Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings1500W (5200Btu), 900W (3120Btu) and energy saver 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
Manual Oil Change Pump from WEST MARINE
"We don’t know anyone who looks forward to changing engine oil, but this pump should make the job a little easier. The handle makes it easy to carry the goo to a harbor recycling location or your local gas station that accepts used oil. Your engine will appreciate it!" Improved durability and capable of inflating high-pressure This value-priced oil changer makes changing oil a snap! Simply place the transfer probe down the dipstick tube and start pumping.
|
Stainless Strap Hinge, 2 5/8 inch from WEST MARINE
Type 304 electro-polished. Gauge: 0. 060 stainless steel. Drilled and countersunk for #8 fasteners (not included). Sold in pairs. ShWt .
|
|
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
|
5, 5" ID, 8" from SEATEAK, 5' Length from WEST MARINE, 5" Garmin Mount, 5' 10-7
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,110
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,201
1,202
1,203
1,204
1,205
1,206
1,207
1,208
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-010
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-036
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3155.1.8M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.1.8M
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3156.1.8M
|
|
|
|
Home -> Boats & Motors -> Oars & Paddles->Aluminum Paddles
With a buoyant design that floats and comfortable T-handle grips, these paddles are great for all day paddling. Their reinforced construction features an anodized aluminum shaft that extends fully into the 8" wide, high-impact polyurethane blade. Material: Anodized aluminum and plastic . Blade Width x Length: 8" x 22" . Handle Style: T-grip .
Part No: 92011-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->KeelGuard Protection Strips
KeelGuard protects your boat’s or PWC’s keel from scrapes and scratches when beaching on sand, rocks and even concrete boat ramps. Comes with installation tools and 3M pressure-sensitive adhesive. Available in many different colors. 4'L–12'L are available through Special Order in Light Gray, Charcoal, Sand, Yellow, Red, Blue, Kelly Green, Teal, Lavender and Hunter Green. FREE Stainless-Steel Buster Bow Guard with the purchase of a Keelguard. Comes in the package with your order.
Part No: 20305
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->KeelGuard Protection Strips
KeelGuard protects your boat’s or PWC’s keel from scrapes and scratches when beaching on sand, rocks and even concrete boat ramps. Comes with installation tools and 3M pressure-sensitive adhesive. Available in many different colors. 4'L–12'L are available through Special Order in Light Gray, Charcoal, Sand, Yellow, Red, Blue, Kelly Green, Teal, Lavender and Hunter Green. FREE Stainless-Steel Buster Bow Guard with the purchase of a Keelguard. Comes in the package with your order.
Part No: 20205
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->KeelGuard Protection Strips
KeelGuard protects your boat’s or PWC’s keel from scrapes and scratches when beaching on sand, rocks and even concrete boat ramps. Comes with installation tools and 3M pressure-sensitive adhesive. Available in many different colors. 4'L–12'L are available through Special Order in Light Gray, Charcoal, Sand, Yellow, Red, Blue, Kelly Green, Teal, Lavender and Hunter Green. FREE Stainless-Steel Buster Bow Guard with the purchase of a Keelguard. Comes in the package with your order.
Part No: 20505
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->KeelGuard Protection Strips
KeelGuard protects your boat’s or PWC’s keel from scrapes and scratches when beaching on sand, rocks and even concrete boat ramps. Comes with installation tools and 3M pressure-sensitive adhesive. Available in many different colors. 4'L–12'L are available through Special Order in Light Gray, Charcoal, Sand, Yellow, Red, Blue, Kelly Green, Teal, Lavender and Hunter Green. FREE Stainless-Steel Buster Bow Guard with the purchase of a Keelguard. Comes in the package with your order.
Part No: 20105
|
|
|
|
Home -> Safety -> Man Overboard Gear->Lifeline Netting
Rugged nylon netting keeps kids, headsails, foredeck crew and pets aboard. Each net is 2'H .
Part No: 125
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60859
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60858
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60857
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60855
|
|
|
|
Home -> Paint & Maintenance -> Epoxy & Fiberglass->Teak Finish Trim Moldings
Assorted Teak Finish Trim Moldings.
Part No: 60860
|
|
|
|
Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Bungee Dock Lines
Shock-absorbing docklines with built-in snubber Airhead Bungee Dock Lines absorb shocks to boats, cleats, docks, pylons and other hardware. The bungee cord is hidden inside the line and acts as a built-in snubber. Two foam floats protect the boat from chafing, and there's a sliding adjustment at both ends for quick docking. Recommended for docking boats and PWCs up to 3,500lb. Tensile strength is 2150lb.
