Top Sellers
Deck Fill, Gas, w/Key, 1-1/2" from WHITECAP INDUSTRIES
Stainless-steel deck fills with durable cast heads—not the thin stamped heads found on many imports. Gas, Diesel and Water fills have 1 1/2" openings. Waste fill has 2" opening. All connect to 1 1/2" hose, and include a stainless key. Material: Stainless . Attachment Method: 1 1/2" hose . Flange Diameter: 3" or 3 1/2" (waste) . Fasteners: Three #10 FHMS . Cutout Diameter: 1 5/8" .
|
Boater's Pocket Reference from ROBERT HALE
Thomas McEwen. A pocket-sized alternative to Chapman, jam-packed with information boaters need to know! Includes a wealth of how-to info, plus reference facts, figures, formulas, graphs and tables about boating. Paperback . 3 1/4"W x 5 3/8"H x 15/16"D. . 766pp.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Push-Lock Slam Latch with Finger Pull from SOUTHCO
For glove box and small door applications where security is needed. Built to withstand harsh marine conditions, this latch is constructed of durable hybrid polymer and stainless steel. Mounts easily in a 1" cutout. Maximum working load: 120 lbs.
|
|
|
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
12V Macerator Pump, 14A Draw from SHURFLO
Designed specifically for the marine environment with run dry premium impeller technology. 5" male thread to screw directly onto a tank flange. Type: Macerating flexible impeller gpm: 13 Macerates: Yes Self-Prime: 5' Material: Nylon body, nitrile impeller, stainless wear plate Port Sizes: Inlet: 1-1/2" barb and 1-1/2" NPT male; Outlet: 1" hose barb Dimensions: 3-3/8"H x 4-5/8"W x 11"L Innovative blade design ensures problem-free pumping Inlet port has both a 1.
|
Small Recessed Transom Shower from SHURFLO
Ideal for mounting to any horizontal surface. Kit includes spray nozzle, hose and necessary hardware for easy installation. White. Material: ABS plastic . Dimensions: 3-7/8"H x 3"W x 2-7/8"L . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Alcohol/Electric Stove - 2-Burner from ORIGO
Safety and convenience at the dock or underway. These flush mount stoves allow you to cook with shore power when dockside or alcohol when underway. They feature electronic touch pads to control electric cooking elements. The stovetop easily flips up to allow access to remove the fuel canisters for simple filling. Fuel/Power: Alcohol/Electric Safety Features: Closed lid keeps On/Off Switch set to off. Configuration: Double Burner Cooktop Overall Dimensions: 14 7/8'' W x 6 3/8''D x 24 1/2''L .
|
Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .
|
Anchor Safety Strap from LEWMAR
18" long stainless steel; PVC coated with 4" bolt, nut and snap link Fits 1/4", 5/16" and 3/8" chain.
|
Plastic Coaming Box W/Fiddle from SAIL SYSTEMS
Strong, UV-resistant ABS. Flanges are pre-drilled for #8 FHMS. Cut-out template included.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Replacement Pressure Switch from GROCO
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
|
|
8", 8-1, 8" Cutout, 8" Flange, 8-3, 8" Max, 8" OneTouch, 8" x 1-7, 2-1
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
|
|
|
Home -> Sailboat -> Winches -> Winch Handles & Holders->OneTouch Winch Handles
Squeeze-and-insert winch handle for quick one-handed operation Save valuable time in heated mark-roundings or tacking duals with this innovative winch handle. Its patented "OneTouch" lock-in mechanism offers fast, one-handed winch exit and entry, so you spend less time fiddling with a sticky locking lever and more time sailing. Just squeeze the release button (which runs the entire length of the handle) and pull to unlock in one quick, easy motion.
Part No: 29140040
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Aluminum Closed Base Cleat
Plain Aluminum. Overall length 3". Base dimensions 1-1/2" by 5/8". Max rope size 1/4".
Part No: 0545DP8ALU
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6206WM
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Piling Caps
Made from heavy duty polypropylene, these piling caps will discourage birds from sitting on top of your pilings.
Part No: 6201WM
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Flip Up Dock Cleats
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
Part No: 2608P-F
|
|
|
|
Home -> Fishing -> Fishing Accessories->Power Pliers and Sheath
NEW! Berkley® TEC™ Power Pliers are forged from treated 420 stainless steel, with oversized components for enhanced strength. Each plier comes with a fitted sheath and pivoting belt clip for lightning quick access. All TEC™ tools handles feature Softorx™ finishes for maximum comfort, a secure grip, added leverage, increased dexterity, maximized torque, and non-slip control. Try that with any other plier. Forged from treated 420 stainless steel, with oversized components for enhanced strength.
Part No: 1131046
|
|
|
|
Home -> Trailer & Parts -> Hitches, Winches & Jacks->Manual Trailer Winch Replacement Handles
Manual Trailer Winch Replacement Handles.
Part No: 6302P01
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->Pry-Out ABS Deck Plates
Designed with an extra-heavy O-ring for a watertight fit, these pry-out plates have nonskid surfaces for horizontal installations and smooth surfaces for vertical installations. The diamond pattern deck plates have a nonskid surface that extends across the center, eliminating the edge ring that traps dirt and debris. The clear center plate permits observation of controls or gauges without the need to remove the plate. Clear plate models include white flange rings. Material: ABS plastic .
Part No: DP81-W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->Pry-Out ABS Deck Plates
Designed with an extra-heavy O-ring for a watertight fit, these pry-out plates have nonskid surfaces for horizontal installations and smooth surfaces for vertical installations. The diamond pattern deck plates have a nonskid surface that extends across the center, eliminating the edge ring that traps dirt and debris. The clear center plate permits observation of controls or gauges without the need to remove the plate. Clear plate models include white flange rings. Material: ABS plastic .
