Top Sellers
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.
|
$100 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
$250 Gift Card from WEST MARINE
Not sure what to get for your favorite boater? Give the West Marine Gift Card! Use our Gift Card at more than 370 West Marine stores, online, or through our catalog at 1-800-BOATING for merchandise purchases and backorder or special order deposits. . SHIPPING NOTICE: Gift Cards shipping ground delivery will ship 1st Class Mail to any US address FREE. For an additional fee, Gift Cards may be shipped via US Priority Mail, Two-Day or Overnight service. The Gift Cards cannot be redeemed for cash.
|
WM Self-Coiling Hose - 15' from WEST MARINE
Featuring an improved flow rate and field-serviceable couplings! With an improved flow rate of 360gph, this hose delivers a powerful stream of water to make deck and boat wash-downs quick and easy. In the unlikely event of a rupture, the couplings can be removed with common hand tools, the hose shortened and the couplings replaced, which is a big advantage if you happen to be offshore! 90% usable length. Field-serviceable couplings. Strain relief at hose connection end'. 360gph flow rate.
|
West Marine 1000/Offshore PFD Rearming Kit from WEST MARINE
West Marine 1000/Offshore PFD Rearming Kit Style: Manual. Cylinder Weight: 33g. Cylinder Neck Diameter: 1/2" bayonet. Inflator Type: Secumar 401. Kit Contents: Cylinder with seal indicator. PFD Brands Commonly Used With*: West Marine 1000/Offshore PFD . Inflator Number: 401. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
West Marine/Stearns PFD Rearming Kit from WEST MARINE
West Marine/Stearns PFD Rearming Kit Style: Manual. Cylinder Weight: 16g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin. PFD Brands Commonly Used With*: West Marine/Stearns PFD. Inflator Number: 840. *The term "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Premium Engine Oil - SAE 30, gallon from WEST MARINE
Exceeds OEM requirements— will not void engine warranty. Recommended for engines requiring API CF-2 level performance. Exceeds warranty requirements for all diesel and gasoline engines specifying SAE 30 or SAE 40 grade and API service classifications including Caterpillar, Cummins, Detroit Diesel, Mack, Navistar, Volvo and Mann. Heavy-duty formulation minimizes engine wear to provide long engine life. Exceeds Mack EO-K/2 and Allison C4 specifications and CID A-A-52306A requirements .
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
|
1, from SEADOG, from WEST MARINE, 4"D from SLIDE ANCHOR, 2"L from BOATSAFE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926115ON
|
|
|
|
|
Keep your outboard looking good and protect it against the tough marine environment. Our motor hoods have been redesigned to better fit newer cowl sizes and later model engines.
Part No: 926115OR
|
|
|
|
Home -> Seating & Covers -> Covers & Biminis -> Bimini Tops->Zippered Storage Boots for Bimini BoaTops
Keep your Bimini BoaTop® neatly stored when you are not on the boat. Boots feature one separating zipper for easy on/easy off, and are made of marine vinyl to last for years.
Part No: 63188
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape->8511 Particulate Respirator w/Valve
Exhaust valve reduces build up of heat and humidityProvides the same level of protection as the 8210. In addition, it incorporates a patented exhalation valve that eliminates the uncomfortable, humid stuffiness associated with unvented masks. Ideally suited for work settings that involve heat, humidity, or long periods of wear. Primary Usage: Removes solid/liquid particles. Exhalation valve reduces heat/humidity buildup . Approvals: NIOSH 42 CFR 84 N95 (95% efficiency, not oil proof) .
Part No: 8511
|
|
|
|
|
Home -> Paint & Maintenance -> Paint Brushes, Rollers & Tape -> Personal Safety->8511 Particulate Respirator w/Valve
Exhaust valve reduces build up of heat and humidityProvides the same level of protection as the 8210. In addition, it incorporates a patented exhalation valve that eliminates the uncomfortable, humid stuffiness associated with unvented masks. Ideally suited for work settings that involve heat, humidity, or long periods of wear. Primary Usage: Removes solid/liquid particles. Exhalation valve reduces heat/humidity buildup . Approvals: NIOSH 42 CFR 84 N95 (95% efficiency, not oil proof) .
Part No: R8511ES
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Seats
Inflatable Boat Seats.
Part No: SSL430600
|
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Inflatable Boat Seats
Inflatable Boat Seats.
Part No: SSL430300
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings->Titanium Snap Shackles
Forged in HR stainless steel or Titanium. Designed and made in France. Available with swivel eye, large eye or swivel shackle. Ideal for spinnaker sheets. Outstanding working loads. Opens manually or with a fid.
Part No: 52653
|
|
|
|
Home -> Ventilation -> Blowers & Heaters -> Engine Room Heaters->Engine Compartment Heaters
Extend your boating season into the colder months with a BoatSafe® heater. These thermostatically controlled heaters automatically turn on at approximately 45°F to ensure that the air temperature in your engine room remains above freezing. Features include a press-to-test button (750W models) and a footprint choice option that enables mounting in any orientation. Forced air heat gently warms engine compartment surfaces. 250W model is for boats 24 feet or less and engine compartments to 150cu.
