Top Sellers
1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
|
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
|
|
Chrysler Outboard 1962-1984, 1-4 Cyl., 3.5-150 HP from SELOC PUBLICATIONS
SELOC Marine tune-up and repair manuals provide the most comprehensive, authoritative information available for outboard, inboard and stern-drive engines, as well as personal watercraft. Designed and written to serve the needs of the professional mechanic, do-it-yourself boat enthusiast, instructor and student, these manuals are based on actual teardowns done by Seloc’s editors/authors in our on-site facility. , 3. 5-150 HP from 1962-1984. Hundreds of exploded drawings, photographs and tables .
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Stainless Boat Hook Holders from PERKO
Polished stainless steel holders for poles to 1. 5" dia. 3. 5" L x 1" W. . . Sold in pairs.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
T-Ball Swage Fitting, 1/8" Wire Size from ALEXANDER-ROBERTS
Electropolished 316 stainless steel. Running Back style has a stainless bail rather than a swage end, to accept Dyneema or other rope for a running backstay. *Running Back style has a stainless bail rather than a swage end to accept Spectra or other rope for a running backstay. Style: Swage . Material: Electropolished Type 316 stainless steel . Configuration: T-ball swage .
|
Bullseye, 1-1/8" Nylon from RONSTAN
Great for minor direction changes in line. Also good for containing line hanging along booms. Nylon deadeyes are available with or without insert.
|
|
|
|
3, 3-1, 1, 8"H x 3-1, 3-5, 2" from CHARLES MARINE, 2"H x 2-3, 4"H x 2-3
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,120
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,209
1,210
1,211
1,212
1,213
1,214
1,215
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,240
1,250
1,260
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aquabloc® Replacement Elements for Turbine Series
For 200, 500, 900 and 1000 Series Fuel Filters/Water Separators Keep your diesel in top running order .
Part No: 2010SM-OR
|
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aquabloc® Replacement Elements for Turbine Series
For 200, 500, 900 and 1000 Series Fuel Filters/Water Separators Keep your diesel in top running order .
Part No: 2010PM-OR
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang -> T Track & Sail Track->Big Boat Traveler Cars & Accessories
Big Boat Captive Ball Traveler Cars are built to handle high loads on boats from 32 to 50 ft. , and up to 70ft. Machined aluminum Hardkote-anodized races permit Torlon® bearings to transition smoothly from the active to return race for smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is off the track. Pivoting shackle/toggle cars have low pivot points to handle non-vertical loads. Blocks attach directly to the toggle for a low-profile, compact system.
Part No: 3167
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety->5000 Series Dual-Cartridge Respirators
Oil proof and 95% efficientSold as Assembly only. Kit contains one Half-Facepiece, one pair of Organic Vapor (OV) Cartridges (not replaceable) and two pair of 5P71 (P95) Particulate Pre-Filters. Particulate filters can be replaced for extended product life. Should always be worn with filters in place. Please refer to the Respirator Parts and Filters chart for Particulate Pre-Filter replacements. Grinding, sanding, painting. Approvals: NIOSH 42 CFR 84 P95 (95% efficiency, oil proof) .
Part No: R53P71-CP
|
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety->5000 Series Dual-Cartridge Respirators
Oil proof and 95% efficientSold as Assembly only. Kit contains one Half-Facepiece, one pair of Organic Vapor (OV) Cartridges (not replaceable) and two pair of 5P71 (P95) Particulate Pre-Filters. Particulate filters can be replaced for extended product life. Should always be worn with filters in place. Please refer to the Respirator Parts and Filters chart for Particulate Pre-Filter replacements. Grinding, sanding, painting. Approvals: NIOSH 42 CFR 84 P95 (95% efficiency, oil proof) .
Part No: R52P71-CP
|
|
|
|
Chargers are ignition protected, so they're safe for engine room installation and they feature virtually no F/EMI interference, are AC/DC fuse protected and meet FCC Class B requirements. Allows selection of charging cycles and voltages for lead acid, AGM or gel batteries. These units also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Automatic Functions: Over-current, thermal & reverse-polarity protection, temperature compensation .
