Top Sellers
Quicksilver Gear Lube Pump from MERCURY MARINE
Fits all models except Mercury Mariner 2. 2, 4 and 5; Mariner 2, 4, 5, 15, 30, 40 (Japanese origin).
|
A - Atlantis Clock - Tide & Time from WEEMS AND PLATH
Hand-polished, fogged brass cases with precision quartz movement. The highly reliable, temperature compensated, aneroid barometer reads in inches and millibars. Barometer movements are calibrated for altitudes to 3500' above sea level. The combination quartz clock and tide clock movement averages the lunar tide cycle. S. Solid cast brass case with protective lacquer coating Screw-type bezel allows easy access Clock features a German movement with bell silencer Dial: 4" Base: 5 1/2".
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
5"-6" Bonnet Set from WMH TOOL GROUP
For final buff out, use the wool polishing bonnet included in this Seven Piece Bonnet Set which includes four applicators, two terry cloth, one wool and one microfiber polishing bonnet.
|
SmartPilot X-5 Wheel Pilot from RAYMARINE INC.
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
|
Five Louver Stainless Steel Vent from WHITECAP INDUSTRIES
Mount on doors, bulkheads, in the cockpit and on hatch boards. Helps to eliminate mildew. . Pre-drilled for six #8 screws. . Mfr. 's lifetime limited warranty. . Ship 0. 5 lbs.
|
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
|
Rubrail Insert - for Style #6, Model 341100 from TACO PRODUCTS
Rubber inserts add cushioning to your aluminum rubrails. . These fit styles #5, #6 and #7. Rub rails and inserts sold separately. .
|
Fuel Hose, Type B-2 5/16" from MOELLER
We offer 5/16" and 3/8" SCG B-2 alcohol-resistant hose as used in pre-assembled fuel line. Sold by the foot.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
|
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.
|
|
6, 5" x 6, 5, 5" x 5" x 2, 36" x 6, 34mm x 6, 5" x 2, 6' 10", 6-Step, 5" x 4, 5"H x 5, x 2
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,216
1,217
1,218
1,219
1,220
1,221
1,222
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,250
1,260
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->Water-Resistant DC Circuit Breaker Panels
Voltage: 12/24V DC . Amperage Rating: 20A@12V DC; 15A@24V DC . Breaker/Switch Type: Push button breakers with waterproof boots, Contura switches . Lighting: Embedded "On" LED in switch . Draw: LED 18mA each . Panel Material: 1/8" 5052 alloy . Waterproof: Rated IP66 "Use on Shipdecks" Labels: Set of 60 common labels included .
Part No: 8373
|
|
|
|
Home -> Electrical -> Meters & Distribution -> Distribution Panels->Water-Resistant DC Fuse Panels
Fuse panels have sealed Contura switches Water-resistant panels withstand rain, sea spray and hose spray washdown, and are designed for flybridge and open cockpit applications. Fuse holders are improved and easy to open. Voltage: 12/24V DC . Fuse/Switch Type: AGC and MDL 1-1/4" x 1/4" glass fuses; Contura switches . Waterproof: Rated IP66 “Use on Shipdecks” . Lighting: Embedded LED "ON" lights . Labels: Set of 60 common labels included . Approvals: USCG, ABYC .
Part No: 8053
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Gunwale-Mount Ladders
Handrails rise 5" above-deck to provide secure handholds. Allows you to “walk through” to the deck. The cushioned standoffs can be cut to fit hull contours. Bottom steps fold up for compact storage. Additional mounting brackets are available for multiple mounting locations. Mounting Style: Deck bracket mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Width: 13. 75"W (outside dimension) .
Part No: WML-3-3-12-DFRM
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks -> Ladders & Ramps->Removable Transom Ladders
These unique ladders can be left in place when underway, or removed quickly for storage. Standoffs can be cut to fit transoms at conventional or reverse angles. Each ladder includes one pair of mounting sockets. 13. 75"W. Mounting Style: Removable transom-mount . Material: 304 stainless steel . Maximum Capacity: 300lb. . Mounting Hardware: Pair of mounting sockets included . Fastener Size Required: Eight 1/4" RHMS (sold separately) .
