly.
Part No: A10-360L
|
|
|
Sailboat -> Blocks
High-load, high-strength block has a Universal Circuit (UC) sheave system with multiple friction-reducing bearing components, so the block has considerably less friction than conventional roller blocks, and actually becomes more efficient as you use it. The stainless head swivels or is fixed with a three-way locking fixture. Sheave: Aluminum UC for wire or line . Ball Bearings: Nomex Teflon® high-impact glass-fiber. Sheave Size: 3-1/4" . Max Line Dia. Wire Dia. : 1/4" Max.
|
|
|
Cabinet & Deck Hardware -> Hatches & Ports -> Deck Hatches->Low-Profile Hatches
Now Lewmar has created a two-piece frame with tough, gray acrylic that can be replaced simply by unscrewing the frame and inserting the new lens. The seal and acrylic are fitted into the aluminum frame to produce a stronger, more leak-proof hatch. All hatches feature a vent position, flange base and sizes 30 and larger have lockable internal and external handles for added security. CE Area II approved. Low-profile hatches have 8mm acrylic in sizes 00 through 54, and 10mm acrylic in size 60.
Part No: 39910030
|
|
|
|
Sailboat -> Blocks
High-load, high-strength block has a Universal Circuit (UC) sheave system with multiple friction-reducing bearing components, so the block has considerably less friction than conventional roller blocks, and actually becomes more efficient as you use it. The stainless head swivels or is fixed with a three-way locking fixture. Sheave: Aluminum UC for wire or line . Ball Bearings: Nomex Teflon® high-impact glass-fiber. Sheave Size: 3-1/4" . Max Line Dia. Wire Dia. : 1/4" Max.
Part No: 10-05-UC
|
|
|
Sailboat -> Winches -> Non Self-Tailing Winches->Andersen Single Speed Winches
If you’ve ever had the pleasure of sailing or racing aboard a boat equipped with Andersen winches, then you know you really can feel the difference when uncompromising quality is built in. The self-tailing arms are curved to give a fair lead, so friction is minimized. Lightweight stainless drums, combined with aluminum bronze internal construction, results in a winch that actually weighs the same or less than aluminum winches of similar size. Ball Bearings: Stainless ball and roller bearings .
Part No: 99M 50010
|
|
|
Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2076R
|
|
