Top Sellers
Fiberglass Boat Repair and Maintenance - Book from WEST SYSTEM
WEST SYSTEM® Technical Books—Guide you through a wide range of projects and repairs These books are chock-full of important of information on recommended product usage, applications, and step-by-step instructions for a wide variety of projects, including blister repair, deck reinforcement, lamination repair, closing of punctures and holes, dry rot repairs and more. Specific step-by-step instructions. Helpful illustrations.
|
Impeller article number 09-821B from JOHNSON PUMP
Impeller-Fuel Transfer Nitrile|Impeller-Fuel Transfer Nitrile.
|
F8B-9 Direct Bolt-On Engine Cooling Pump, Detroit Diesel OEM from JOHNSON PUMPS
Used by premier marine engine manufacturers including Volvo Penta, Westerbeke, Yanmar and MAN, Johnson Pump is a leading provider of cooling pumps to OEMs worldwide. The pumps feature bronze housings, flexible impellers and different port sizes that satisfy a variety of cooling needs with flows between 3 and 165 g. p. m.
|
G/Flex 650 Hardener 4.75 Gal. from WEST SYSTEM
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex offers these important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. .
|
G/Flex 655 Resin 4.75 Gal. from WEST SYSTEM
G/flex 655 Thickened Epoxy Adhesive comes with a thickening agent already added. G/flex offers important features: Toughness and Flexibility G/flex has been toughened. With a modulus of elasticity of 150,000 psi (WEST SYSTEM 105 Resin/205 Hardener has a modulus of elasticity of 450,000 psi), G/flex is more flexible and can deflect further than WEST SYSTEM 105/205, while being much stiffer than typical adhesive sealants. Bonds to wet and damp surfaces G/flex has the ability to glue damp woods.
|
Impeller 09-812B - For pump size F6B from JOHNSON PUMPS
More durable, longer lasting replacement pump has a one-piece bronze body and bronze end-plate with a replaceable cam and wear-plate so it can be rebuilt when needed.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
Soy Shaker from JOHNSON PUMPS
PRP SpillBuster Soy is a unique 100% natural and biodegradable oil spill cleanup tool. It absorbs petroleum hydrocarbons, floats with the contamination on the surface and stimulates indigenous microbes to biodegrade the oil (and itself) into CO2 and water. PRP can be used to remediate contaminated soil as well. Simply sprinkle the PRP powder on the contaminated area and watch it disappear. No residue remains! Coverage: 100sq/ft per lb. at 1/16" thick.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
#875 Scarfer™ from WEST SYSTEM
Use to create scarf joints like a pro A unique tool designed by Gougeon Brothers for cutting accurate scarf joints in plywood up to 3/8" thick.
|
Water Circulating Pump - #18-3581 - Chrysler Inbd # 3004886, 3619542, 3619859, 3745985 from SIERRA
Water Pumps The water pump is the heart of your inboard or I/O cooling system. All Sierra pumps are bidirectional and can be installed on reverse rotation engines. The pumps are also powder coated for additional protection. Includes mounting gasket. Pumps include brass bi-directional impellers, brass plugs and fittings, carbon resin seal, all mounting gaskets, stainless steel seal cup and spring, stainless steel back plate (where required), and powder coating for maximum corrosion protection.
|
|
|
|
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
|
from HARKEN, from WEST SYSTEM, from JOHNSON PUMPS, 2"H from LEWMAR
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,100
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,189
1,190
1,191
1,192
1,193
1,194
1,195
1,196
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,220
1,230
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->400 Cables
For pre-1979 Johnson/Evinrude/OMC engines. Engine-connection kit not included. Measure tip-to-tip for length. Stainless core. 8" bend radius.
Part No: CC17009
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Tongue Jacks
For dinghy, PWC, utility trailers and light boats up to 12'L. All-steel construction with silver powder-coat that's rated for up to 300 hours of saltwater exposure. Fast, easy swivel jack operation. 6" thermoplastic caster wheel. Provides 14" lift. Fits tongues 3"W x 5"H . 400lb. capacity. Mounting hardware included .
Part No: 1410000149
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->Engine-Specific Connection Kits for OEM Cables
For 1973-1978 OMC original equipment style “400” type cables with bare wire ends. For use with two cables.
Part No: CA27247P
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Accessories->Engine-Specific Connection Kits for OEM Cables
For 1973-1978 OMC original equipment style “400” type cables with bare wire ends. For use with two cables.