Part No: WM-L-3-3-12-D-F
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Ladder Platforms
With an underwater platform at the bottom, these innovative ladders enable swimmers and divers to easily exit the water and climb back aboard. Features 304 stainless steel construction and triple-walled tubing, making these ladders some of the sturdiest available. when used with Small Backing Plates, Model 9545252, sold separately below. Material: Triple walled, stainless-steel tubing, multi-strand stainless steel wire supports for platform, 1" thick plastic stair and platform tread .
Part No: LP-6-16-H1
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S30-6
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S60-6
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling -> Air Conditioning->EnviroComfort Reverse-Cycle Self-Contained Air Conditioners
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
Part No: 207400304
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->EnviroCool Self-Contained Air Conditioners
capacities to accomodate boats in the 25–40 foot range. These systems use R-417A refrigerant, an environmentally safe, green gas. Outstanding features include high-velocity motors with no overhang for a compact footprint plus a stainless-steel drain pan and pre-installed return air filter that can be easily removed and cleaned. Systems come complete with a seawater pump plus all the pieces and parts you need (from seawater intake to supply air grille) for a professional installation. models.
Part No: 207444304
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks->Hoister Four-Point Lift System
Is your garage so packed full of stuff that there’s no room for the car? The Harken Hoister stores car-top recreational craft like kayaks, dinghies—even truck caps—up and out of the way. A self-locking, ball bearing block system prevents accidental release, even if you drop the line, so you can hoist or lower large items onto your car by yourself. There’s also one for a bike (Model 2043008). 8.
Part No: 7803
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Slow-Blow MDL Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 602062
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Yanmar Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. The mounts are shear loaded to provide stiff resistance fore and aft to absorb forward and reverse propeller thrust. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement. Yanmar diesel mounts fit the following engines: 800-010Y fits: 3JH. 800-011Y fits: 4JH.
Part No: 800-037Y
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Yanmar Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. The mounts are shear loaded to provide stiff resistance fore and aft to absorb forward and reverse propeller thrust. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement. Yanmar diesel mounts fit the following engines: 800-010Y fits: 3JH. 800-011Y fits: 4JH.
Part No: 800-010Y
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Yanmar Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. The mounts are shear loaded to provide stiff resistance fore and aft to absorb forward and reverse propeller thrust. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement. Yanmar diesel mounts fit the following engines: 800-010Y fits: 3JH. 800-011Y fits: 4JH.
Part No: 800-011Y
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->High-Profile Dock Cleats
High-profile design makes it easier to loop lines under these cleats with a boat hook. Large ball ends help prevent injury to feet, and large base pad is predrilled with four mounting holes for secure installation.
Part No: 2506W
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->6.5" 2-Way Marine Speakers
Add powerful sound to your Kenwood stereo system with a pair of these marinized coaxial speakersThey handle up to 120 peak watts of sound power, with 6 1/2" waterproof polypropylene woofer cones surrounded with a rubber seal and a built-in PEI-balanced dome tweeter. Both are UV-resistant in grille and frame with integrated cross-over. Fully waterproof and compatible with all Kenwood stereo systems. Style: Flush mount 2-way crossover speakers . Watts: 120W peak power . Waterproof: Yes .
Part No: KFC-1652MRW
|
|
|
|
Home -> Paint & Maintenance -> Tools
Manufactured to ANSI standards, pliers are drop forged chrome-vanadium steel with comfortable, two-material rubber handles and precision, machined teeth.
Part No: 15210
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios->Marine Speakers & Subwoofers
Made of mica-polypropylene, these marine speakers are built for added protection against the elements associated with boating. Subwoofers are available in 8” and 10” sizes and are designed to withstand vibration, temperture changes as well as exposure to moisture and salt air. Each handles up to 400W of peak power for thick, powerful bass Style: Flush mount . Impedance: 4 ohms . Cone: Mica-polypropylene woofer with santoprene surround; 1" titanium PEI tweeter . Magnetic Shielding: Yes .
