Top Sellers
57mm Black Magic AirBlock, High-Load Strap Head with Becket, 2,500lb. SWL, 3.6oz. from HARKEN
Strong, lightweight aluminum blocks for offshore boats Used for sheets, halyards, running backstays and control lines on offshore boats, these strong, lightweight blocks are made of sculpted aluminum with Torlon rollers and carbon black balls for strength and UV protection. Cheek Material/Finish: 6160-T6 Hardkote anodized aluminum . Sheave Size: 57mm (2-1/4") . Construction: Three fasteners for quick disassembly. Plastic isolators separate dissimilar metals. Three-way head system.
|
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
|
|
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
|
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.
|
|
7, from SCHAEFER, Aluminum Cheeks from SCHAEFER
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,140
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,225
1,226
1,227
1,228
1,229
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,260
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->V-100 Vectran Double Braid, Color-Coded
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2801-06-00300
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->V-100 Vectran Double Braid, White
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2800-06-00600
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->V-100 Vectran Double Braid, Solid Colors
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2824-06-00600
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->V-100 Vectran Double Braid, Solid Colors
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2823-06-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->V-100 Vectran Double Braid, Solid Colors
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2822-06-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->V-100 Vectran Double Braid, Solid Colors
The Vectran core gives this line high strength with virtually no creep, and the polyester cover ensures excellent durability. Excellent resistance to fatigue caused by flexing. Works flawlessly around tight-radiused sheaves even under extreme loads. Surpasses even T-900 for extremely strong, low stretch, durable line. Cover Fiber/Construction: Braided polyester. Core Fiber/Construction: 12-strand Vectran. Stretch: 0.
Part No: 2821-06-00600
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2843-06-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2842-06-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2841-06-00600
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49007030
|
|
|
|
|
Home -> Sailboat -> Winches->Ocean Series One- and Two-Speed Winches, Non-Self-Tailing
Racing sailors will appreciate the smooth operation and flawless performance developed through years of experience on the race course. A massive, all-bronze one-piece center stem supports stainless steel main shafts and gear spindles that lend exceptional strength. Bronze gear trains deliver smooth power; high-tensile bronze gears are machine cut to very high tolerances. Fewer moving parts means fewer problems and simpler maintenance. And Ocean’s unique grip pattern makes rope handling easy.
Part No: 49007032
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard AGC Fuses
Fast-acting, corrosion-resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 601070
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->GMA Marine Fuses
Fast-acting, corrosion resistant fuses open quickly to protect circuits from overloads and shortcircuits Time-delayed to allow temporary, harmless in-rush currents to pass but open on sustained overloads and short-circuits Each fuse tested twice to ensure highest quality Available in sizes to fit every need.
Part No: 605070
|
|
|
|
This convenience light weight bucket can be used to hold a wide variety of items.
Part No: TTG7
|
|
|
|
|
This convenience light weight bucket can be used to hold a wide variety of items.
Part No: TTP7
|
|
|
|
|
This convenience light weight bucket can be used to hold a wide variety of items.
Part No: TTY7
|
|
|
|
Made of polycarbonate, this clear drinkware may last you a lifetime. Manufactured to a brilliant finish, it has the look and weight of crystal, but it won't crack or craze like acrylic can. Strahl is specially treated to withstand repeated dishwasher cleaning and is microwave-safe. Its thermal qualities keep your hot drink hot, yet allow you to hold the glass without burning your hands. Champagne and wine glasses have screw off bases for easy storage! Sold individually. Mfr.
Part No: 10000
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->Bleached Shop Towels
They're bleached white, so there's is no color to runWhen used with solvents, these multipurpose shop towels won't run and stain like ordinary red rags. Hundreds of uses. Towels measure 14" x 14" .
Part No: 62023
|
|
|
|
Home -> Engine Systems -> Engine Parts
Includes 13/16" and 5/8" spark plug sockets, 3/8 x 6" extension bar, universal joint, spark plug gauge, 3/8" ratcheting driver and wire brush.
Part No: 89093
|
|
|
|
Home -> Sailboat -> Blocks -> Blocks
The 7 Series ball bearing block offers a Delrin ball bearing sheave. Large sheave diameter and high working loads make 7 series blocks suitable for sheet and control blocks on medium to large offshore boats. Highly polished stainless steel, or tough, hardcoat anodized aluminum cheeks are reinforced with large, stainless V-straps and head posts. Beckets are removable . Sheave diameter: 2-3/8" (60mm) . Maximum Line Diameter: 9/16" . Ball Bearing: Delrin, contour bearing.
Part No: 706-05
|
|
|
|
Home -> Sailboat -> Blocks->5 & 7 Series Snap Shackle Adapters
Universal adapter for custom mounting all Series 5 and 7 blocks. Quick release.
Part No: 704-01
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Block-S7 Cheek Double SS|Block-S7 Cheek Double SS.
Part No: 705-28
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 704-11
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-11
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-35
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Universal head allows one block to function as a front shackle, side shackle, or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4" fasteners. Each ShWt 1, except fiddles.
Part No: 704-25
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Universal head allows one block to function as a front shackle, side shackle, or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4" fasteners. Each ShWt 1, except fiddles.
Part No: 705-25
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
Universal head allows one block to function as a front shackle, side shackle or swivel shackle block. Large sheave diameter and high working loads make them suitable for sheet and control blocks on medium to large offshore boats. Beckets are removable. 704 series are aluminum; 705 blocks are stainless. Where applicable, blocks use 1/4” fasteners. Sheave: Black or white Delrin® Bearings: Plain bearings Sheave Size: 2-3/8" (60mm) Line Dia: 1/2" max.
Part No: 704-55
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 704-75
|
|
|
|
|
Home -> Sailboat -> Blocks->7 Series Universal Head Blocks
.
Part No: 705-75
|
|
|
