Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
|
|
|
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
|
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Portable Cabin Heater from WEST MARINE
Melt away the morning chill! This ultra-quiet heater is perfect for boats, homes and offices. Versatility and simplicity with three heat settings—1500W (5200Btu), 900W (3120Btu) and “energy saver” 600W (2080Btu), which draws just 5A. Adjustable thermostat control keeps you comfortable. Antifreeze setting automatically turns on when temperature drops to 38°F. Overheat protector will not clog with dust or dirt. Draw: 5A–13A. Warranty: Three years.
|
|
1, 1-1, from SEADOG, 2nd from LEWMAR, 4" from GUEST, from WEST MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,130
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,223
1,224
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,260
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 6400 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX64007
|
|
|
|
|
Home -> Engine Systems -> Control Systems -> Control Cables->TFXtreme 6400 BC Performance Cables
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
Part No: CCX64008
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Provides corrosion and rust-resistance on steel or aluminum. A corrosion-inhibiting pigment keeps the metal surface in good condition and enhances adhesion to metal of primers and topcoats applied over it. Not recommended for wood or fiberglass. Drying, Overcoat: 2-24 hours Thinner: Denatured alcohol Coverage: 400-600 sq. ft. /gal.
Part No: 6455/044Q
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49065000
|
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- & Two-Speed Self-Tailing Winches
Advanced technology and innovative features has made Ocean Series the world’s most popular winches. Racing sailors appreciate the smooth operation and flawless performance. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy—easier still with a self-tailing model, which incorporates Lewmar’s Wavespring feature, a combination of the gentle Wavegrip and self-adjusting springs to handle today’s smaller diameter ropes.
Part No: 49065001
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 2610
|
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 2604
|
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 2606
|
|
|
|
|
Home -> Electrical -> Meters & Distribution->Rib Insulator Independent Connectors
Closed back design insulates power from mounting surface. Ribs provide partial insulation to each circuit. Each screw pair is one isolated circuit.
Part No: 2608
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Anti-Glare Pole Light
High-quality anti-glare pole light features articulating head allowing for 15 degrees of movement, decorative stainless-steel cap, for use on boats up to 65. 6 ft. Built-in articulating head; stainless steel cap for use on boats up to 65. 6 ft.
Part No: 22660-7
|
|
|
|
Home -> Trailer & Parts -> Trailer Parts & Carriers->Car Rack Crossbars
Crossbars attach to towers and provide stability to your rack system. They also support the sport-specific racks that carry your gear.
Part No: 8000410
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Docks And Accessories->Aquatic Weed Cutter
Like an underwater lawn mower, this environmentally safe tool cuts weeds at their source without killing. Construction features a 28" double-edged, braced and serrated steel cutting blade encased in an aluminum frame—so you don’t have to worry about the blade bending under a heavy load of weeds. The eleven foot, two-piece, rust-proof, powder-coated aluminum handle features a pushpin splice for easy assembly and dis-assembly.
Part No: 87003
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D300
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: SSD300
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Primers, Undercoats & Non-Skid
Ties topcoat to undercoat, regardless of compatibilityGeneral purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different types of coatings. Can be used above or below the waterline. Compatible with all antifouling and topside paints. Semi-flat burnt orange color. Brush, roll or spray. Quart kit. Primary Usage: Metal surfaces, underwater running gear, trim tabs . Formulation: General-purpose chlorinated rubber primer . Drying Time: Second coat: 2 hrs.
Part No: 6627-QT
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: RAY30
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manta™ Anchors
One-piece anchors for maximum strength and holding power Constructed of high-grade steel cast in a single piece for superior strength, this anchor delivers exceptional holding power in most seabeds and remains stable under varying tide and wind conditions. Sets and resets quickly and roll stabilization prevents breakout caused by veering. Stows easily on a bow roller. Hot dipped galvanized steel. Cons: Not as high holding power compared to other large-boat anchors. Style: Bruce-style claw .
Part No: 301050115
|
|
|
|
|
Home -> Anchor & Docking -> Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY30
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Zippered Storage Boots for Bimini BoaTops
Keep your Bimini BoaTop® neatly stored when you are not on the boat. Boots feature one separating zipper for easy on/easy off, and are made of marine vinyl to last for years.
Part No: 63170
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-125
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Portable Battery Chargers
Most of the portable chargers we’ve tested have been poorly regulated, not automatic, and potentially damaging to quality batteries. Lightweight aluminum and plastic cases allow cable storage in the back. 6A charger has automatic temperature compensation and is set for flooded batteries. 15A and 30A models feature manual temperature compensation and an LED readout that clearly shows the charge parameters you’ve chosen, and monitors charge voltage and current while charging.
Part No: CHG-2
|
|
|
|
Home -> Electrical -> Chargers & Inverters->Charge Pro Weather-Resistant Battery Chargers
Components are sealed in a corrosion-proof thermal epoxy Guest fixed-mount on-board chargers fit applications ranging from weekend boating to high-stakes tournament fishing. These light-weight, rugged, fully potted units are water resistant, shockproof, vibration proof, and impervious to rust, corrosion and caustic gases. Three-stage chargers extend the life of your battery by keeping it fresh and ready to go. Status Indicators: State of charge LED indicators . Input Wiring: 6 AC power cord .
Part No: 2608A
|
|
|
|
Home -> Electronics -> Fishfinders -> Transducers and Accessories->Assorted Power and Data Cables
A variety of cables for Garmin products.
Part No: 010-10550-00
|
|
|
|
Home -> Paint & Maintenance -> Sandpaper->Hookit Regalite Sand Discs
Use for stripping paint to metal, shaping and sanding plastic filler.
Part No: 00612
|
|
|
|
Home -> Engine Systems -> Engine Parts->Marine Rubber Hump Hoses
These rubber hump hoses absorb more engine movement, vibration and misalignment than standard exhaust hose. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end), downstream from cooling water injection.
Part No: 116-220-6000KIT
|
|
|
|
Hayward Fishing trolling weights can be used with all makes of down-riggers.
Part No: HDRRC-06
|
|
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295180
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Performance2 Anchors
We believe we actually improved on several aspects of the original designs of Bob Ogg and Richard Danforth. Our compact crown assembly provides low penetration-resistance and keeps the fluke angle at a precise 32° with a rugged, die-stamped crown and shank engagement. The characteristics we did not change include the ''T'' section flukes for symmetry and strength, high-strength 4130 steel flukes, shank and crown and quality galvanizing without flakes or sharp spikes of zinc.
Part No: 94065
|
|
|
|
Home -> Electronics -> Boat Instruments->NMEA 2000 Cables & Accessories
NMEA 2000 Cables & Accessories.
Part No: 010-11076-01
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyebolts & U Bolts->Eye Bolts
Machined from 304 stainless steel.
Part No: 080463
|
|
|