Part No: CMQ1620R
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios -> Speakers->Two-Way Flush-Mount Speakers
Superior quality waterproof marine speakers at a great price! We’ve worked with a manufacturer who can meet all of our tough specifications for marine stereo speakers to design superior quality, long-lasting waterproof marine speakers at an attractive price! Waterproof, round two-way speakers feature corrosion-proof high-impact plastic grilles and all stainless and brass hardware. Watts: 120/pair . Impedance: 4 ohms . Waterproof: Exterior waterproof . Material: Aluminum grille, plastic case .
Part No: WM-6500B
|
|
|
|
|
Home -> Electronics -> Video, Stereos, Weather Radios -> Speakers->Two-Way Flush-Mount Speakers
Superior quality waterproof marine speakers at a great price! We’ve worked with a manufacturer who can meet all of our tough specifications for marine stereo speakers to design superior quality, long-lasting waterproof marine speakers at an attractive price! Waterproof, round two-way speakers feature corrosion-proof high-impact plastic grilles and all stainless and brass hardware. Watts: 120/pair . Impedance: 4 ohms . Waterproof: Exterior waterproof . Material: Aluminum grille, plastic case .
Part No: WM-6500W
|
|
|
|
Home -> Paint & Maintenance -> Tools -> Hand Tools
Manufactured to ANSI standards, pliers are drop forged chrome-vanadium steel with comfortable, two-material rubber handles and precision, machined teeth.
Part No: 15106
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-021
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->R&D Marine Engine Mounts
R&D Engine Mounts are designed to withstand the rigors of marine applications. In addition, they are soft vertically and laterally to isolate drive train vibrations from the hull. To help increase the longevity of the mounts, all steel parts are passivated and zinc plated to limit corrosion. The rubber element is covered by an oil shield to protect it from petroleum based products. R&D mounts are preloaded based on the combined engine and transmission weight to limit engine movement.
Part No: 800-030
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manta™ Anchors
One-piece anchors for maximum strength and holding power Constructed of high-grade steel cast in a single piece for superior strength, this anchor delivers exceptional holding power in most seabeds and remains stable under varying tide and wind conditions. Sets and resets quickly and roll stabilization prevents breakout caused by veering. Stows easily on a bow roller. Hot dipped galvanized steel. Cons: Not as high holding power compared to other large-boat anchors. Style: Bruce-style claw .
Part No: 301050111
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Solar Panels->Folding Solar Panels
Uses include connection to NiCad or NiMH battery chargers to keep small AA, AAA or D-size batteries topped off as well as connection to your car or boat’s battery to make sure it is always ready to start your engine. The durable nylon thin film design works under cloudy or rainy skies. Includes battery clamps, 12V female outlet, cigarette lighter adapter, barrel plug connector and 8ft. power lead. Panel Material: High efficiency, thin film CIGS (copper indium gallium diselenide) solar cells.
Part No: 22005
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3154.2.1M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3155.2.1M
|
|
|
|
|
Home -> Sailboat -> Traveler, Tracks & Vang->Big Boat Track & Accessories
Harken’s Big Boat Traveler Track is available in low-beam and high-beam configurations.
Part No: 3156.2.1M
|
|
|
|
Home -> Fishing -> Rods->IGFA International® V Rods
Models 5080B and 5130B feature the Bent Butt, which lowers the reel for greater angler comfort, lengthening the fulcrum lever to your advantage. Penn IGFA Rods feature a parabolic taper, ideal for fighting fish from the chair, applying maximum pressure to the fish with a mechanical advantage in favor of the angler. While these rods are noticed at the dock for their visual appeal, you'll favor these rods on the water for their fish-fighting capabilities. Blank: P450 Super glass, hand wrapped .
Part No: 5070
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
For I/Os, inboards and outboards. Fit most engines, including Mariner (40 hp and below), Yamaha, Volvo, Suzuki, Tohatsu, Honda, Nissan and Chrysler/Force. Just measure tip-to-tip for length. Sold individually. 10-32 UNF threads. 6'' bend radius, 3'' travel.
Part No: CC17206
|
|
|