Part No: CA27208P
|
|
|
|
Home -> Engine Systems -> Engine Parts->200 & 400 Series Spin-On Replacement Elements
For Racor Spin-On Series Diesel Fuel Filter/Water Separators.
Part No: S3204TUL
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
CR5 Pentabeam™ II Bulb Replacement bulb for Golight® Stryker™ Unit 400,000 candlepower. 60% more useable light. Eliminates dark spots. Reaches distances to one-half mile.
Part No: 39000
|
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting
Use with Golight's West Marine Models 370356, 370364, 1568948, 1568898, 1568989, 375900 & 2702454.
Part No: 49000
|
|
|
|
Home -> Fishing -> Reels -> Conventional Reels->Graphite GS Casting Reels
Each GS reel features a lightweight, one piece graphite composite frame - with corrosion resistant metal inserts in the front and rear spacer bars - for high strength and precision alignment. Strong and durable black anodized aluminum spools. Precision machined stainless steel pinion gears, bronze alloy main gears . Four aircraft quality stainless steel ball bearings . Penn's powerful HT-100™ multi-disc drag system. Ergonomic star drag wheel that lets you easily fine tune the drag setting.
Part No: 0009-0609
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->4000 UV Polyether Adhesive Sealant
Excellent for sealing between mechanically fastened joints on wood, fiberglass, metal and most plastics4000 UV Polyether Adhesive Sealant@Body Text:Resistant to weathering, salt water and stresses caused by joint movement. White, non-yellowing formula is ideal for above and below waterline applications where aesthetic appeal is a priority. Applications include sealing deck to hull joints, thru-hull fittings, window and door frames,etc. Recommended Usage: Fiberglass, wood, metal, some plastics.
Part No: 06580
|
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives->4000 UV Polyether Adhesive Sealant
Excellent for sealing between mechanically fastened joints on wood, fiberglass, metal and most plastics4000 UV Polyether Adhesive Sealant@Body Text:Resistant to weathering, salt water and stresses caused by joint movement. White, non-yellowing formula is ideal for above and below waterline applications where aesthetic appeal is a priority. Applications include sealing deck to hull joints, thru-hull fittings, window and door frames,etc. Recommended Usage: Fiberglass, wood, metal, some plastics.
Part No: 05280
|
|
|
|
|
Home -> Paint & Maintenance -> Caulking & Adhesives
Excellent for sealing between mechanically fastened joints on wood, fiberglass, metal and most plastics4000 UV Polyether Adhesive Sealant@Body Text:Resistant to weathering, salt water and stresses caused by joint movement. White, non-yellowing formula is ideal for above and below waterline applications where aesthetic appeal is a priority. Applications include sealing deck to hull joints, thru-hull fittings, window and door frames,etc. Recommended Usage: Fiberglass, wood, metal, some plastics.
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Heavy-Duty 1600, 2200 & 4000 GPH Pumps
Designed to meet and exceed the tough demands of commercial and recreational duty, these pumps feature a 12-pole motor with double ball bearings for extended service life. 2200 and 4000 GPH models incorporate a mechanical seal design that eliminates shaft wear. Outlet port check valve included for optional use. Features: Double ball-bearing motors for extended service life . Type: Submersible centrifugal electric bilge pump . Port Sizes: 1-1/8"–2" . Built-In Switch: No .
Part No: 40004
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Questus Self-Leveling Radar Antenna Mounts
The hydraulic pivot dampener prevents any oscillation in all sea conditions. The majority of backstay mountings require no modification to the boat or rigging and can be adapted to accommodate a split backstay. For backstay applications, choose a gimbal and a backstay tube. 18" radomes: Use Model 400G backstay gimbal, or 500G pole mount. 24" radomes: Use Model 100G backstay gimbal, or 300G pole mount. For backstay applications, choose a backstay gimbal and a backstay tube.
Part No: 102520-000
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056540
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Portable Modified Sine Wave Inverters
Convenient, quiet house current from any boat battery! Converts 12 volt energy from your battery to 110V AC energy to power small loads such as power tools, cell phones, laptop computers and more! Quiet operation 700W models feature DC terminals for direct battery connection. The 150W and 400W inverters include a cigarette lighter plug. The 700W model includes battery clips or can be hardwired. Overload protection, input short-circuit protection, thermal and low-battery shutdown (10.
Part No: 2003-6
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Wind/Water Chargers->Air Breeze Wind Generator Accessories
Accessories for Air Breeze Wind Generator.