Part No: 250W-JR
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: D400
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Premium Pivoting Fluke Anchors->Kedge Anchors
This Lloyd’s certified, high-holding power anchor is ideal for larger craft and features special flukes and tips that deliver exceptional holding power in a variety of conditions. Forged, not cast, for high, consistent quality and strength. Easily stored on larger boats, the Kedge can be manufactured in larger sizes than listed here (call for a custom quote). Pros: Lloyd’s certified high holding power in all bottom types Cons: Expensive due to their large size, materials and construction.
Part No: SSD400
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY400
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Fixed Shank Scoop Anchors->Rocna Anchors
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .
Part No: ROCNA 40
|
|
|
|
Home -> Anchor & Docking -> Anchors->Delta™ Fast-Set Anchors
Easy handling, self-launching design sets fast in any seabed One-piece anchor has very high holding power and structural strength. Balanced to fall unaided from bow rollers, so it’s ideal for use with remotely operated windlasses. Heavy ballast in the toe section ensures that the anchor will engage the seabed upon hitting bottom. Lifetime warranty against breakage. Style: Non-Hinged Plow. Material: Galvanized-manganese steel or stainless steel. Application: All bottoms .
Part No: 0057440
|
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Bruce-Type Anchors->Manson Ray Anchors
Practical Sailor Best Choice among Heavyweight Anchors Anchors for the biggest, finest boats Designed for larger boats, Ray anchors are Lloyd’s certified as high-holding power anchors and are forged, not cast, for consistent quality of steel and measurements. Ray anchors are trusted to secure some of most famous ships including the world’s largest sloop, the Mirabella V. ) Pros: High holding (Lloyd's-certified) for larger boats to megayachts and ships. Forged—not cast—for quality; sets quickly.
Part No: SSRAY40
|
|
|
|
|
Home -> Anchor & Docking -> Anchors->Delta™ Fast-Set Anchors
Easy handling, self-launching design sets fast in any seabed One-piece anchor has very high holding power and structural strength. Balanced to fall unaided from bow rollers, so it’s ideal for use with remotely operated windlasses. Heavy ballast in the toe section ensures that the anchor will engage the seabed upon hitting bottom. Lifetime warranty against breakage. Style: Non-Hinged Plow. Material: Galvanized-manganese steel or stainless steel. Application: All bottoms .
Part No: 0057340
|
|
|
|
Home -> Electrical -> Batteries & Accessories -> Battery Accessories
8"D High Double Battery Box (91-2339) Battery box for 2 High D Batteries OD: 28"D, 24-1/2"W, 14-1/2"H; ID: 24-1/2"D, 21"W, 12-1/2"H.
Part No: 91-2339
|
|
|
|
Hayward Fishing trolling weights can be used with all makes of down-riggers.
Part No: HDRRC-08
|
|
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295182
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Economy Mushroom Anchors
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters. PVC coating is easy to clean and won’t scuff your boat.
Part No: 508-E-UPC
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->Spike Anchors
An easy-to-use tool for securing your boat off the beach, rocky or shale shoreline. Just drive the tubular handle downward to deliver the spike blade into the ground, then tie your boat off to the attached lower ring. For rock or shale, drive the spike in a few feet offshore where the ground is softer and attach a buoy and line to the top ring. The open, tubular handle will not trap air, water, or debris. Removes as easily as it drives in—by pulling the handle upward. Includes storage bag.
Part No: SOSS
|
|
|
|
Home -> Anchor & Docking -> Anchors -> River/Lake Anchors->River Anchors
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
Part No: 509-E-UPC
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Traditional Anchors
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .
Part No: 94040
|
|
|
|
Home -> Anchor & Docking -> Anchors -> Anchor & Rode Packages->Traditional Anchor & Rode Packages
Get a great grip on the bottom! Don’t skimp when it comes to keeping your boat safely anchored—we don’t! Our Traditional Anchor Package includes a precision-made West Marine Traditional Anchor (described above), generous amounts of high-quality, made-in-the-USA Acco proof coil chain, West Marine premium three-strand nylon line with five-tuck splice, thimble and two shackles. Style: Pivoting steel fluke . Material: Galvanized steel . Application: Sand or mud bottoms .
Part No: TR-8
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyebolts & U Bolts->Eye Bolts
Machined from 304 stainless steel.
Part No: 080483
|
|
|
|
|
Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyebolts & U Bolts->Eye Bolts
Machined from 304 stainless steel.
Part No: 080488
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->Bzzz Dinghy Braid
Light, strong, easy to grip and, because of its single braid construction, it won’t kink. Moves smoothly through blocks and multi-part tackles for use as sheets or traveler controls. The fibers are a combination of spun polyester and multi-filament polypropylene so it’s soft on the hand and won’t absorb lots of excess water weight. Stretch: 3. Best Use: Performance dinghy mainsheet and control lines on larger boats . Core Fiber/Construction: Spun polyester and multifilament polypropylene .
Part No: 1696-08-00600
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->T-900 Technora-Dyneema Double Braid
.
Part No: 2763-08-00600
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->T-900 Technora-Dyneema Double Braid
.
Part No: 2762-08-00600
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot -> Running Rigging->T-900 Technora-Dyneema Double Braid
.
Part No: 2761-08-00600
|
|
|