Part No: 93-12205SP-A
|
|
|
|
|
Chargers are ignition protected, so they're safe for engine room installation and they feature virtually no F/EMI interference, are AC/DC fuse protected and meet FCC Class B requirements. Allows selection of charging cycles and voltages for lead acid, AGM or gel batteries. These units also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Automatic Functions: Over-current, thermal & reverse-polarity protection, temperature compensation .
Part No: 93-24205SP-A
|
|
|
|
|
Chargers are ignition protected, so they're safe for engine room installation and they feature virtually no F/EMI interference, are AC/DC fuse protected and meet FCC Class B requirements. Allows selection of charging cycles and voltages for lead acid, AGM or gel batteries. These units also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Automatic Functions: Over-current, thermal & reverse-polarity protection, temperature compensation .
Part No: 93-12305SP-A
|
|
|
|
|
Chargers are ignition protected, so they're safe for engine room installation and they feature virtually no F/EMI interference, are AC/DC fuse protected and meet FCC Class B requirements. Allows selection of charging cycles and voltages for lead acid, AGM or gel batteries. These units also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Automatic Functions: Over-current, thermal & reverse-polarity protection, temperature compensation .
Part No: 93-24305SP-A
|
|
|
|
|
Chargers are ignition protected, so they're safe for engine room installation and they feature virtually no F/EMI interference, are AC/DC fuse protected and meet FCC Class B requirements. Allows selection of charging cycles and voltages for lead acid, AGM or gel batteries. These units also act as a power supply providing constant voltage to DC components such as bilge pumps or DC lighting. Automatic Functions: Over-current, thermal & reverse-polarity protection, temperature compensation .
Part No: 93-12405SP-A
|
|
|
|
Home -> Electronics -> Radars->Questus Self-Leveling Radar Antenna Mounts
The hydraulic pivot dampener prevents any oscillation in all sea conditions. The majority of backstay mountings require no modification to the boat or rigging and can be adapted to accommodate a split backstay. For backstay applications, choose a gimbal and a backstay tube. 18" radomes: Use Model 400G backstay gimbal, or 500G pole mount. 24" radomes: Use Model 100G backstay gimbal, or 300G pole mount. For backstay applications, choose a backstay gimbal and a backstay tube.
Part No: 102809-000
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Automatic 12V Bilge Pumps
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
Part No: 25S
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 25D
|
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Submersible Electric Bilge Pumps
Tough and reliable at a value price Great performance at a value price, Rule submersible pumps are the first choice for many boat manufacturers. Their motors feature stainless-steel shafts, water cooling and a vibration-free centrifugal impeller that won’t burn out if run dry. Strainer bases can easily be snapped off for cleaning. Each pump requires a panel switch for manual operation or a float switch for automatic operation. Select from 12V, 24V and 32V models. Can run dry without damage.
Part No: 26D
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Sahara Automatic Bilge Pumps
Engineered for extended service life, these pumps feature a cool-running design and quality components including permanent magnet motors, stainless steel shafts, and steel-reinforced seals. Type: Automatic centrifugal submersible . Features: Superior motor cooling. Test knob for operational check without disassembly. . Built-In Switch: Non-mercury mechanical float switch . Material: Glass-filled polyester impeller, 316 stainless shaft . 4"H x 3-1/4"W x 5-1/2" L.
Part No: 4505-7
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->SHURflo Bilge Pumps
Built for demanding marine use, pumps feature permanent magnet motors, ABS plastic (380–1000gph models) or nylon housings (1500 and 2000gph models) and high-strength nylon impellers. Motors are water cooled for extended life. 380–1000gph models include 3' tinned wire leads. 1500 and 2000gph models come with 6' leads. 1500 and 2000gph models install easily with included swivel base. Type: Submersible centrifugal bilge pump .