Part No: AHDL5
|
|
|
|
Home -> Sailboat -> Cleats & Stoppers->Nylon Cleats
Open base, glass-filled nylon cleats with two mounting holes. 3" cleat: 5/16 max line dia. , 9/16" Height, #8 FSTN. 4" cleat: 3/8 max line dia. , 3/4" Height, #8 FSTN. 5" cleat: 3/8 max line dia. , 1" Height, #10 FSTN. 6" cleat: 1/2 max line dia. , 1 1/4" Height, 1/4" FSTN. 8" cleat: 5/8 max line dia.
Part No: 81023
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Satellite TV/Phone Antenna Mounts
Designed for arches or cabin tops. Be sure these mounts are attached where other electronic signals will not conflict and they are level.
Part No: PMA-5-7A
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Satellite TV/Phone Antenna Mounts
Designed for arches or cabin tops. Be sure these mounts are attached where other electronic signals will not conflict and they are level.
Part No: PMA-5-M8
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Stainless Power Mounts with Light Bar Option
Stainless power mounts constructed of 316 stainless steel with 7" square mounting base. Light bar is optional. Power mount accessories sold separately.
Part No: PMA-5G-7LSS
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Stainless Power Mounts with Light Bar Option
Stainless power mounts constructed of 316 stainless steel with 7" square mounting base. Light bar is optional. Power mount accessories sold separately.
Part No: PMA-5R-7LSS
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Stainless Power Mounts with Light Bar Option
Stainless power mounts constructed of 316 stainless steel with 7" square mounting base. Light bar is optional. Power mount accessories sold separately.
Part No: PMA-5U-7LSS
|
|
|
|
Injection molded black nylon. 4" overall length. 7/8" high. 1-1/8" hole to hole. 2" base length.
Part No: 043050
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Power Mount Plus Radar Antenna Mounts with Light Bar Option
Light, strong and attractive mounts for your radar scanner Seaview's Power Mounts make it easy for you to raise your radar above shipboard obstructions. Stylish anodized and powder-coated aluminum oval-shaped struts are a great choice for mounting radars on arches or cabin tops. They offer 20° aft leaning profiles and all accept the optional Universal Light/GPS Mount, WM #6966006. When selecting a mount, be sure your radar brand matches the mount description as bolt patterns vary.
Part No: PMA-5G-7L
|
|
|
|
Home -> Electronics -> Radars -> Radar Accessories->Power Mount Plus Radar Antenna Mounts with Light Bar Option
Light, strong and attractive mounts for your radar scanner Seaview's Power Mounts make it easy for you to raise your radar above shipboard obstructions. Stylish anodized and powder-coated aluminum oval-shaped struts are a great choice for mounting radars on arches or cabin tops. They offer 20° aft leaning profiles and all accept the optional Universal Light/GPS Mount, WM #6966006. When selecting a mount, be sure your radar brand matches the mount description as bolt patterns vary.
Part No: PMF-5G-7L
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Carabiners & Snaphooks->Genius Carabiners
An ingenious innovation—the gate opens at an angle to accommodate ''fatter'' rings and large mooring lines.
Part No: 590-12
|
|
|
|
Home -> Electronics -> Autopilots -> Autopilot Accessories->Autopilot Mounting Accessories
Tiller Brackets Mounts the activating rod above or below the tiller, measured in vertical distance from the tiller. . Use 4" or 5" Heavy Duty Brackets for ST2000+/ST4000+/ST4000+GP . Push-Rod Extensions For tiller models. . Two can be screwed together if extra length is required. Pedestal Raises the height of mounting positions for tiller models. Unscrews from bare plate when not in use to allow clear working space. Includes bolts, washers, and locking plate. Aluminum.
Part No: D160
|
|
|
|
Home -> Plumbing -> Hose & Hose Clamps->Hi-Temp Silicone Hump Hose
Silicone hump hose has extremely high operating temperatures (up to 350°F) and much greater tolerance to engine movement, vibration, and misalignment than standard hump hose. Construction: 100% silicone rubber, multi-ply polyester reinforced . Temperature Range: –65°F to 350°F continuous . Installation: Use at least two stainless clamps, 1/2" wide minimum, at each end . Included Equipment: 316 stainless steel T-bolt clamps, 3/4" wide, 18-8 stainless lock nut .
Part No: 116-272-5000
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Exhaust Elbows
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
Part No: 116-245-5000KIT
|
|
|