Part No: DP81-W-C
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->Screw-In ABS Deck Plates
A rubber O-ring on these ABS plastic deck plates creates a watertight seal for safety. Screw-in style has a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread. Use only 100% silicone caulk. One year warranty. Material: ABS plastic . Fasteners: #8 pan head screw or thru-bolts .
Part No: DP80-B
|
|
|
|
|
Clear and white ABS deck plates are sealed with a rubber O-ring for maximum watertightness and safety. Designed to be removable without the need for special tools, they feature a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread. A patented back-up sealing wall maintains the plate’s waterproof integrity even if the O-ring is lost or damaged. Available with smooth or dimpled non-skid plates. Clear plate models come with white or black flange rings.
Part No: DP80-B-C
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->Screw-In ABS Deck Plates
A rubber O-ring on these ABS plastic deck plates creates a watertight seal for safety. Screw-in style has a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread. Use only 100% silicone caulk. One year warranty. Material: ABS plastic . Fasteners: #8 pan head screw or thru-bolts .
Part No: DP80-W
|
|
|
|
|
Home -> Cabinet & Deck Hardware -> Deck Plates & Storage->Screw-In ABS Deck Plates
A rubber O-ring on these ABS plastic deck plates creates a watertight seal for safety. Screw-in style has a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread. Use only 100% silicone caulk. One year warranty. Material: ABS plastic . Fasteners: #8 pan head screw or thru-bolts .
Part No: DP80-W-C
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->316 Stainless-Steel Flush-Mount Cleats
316 Stainless-Steel Flush-Mount Cleats.
Part No: F16-3052-1
|
|
![8" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 5/16" FHMS, 1-5/16"H from SCHAEFER]( "8\" Standard Open-Base Cleat, 5/8\" Max. Line Dia., two 5/16\" FHMS, 1-5/16\"H from SCHAEFER")
|
|
Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-98
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->8" Wooden Block Brushes with Bumpers
Top-of-the-line brushes for use with Signature Series handleThese brushes work with our Signature Series and Heavy-Duty Handles. The soft brush has soft bristles with flagged ends to hold water and cleaning solution for gentle washing. The medium brush is for all around cleaning. The stiff brush uses corrugated fibers to break down heavy dirt and stains. Soft, medium or stiff bristles. Flagged ends on soft brush hold maximum amount of cleaning solution. Medium brush for all around cleaning.
Part No: 040151WM
|
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses->8" Wooden Block Brushes with Bumpers
Top-of-the-line brushes for use with Signature Series handleThese brushes work with our Signature Series and Heavy-Duty Handles. The soft brush has soft bristles with flagged ends to hold water and cleaning solution for gentle washing. The medium brush is for all around cleaning. The stiff brush uses corrugated fibers to break down heavy dirt and stains. Soft, medium or stiff bristles. Flagged ends on soft brush hold maximum amount of cleaning solution. Medium brush for all around cleaning.
Part No: 040150WM
|
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Scrub Brush Kits, Accessories->8" Wooden Block Brushes with Bumpers
Top-of-the-line brushes for use with Signature Series handleThese brushes work with our Signature Series and Heavy-Duty Handles. The soft brush has soft bristles with flagged ends to hold water and cleaning solution for gentle washing. The medium brush is for all around cleaning. The stiff brush uses corrugated fibers to break down heavy dirt and stains. Soft, medium or stiff bristles. Flagged ends on soft brush hold maximum amount of cleaning solution. Medium brush for all around cleaning.
Part No: 040152WM
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard Cable Tie Multi-Packs
Black cable ties have UV inhibitors added for extended protection and longer life.
Part No: 351255
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Multi-Pack Cable Ties with Mounting Hole
Cable Ties, with mounting hole (all require #10 screws except 228274 which requires #4 screw). . Pure virgin nylon 6/6 . Impervious to salt, chemical solvents, and acids.
Part No: 351249
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Multi-Pack Cable Ties with Mounting Hole
Cable Ties, with mounting hole (all require #10 screws except 228274 which requires #4 screw). . Pure virgin nylon 6/6 . Impervious to salt, chemical solvents, and acids.
Part No: 351248
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Galvanized Cleats
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
Part No: 040108
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Galvanized Cleats
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
Part No: 040808
|
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Galvanized Cleats
Beefy cleats for docks or work boats. Galvanized steel for corrosion resistance.
Part No: 040208
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard Cable Tie Multi-Packs
Black cable ties have UV inhibitors added for extended protection and longer life.
Part No: 351155
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Standard Cable Tie Multi-Packs
Black cable ties have UV inhibitors added for extended protection and longer life.
Part No: 351152
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Multi-Pack Cable Ties with Mounting Hole
Cable Ties, with mounting hole (all require #10 screws except 228274 which requires #4 screw). . Pure virgin nylon 6/6 . Impervious to salt, chemical solvents, and acids.
Part No: 351149
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Multi-Pack Cable Ties with Mounting Hole
Cable Ties, with mounting hole (all require #10 screws except 228274 which requires #4 screw). . Pure virgin nylon 6/6 . Impervious to salt, chemical solvents, and acids.
Part No: 351148
|
|
|
|
Home -> Cabinet & Deck Hardware -> Cleats & Chocks -> Mooring Cleats->Yacht Cleats, Chrome-Plated Brass
Chrome-Plated Brass Yacht Cleats.
Part No: S-0972C
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Maxi Fuses
Very economical, with tin-plated connector blades and visual indication of blown condition. A larger version of the automotive ATO/ATC fuse. 1000A Interrupt capacity. Max 32V DC.
Part No: 5143
|
|
|
