Top Sellers
Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
|
|
WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
Uni-Fid for Splicing Braid from NEW ENGLAND ROPES
Two sizes make for neater, smoother splices. One fid is for 1/4"–3/8" line; the other is for 7/16" and larger line. Packed in a plastic storage tube.
|
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Brightside Pre-Kote Primer - Gray, Quart from INTERLUX
Fills minor blemishes and sands easilyOne part primer for use with Brightside or any other one-part topside enamel. Microspheres provide high build and improved sandability. (Replaces Brightside Primer and 279 White Undercoater. ) Application: Brush, roller, airless/conventional spray . Number of Coats Recommended: One or two, depending on surface condition. Drying: Overcoating: 6 to 12 hrs. Drying Time: To touch: 1 to 3 hrs. Coverage: Brush: 112 sq. ft/qt, 450 sq. ft/gal; Spray: 87 sq.
|
Compact Horn w/ Black Cover 10023 from AFI
Stainless steel diaphragm and mounting bracket . Black polypropylene cover . Dimensions: 4 inches L x 3-3/4 inches W x 2-3/4 inches H . Maximum amp draw: 4 Amps . dB(A) rating: 108 at one meter Fundamental frequency: 350±15 .
|
Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
|
DC Digital Voltmeter with Alarm from BLUE SEA SYSTEMS
Displays voltage from 0 to 60 Volts High and low voltage audio and visual alarms 3 levels of display brightness Programmable sleep mode blanks display for power conservation Splashproof front Applicable for 12, 24, 32, 36, and 42 Volt DC systems Specifications: Input Voltage: 7-60 Volts DC . Display Character Size in inches (mm): 9/16 (14. 29) . Minimum Power Consumption: 0. 60 Watt . Depth in inches (mm): 3. 40 (86. 36) . Maximum Power Consumption: 1. 00 Watt . Height in inches (mm): 2.
|
|
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Boater's Pocket Reference from ROBERT HALE
Thomas McEwen. A pocket-sized alternative to Chapman, jam-packed with information boaters need to know! Includes a wealth of how-to info, plus reference facts, figures, formulas, graphs and tables about boating. Paperback . 3 1/4"W x 5 3/8"H x 15/16"D. . 766pp.
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
|
5, 5-1, 5-3, 5-Step, 5-Stud, 2" x 5-1, 38" x 5" x 2, 38" x 5" 2, 5" Bolt Pattern
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,199
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,230
1,240
1,250
1,260
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Light-Duty Block Hangers
Forged stainless-steel construction.
Part No: 90-12
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers->Wireless Remotes for Windlasses
Works with all Lewmar windlasses that use a control box/solenoid. Using over one billion individual codes, the proprietary encryption scheme prevents false triggering from any other device or similar fob. Three-button version works with a single windlass. Five-button version can operate a second windlass or bow thruster. Fobs float and are waterproof to IP67 (1 meter deep).
Part No: 68000845
|
|
|
|
Home -> Electrical -> Meters & Distribution->Covers for Standard DualBus 100A
Covers for Standard DualBus 100A.
Part No: 2709
|
|
|
|
Home -> Electrical -> Electrical Wire -> Specialty Wire
For mast cables and other applications requiring five conductors. Round white jacket. Nominal diameter: 1/2”. Sold per foot. Wire Type: Multicable . Construction: Tinned Copper. Conductors (Color and # of): 1 White, 1 Blue, 1 Black, 1 Red, 1 Green . Color of Exterior Insulation: White. Wire Gauge: 14-5 .
Part No: 155010
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Pneumatic Liquid Level Monitor Senders
PTS Senders (threaded): 1-1/2" NPT threaded pneumatic tank sender, 12" for freshwater and holding tanks PFS Senders (flanged, standard 5 bolt pattern): 5-Hole flanged pneumatic tank sender, 12" for freshwater and holding tanks Pneumatic LLM-2 Owners Manual and Installation Instructions.
Part No: PFS-12-R
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Trailer Connectors and Adapters
West Marine provides a wide variety of trailer connectors & adapters at affordable prices. Model 7066228 For use with high amp trailers. Used on European style vehicles where vehicle wiring cannot support additional load of trailer lights. Suggest use with West Marine Model 7066087, 7-Pin Heavy Duty Trailer Socket. Model 7066095 Can be used as 48" extension or cut for connectors. Model 7066038 7-Way RV Blade to 4-Wire Flat Adapter Model 7066079 For trailers with electric brakes.
Part No: D5102-48 inch
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->A-Series Toggle Branch Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8401
|
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->A-Series Toggle Branch Circuit Breaker Panels
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions.
Part No: 8081
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lights, Wiring->Coiled Electrical Trailer Connectors
Jet Connex™ Trailer Connectors are coiled, jacketed power cables with customized connectors on each end that replace flimsy wires that hang down between your vehicle and trailer. The plug-and-tow coiled cord with molded connectors on each end provides a strong and reliable connection for running lights, turn signals and brakes. Wire jacket is water- and abrasion-resistant. Molded connectors feature integral cable strain relief, eliminating broken or shorted wires. Each measures 20"L.
Part No: 1334605
|
|
|
|
Home -> Seating & Covers -> Seating
Custom contours, individual lumbar supports and thigh support, plus a padded headrest and swing-away arms, make this the king of seating comfort. Chair only. O. D. : 26 1/2"W x 31"H x 30"D. I. D. : 19 3/4”W x 25”H x 19 1/2”D. Hardware sold separately. Pedestal for 5 Star chair (sold separately). Base option for the 5 Star chair (sold separately).
Part No: U9705BE
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Orange, 11. 75"W polycarbonate steps collapse into a 6"H bundle for easy storage. Steps are connected by nylon rope with a top loop that quickly secures to cleat or railing.