Part No: 355-010-10
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Cartridge Bilge Pumps
Pumps ship with a 90°, smooth elbow and one straight discharge port. Made of durable, yet resilient polypropylene, these ports install via a convenient one inch garden hose style fitting which eliminates stress cracks caused by overtightening. An added benefit is that the 90° elbow may be rotated to make hose connections easy in cramped mounting locations. Outlet port check valve included for optional use. Removable motor cartridge for easy cleaning. Type: Submersible cartridge bilge pump .
Part No: 32503
|
|
|
|
Home -> Plumbing -> Bilge Pumps -> Electric Bilge Pumps->Rule-Mate Fully Automatic Bilge Pumps
Strainer easily removes for cleaning The unique “spongeability” feature of these quiet and compact pumps removes excess water, leaving bilge dry and reducing odors. The pumps activate only when water levels rise to 2-1/8". Enclosed non-mercury float switch. Clear debris quickly with the removable strainer and easy-access impeller area. Built-In Switch: Non-mercury float switch . Material: Plastic/stainless shaft.
Part No: RM500-24
|
|
|
|
Home -> Plumbing -> Bilge Pumps->Tsunami Bilge Pumps
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
Part No: 4606-7
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->CQR™ Anchors
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Part No: 0056550
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Hinged Plow Anchors->Plow Anchors
Hinged plow anchor holds in sand, weeds and mud This powerful plow is Lloyd’s certified as a high-holding power anchor. Forged and available in hot-dipped galvanized steel or 316 polished stainless steel. Pros: High holding (Lloyd’s certified) for larger yachts to megayachts and ships. Hinged shank and weighted tip deliver maximum holding power Cons: Expensive due to their size, quality materials and construction Style: Hinged plow . Material: Hot-dipped galvanized or 316 stainless steel .
Part No: SSP500
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Hydraulic Steering->Relief Valves
Intended to protect the system’s components and assist in purging air.
Part No: MSV-19
|
|
|
|
Home -> Electrical -> Shore Power->50A Receptacles & Plugs
The 50A shorepower systems are offered in 125V 3-conductor, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure to order matching components, as they are not interchangeable. Non-Metallic Power Inlet is watertight with either white polyester (wp) with marine stainless trim or 316 cast stainless steel (ss). Dockside receptacle accepts 50A, 2-pole or 3-pole plugs. Female connectors offer superior strain relief and all nylon construction.
Part No: 6370CR
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
Box is yellow fiberglass. Two 3/4" knock-out holes. . Accepts all 30A, 125V; 50A, 125V and 50A 125/250V receptacles. Accepts 7420CR and 7788CR weatherproof covers.
Part No: 6083CR
|
|
|
|
Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Panel-Mount Circuit Breakers
Overload protection for your windlass and your boat’s electrical system. Also function as main power switches.
Part No: SPA-10050W
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets->Right Angle Cordset Adapters
When space is tight, convert your existing shore power cordset from a straight connection to a right angle connection. GripLock™ handle design for easy hook-up and correct blade alignment, even in the dark. Includes sealing collar to lock out moisture between adapter and cordset.
Part No: 1RPC50
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
With a single 50-amp 125/250-volt power cable, you can draw 30 amps, 250 volts from two 30-amp/125-volt shore power receptacles safely and intelligently. Will function only if the polarity at the power pedestal (that is; hot and neutral) are not reversed, and inputs are of opposite phase. Since the power is derived from two shore power receptacles, the maximum allowable current (without tripping circuit breakers) is 30 amps at the boat inlet.
Part No: 93-SMTY50-A
|
|
|
|
Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition.
Part No: 7242
|
|
|
|
Home -> Electrical -> Shore Power -> Adapters, Plugs & Outlets
The 50A shorepower systems are offered in 125V, 3-conductor pole, 2-pole models and 125V/250V, 4-conductor, 3-pole models. Make sure you order matching components, as they are not interchangeable (except covers). Yellow Lexan® with waterproof lid. Fits receptacles # 379404, 125/250V and # 410456, 125V.
Part No: 7788CR
|
|
|
|
Home -> Paint & Maintenance -> Zinc Anodes
50mm Shaft Anode.
Part No: CMX50
|
|
|
