Top Sellers
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
|
1/8" NPT X 5/16" Brass hose barb from MOELLER
1/8 NPT X 5/16" Brass hose barbs with male threads.
|
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
|
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
Sanding Discs - 5" Velcro-Backed, 40-Grit, 5 Pack from 3M PRODUCTS
Convenient hook and loop disk attachmentAdapts a 1/4” or 3/8” electric drill so it may be used as a 5” disc sander. Includes three Velcro-backed sanding discs (120-, 80- and 40-grit). Recommended Usage: Sanding fiberglass/gelcoat, paint, wood and metal. Abrasive Material: Aluminum oxide. Backing Type: Hook and loop . Disc Size: 5" disc .
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
|
Fuel Line - 5/16" - Universal from MOELLER
Each assembly comes complete with a large alcohol resistant primer bulb with fittings, co-extruded braided fuel line hose which is alcohol resistant, and barb connectors which can be used with large, as well as small engines. Assemblies use a compounded, tough & pliable UV-resistant hose. Promotes maximum fuel flow. Includes fittings built to OEM Specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections. Specifications: 5/16".
|
|
5, 5 1, 5 Qty, from SCHAEFER, 5 Series Block, 5 Hole Gasket from MOELLER
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,197
1,198
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,230
1,240
1,250
1,260
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Finish Line™ by the Foot
Finish Line™ is a 100% pre-stretched polyester with an 8-strand “nubby” cover and continuous filament core. The low-stretch, high-strength characteristics of this rope make it ideal for halyards, cunninghams, and topping lifts, among other applications.
Part No: 3680-04-00600
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->Platinum Series Flush Mount Speakers
Three-way speakers for rich, crisp soundThe Platinum Series are high power, waterproof speakers that offer superior sound for discriminating listeners who demand the best audio quality. They are the first truly waterproof, full-range marine speakers to offer the performance of a home stereo system, plus the construction to withstand the most severe effects of sun and salt water. Speakers handle 200W peak per pair (except the 6 1/4" round speakers, which are 160W peak). Impedance: 4 ohms .
Part No: MA6500W
|
|
|
|
Home -> Fishing -> Fishing Accessories->Stainless Steel T-Tops & Accessories
Stainless Steel T-Tops & Accessories Standoffs, canvass, electronics box and storage bag sold separately.
Part No: 52408
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551605
|
|
|
|
|
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
Part No: 551705
|
|
|
|
Very common pushbutton breakers for DC loads. Uses two-blade terminals. Mounts in 3/8" hole. Can be used with a waterproof boot over the button. Buttons are white. Switch Type: Pushbutton . Voltage Compatibility: DC . Safety Features: Waterproof boots available . Housing Material: Plastic . Housing Dimensions: 1. 75" x 1.
Part No: 5321476
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601050
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATM Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 603905
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->ATO/ATC Automotive-Style Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 604005
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->GMA Marine Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 605050
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Slow-Blow MDL Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 602050
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005898
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005090
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005096
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005086
|
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->ECO Fuel Containers
A new generation of jerry jugs, these special fuel containers feature a spill-proof fueling system that meets new, tough ARB regulations in CA, NY, MD, DE and PA. Those environmental regulations prohibit the sale of open, vented fuel cans within the state. Containers are made from HDPE and DuPont’s Selar RB Barrier resin to meet strict permeation requirements. The ECO Spout is easy to use and helps to prevent spills. Fuel flow will automatically stop when the container is full.
Part No: 005092
|
|
|
|
Home -> Engine Systems -> Fuel Tanks->Gasoline Containers
Flexible spouts stored inside the container make pouring easy and the tanks’ unique shapes keeps their centers of gravity low to prevent tipping. Large, easy-to-grip handles make carrying easy. Security straps keep caps and filler from being lost.
Part No: 007622
|
|
|
|
Home -> Engine Systems -> Fuel Tanks
5 Hole Gasket for Electric and Mechanical Sending Units.
Part No: 035728-10
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Low Amperage Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 9218
|
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 9217
|
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 9216
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Prefilters
These polyester prefilter cartridges help filter out larger sediment to ease the demands placed on your watermaker.
Part No: 8012861
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Rags, Gloves And Buckets
Handy small pail with many usesCompact plastic pail for small jobs. Usefull for mixing paint and for brush and tool cleanup.
Part No: 61080
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-11
|
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-31
|
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-05
|
|
|
|
|
Home -> Sailboat -> Blocks->5 Series Ball-Bearing Blocks
Like the 5 Series blocks, but with Schaefer’s ball bearing sheave. Curved ball races allow Schaefer ball bearing blocks to take higher loads than other similarly sized blocks. Sheave: UV-protected white Delrin¨. Ball Bearings: Delrin. Sheave Size: 2" (51mm). Line Dia. : 7/16" max. . Cheek Material/Finish: Black anodized aluminum or polished stainless cheeks, stainless straps.
Part No: 506-32
|
|
![5 Series Block, Cheek, Flat Base, Aluminum, 5.9oz. from SCHAEFER]( "5 Series Block, Cheek, Flat Base, Aluminum, 5.9oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-11
|
|
![5 Series Block, Cheek, Flat Base, Stainless, 6.9oz. from SCHAEFER]( "5 Series Block, Cheek, Flat Base, Stainless, 6.9oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 505-11
|
|
![5 Series Block, Double with Becket, Aluminum Cheeks, 9.1oz. from SCHAEFER]( "5 Series Block, Double with Becket, Aluminum Cheeks, 9.1oz. from SCHAEFER")
|
|
Home -> Sailboat -> Blocks->5 Series Universal Head Blocks
Used extensively for sheet blocks on small to mid-sized keelboats and as control line blocks for larger offshore boats. Suitable as mast-base or lead blocks on small to mid-sized boats. Universal three-way head. Black anodized aluminum or stainless cheeks. Stainless straps and posts. Sheave: UV-protected Delrin. Ball Bearings: Plain bearings . Sheave Size: 2" (51mm) . Line Dia. : 7/16" max. .
Part No: 504-35
|
|
|