Part No: 3-CMBP-1022-2
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Barrier Coats->404/414 Epoxy Primekote
Versitile primer for all topside finishesMultipurpose, two-part epoxy primer for use above or below the waterline. Good enamel holdout, sands freely but does not sand through easily, and provides an excellent base for all topside finishes. Resurfaces cracked gel coat prior to application of enamel. Recommended Usage: Above water, primer for Perfection two-part, sanding surfacer for cracked/crazed gelcoat. Formulation: Multi-purpose two-part epoxy primer. Coverage: Brush: 112sq. ft/qt, 450sq.
Part No: Y404KIT/1
|
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Barrier Coats->404/414 Epoxy Primekote
Versitile primer for all topside finishesMultipurpose, two-part epoxy primer for use above or below the waterline. Good enamel holdout, sands freely but does not sand through easily, and provides an excellent base for all topside finishes. Resurfaces cracked gel coat prior to application of enamel. Recommended Usage: Above water, primer for Perfection two-part, sanding surfacer for cracked/crazed gelcoat. Formulation: Multi-purpose two-part epoxy primer. Coverage: Brush: 112sq. ft/qt, 450sq.
Part No: Y404KIT/QT
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#406 Colloidal Silica
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface.
Part No: 406-2
|
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->#406 Colloidal Silica
406 Colloidal Silica is a thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture, ideal for general bonding and filleting. It is also our most versatile filler. Often used in combination with other fillers, it can be used to improve the improve strength, abrasion resistance, and consistency of fairing compounds, resulting in a tougher, smoother surface.
Part No: 406-7
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass
A thickening additive used to control the viscosity of the epoxy and prevent epoxy runoff in vertical and overhead joints. 406 is a very strong filler that creates a smooth mixture ideal for general bonding and filleting. WEST SYSTEM'S most versitile filler.
Part No: 406B
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Imperial Sanding Discs
3M's premier Imperial abrasive discs feature the original Hookit™ attachment system. Convenient hook and loop system maximizes disc life by giving the user the ability to change grits without contaminating disc backing or dual action pad face. "Imperial 6" E-weight backing provides faster, more aggressive cut. Hookit™ 8" Regular No-Hole, E-Weight Paper Backing, 25 Disc Qty. Hookit™ Regular No-Hole E-Weight Paper Backing, 25 Disc Qty.
Part No: 01734
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->™ Imperial Sanding Disc
3M’s best abrasive offers improved aluminum oxide and the tough Cubitron mineral blend for exceptionally fast cut. The improved paper backing is the most durable and has the longest life. The purple color indicates the highest standard of quality. Imperial E-Weight backing provides faster, more aggressive cut. 40-grit. Package of 50 discs. 3M’s best abrasive purple for highest quality . Imperial E-Weight backing for fast, aggressive cut. 6"diam.
Part No: 00373
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Assorted Power and Data Cables
A variety of cables for Garmin products.
Part No: 010-10552-00
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: P040
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Performance2 Anchors
We believe we actually improved on several aspects of the original designs of Bob Ogg and Richard Danforth. Our compact crown assembly provides low penetration-resistance and keeps the fluke angle at a precise 32° with a rugged, die-stamped crown and shank engagement. The characteristics we did not change include the ''T'' section flukes for symmetry and strength, high-strength 4130 steel flukes, shank and crown and quality galvanizing without flakes or sharp spikes of zinc.
Part No: 94080
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP040
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories->Carbo Furling Lead Block Assemblies
These stanchion lead blocks have free-rolling ball bearings to lead line aft for safe furling from the cockpit. Use the 7401 40mm block on the bow pulpit as an inboard lead. The 7402 features a ratchet to control spooling when unfurling. The 7401 and 7402 have ball and socket bases to align blocks for smooth leads aft. The 7403 has a 29mm sheave and allows the furling line to travel outboard of the stanchion to keep the side deck clear. Mounts to stanchion with a four-screw clamp.
Part No: 7401
|
|
|
|
Home -> Sailboat -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2614
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->40mm Carbo Ratchet Blocks
Control loaded lines with ease Lightweight Carbo Ratchets are available in 40mm, 57mm, and 75mm sizes. The 40mm blocks are perfect for jibsheets and spinnakers on small dinghies where size and weight are critical. 57mm and 75mm sizes have many configurations to fit jibsheets, spinnakers, and mainsheet systems on boats ranging from dinghies to large sportboats. The Cheek Block is also switch-controlled. The 40mm cam-arm versions work in ratchet mode only. Sheave Size: 1-9/16" (40mm).
Part No: 2611
|
|
|