Part No: 582501-1
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
Galvanized (silver) finish protects against rust and corrosion in salt water. 5 Step. 71"H. 18"W step.
Part No: 28275
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Fiberglass Dock Steps
These attractive, practical dock steps have a durable, glossy UV-resistant fiberglass finish that won't yellow or fade and compliment even the finest yachts. Nonskid treads for safe boarding. Steps can be fastened to the dock or other flat surface.
Part No: 500S
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Floating Dock Lifting Ladders
D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion All welded construction for strength Floating Dock Lifting Ladder stores upright completely out of the water New double-rung locking mechanism results in the sturdiest lifting ladder in the industry Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges Rated for 665 lbs.
Part No: FL-5
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Gunwale-Mount Ladders
Handrails rise 5" above-deck to provide secure handholds. Allows you to “walk through” to the deck. The cushioned standoffs can be cut to fit hull contours. Bottom steps fold up for compact storage. Additional mounting brackets are available for multiple mounting locations. Mounting Style: Deck bracket mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Width: 13. 75"W (outside dimension) .
Part No: WML-3-2-12-DFRM
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Removable Transom Ladders
These unique ladders can be left in place when underway, or removed quickly for storage. Standoffs can be cut to fit transoms at conventional or reverse angles. Each ladder includes one pair of mounting sockets. 13. 75"W. Mounting Style: Removable transom-mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Mounting Hardware: Pair of mounting sockets included . Fastener Size Required: Eight 1/4" RHMS (sold separately) .
Part No: WM-L-3-2-12-D-F
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Ladder Platforms
With an underwater platform at the bottom, these innovative ladders enable swimmers and divers to easily exit the water and climb back aboard. Features 304 stainless steel construction and triple-walled tubing, making these ladders some of the sturdiest available. when used with Small Backing Plates, Model 9545252, sold separately below. Material: Triple walled, stainless-steel tubing, multi-strand stainless steel wire supports for platform, 1" thick plastic stair and platform tread .
Part No: LP-5-16-H1
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Turbo Lube Hub Kits
Reduce wear and friction and increase tow vehicle mileage with one of these innovative systems. Oil bath lubrication system rotates individual roller bearings more than four times through oil with every wheel revolution to keep hub and bearings cooler. See-through, leak-proof threaded oil cap affords oil level view. Each kit includes bearings, threaded oil cap, cotter pin and lug nuts. Fits all wheels with a center hole of 2. 90" or larger.
Part No: 81043
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Turbo Lube Hub Kits
Reduce wear and friction and increase tow vehicle mileage with one of these innovative systems. Oil bath lubrication system rotates individual roller bearings more than four times through oil with every wheel revolution to keep hub and bearings cooler. See-through, leak-proof threaded oil cap affords oil level view. Each kit includes bearings, threaded oil cap, cotter pin and lug nuts. Fits all wheels with a center hole of 2. 90" or larger.
Part No: 81048
|
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Turbo Lube Hub Kits
Reduce wear and friction and increase tow vehicle mileage with one of these innovative systems. Oil bath lubrication system rotates individual roller bearings more than four times through oil with every wheel revolution to keep hub and bearings cooler. See-through, leak-proof threaded oil cap affords oil level view. Each kit includes bearings, threaded oil cap, cotter pin and lug nuts. Fits all wheels with a center hole of 2. 90" or larger.
Part No: 81023
|
|
|
|
Home -> Plumbing -> Marine Sanitation -> Treatment Sys/hldng Tnks->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S30-5
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S60-5
|
|
|
|
Home -> Safety -> Man Overboard Gear
This is the easiest and quickest way to get your crewmember back onboard without the use of a winch. Lifting tackle has a 5:1 purchase, since powerboats generally lack winches, and a triple block with downward facing cam cleat for securing the line. Large carabiner snaps allow attachment to Lifesling and vessel.
Part No: C-TACKLE 5:1
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->EnviroComfort Reverse-Cycle Self-Contained Air Conditioners
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
Part No: 207400301
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->EnviroCool Self-Contained Air Conditioners
capacities to accomodate boats in the 25–40 foot range. These systems use R-417A refrigerant, an environmentally safe, green gas. Outstanding features include high-velocity motors with no overhang for a compact footprint plus a stainless-steel drain pan and pre-installed return air filter that can be easily removed and cleaned. Systems come complete with a seawater pump plus all the pieces and parts you need (from seawater intake to supply air grille) for a professional installation. models.
Part No: 207444301
|
|
|
|
Home -> Safety -> First Aid & Medical -> First Aid Kits
Our most comprehensive marine medical kit is designed for coastal cruising and longer voyages on vessels carrying up to eight people. Packed with the exclusive Easy Care First Aid Module System, this kit has all the supplies you need for medium-to-large boats, including fishing or commercial boats, carrying 1-8 people. Contents meet or exceed Coast Guard regulations for small commercial passenger ships and fishing vessels and ISAF Offshore Special Regulation 4. 08 for Monohulls and Multi-Hulls.
Part No: 2062-0008
|
|
|
|
Home -> Plumbing -> Freshwater Systems->Sensor Max VSD Water Pumps
Versatile pumps feature variable speed control, solid state pressure sensor and nearly silent operation with no cycling. Controls pressure by changing motor speed and speeds up as demand increases. Self priming to 10' and able to run dry without damage. No accumulator tank needed. Operates on 12V or 24V DC. Switch Type: Pressure sensor controlled with no pressure switch . Self-Prime: 10' . Material: Glass-filled polypropylene . Port Sizes: 1/2" hose or 1/2" Qest thread .
Part No: 32755-0000
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-011
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Outdrive Gasket Sets
Gasket and O-ring kits that seal the drive to the transom.
Part No: 800-012
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-014
|
|
|
