Top Sellers
|
|
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
12 Volt White Dual Trumpet Mini Air Horn from AFI
White epoxy powder-coated finish over solid brass. Noncorrosive Lexan® diaphragm. 12vDC. . Draws 20 amps max. Includes compressor, air tubing, fittings, and hardware. 5" W x 3-3/4"H x 9-1/2" L.
|
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
|
Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".
|
Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.
|
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Rule-A-Matic Plus Float Switch from RULE INDUSTRIES
Is the float switch working? It's easy to check! Features a Rule-A-Matic float switch and an impact-resistant cover to protect against debris and jamming. Wiring is "blocked" by a rubber grommet to provide strain relief. Includes a convenient feature for manual tests. Activation Method: Float with mechanical contacts. Dimensions: 2-3/4"H x 2-1/2"W x 4-7/8"L. Capacity: 20A @ 12/24/32V DC.
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
|
|
CP Zinc Sliding Window Stop from PERKO
Chrome-plated zinc with plastic cover on stopping plate. . Base measures 3/4"W x 1 7/8"L. . Requires #8 fasteners (not included). . Stopping plate length: 1 1/2'' . Made in U. S. A.
|
|
9, 9-1, 9-3, 4" x 9-1, 4" x 9" Yamaha Outboard Propeller from MERCURY MARINE
|
This site contains about 37,785 documents.
|
|
View by:
Title
|
Category
|
Manufacturer
|
Part No
|
Price
|
|
Page:
1
200
300
400
500
600
700
800
900
1,000
1,150
1,160
1,170
1,180
1,190
1,200
1,210
1,220
1,230
1,231
1,232
1,233
1,234
1,235
1,236
1,237
1,238
1,239
1,240
1,241
1,242
1,243
1,244
1,245
1,246
1,247
1,248
1,249
1,250
1,251
1,252
1,253
1,254
1,255
1,256
1,257
1,258
1,259
1,260
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2841-08-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2832-08-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->VPC™ Line
VPC™ has a strong, lightweight core of Vectran and polyolefin surrounded by a durable UV-resistant polyester cover. VPC was designed specifically with the club racer in mind, and it fills the gap between traditional all-polyester rigging and more expensive grand prix racing lines. VPC is available in popular marine colors. Best use: Sheets & halyards on casual racers & offshore cruisers. Stretch: . 5% at 15% breaking strength. Low Elongation .
Part No: 2833-08-00600
|
|
|
|
|
Cordage->Running Rigging By The Foot->VPC™ Line
Part No: 2831-08-00600
|
|
|
|
Home -> Engine Systems -> Engine Parts->Replacement Fuel Water Separator Elements
Remove harmful contaminants without filtering detergent additivesRemove harmful contaminants without filtering detergent additives. Engineered for long life, low restriction and efficient filtering performance.
Part No: 18-7931
|
|
|
|
Home -> Safety -> Vapor Detectors
An ideal choice for installation on boats with enclosed areas and sleeping quarters that do not have a factory installed carbon monoxide detector or when additional carbon monoxide detectors are desired onboard. To install, simply mount to a wall or ceiling and connect the 9 volt batter. Extremely low battery draw of only . . Types of Vapor Monitored: Carbon Monoxide . Alarms: Visual & Audible . Minimum Vapor Leel for Activation: 10% COHb . Monitoring Algorithm: Time weighted Average .
Part No: CMD-1MR-9V
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Quicksilver Evinrude/Johnson Outboards Propellers
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.
Part No: QA3168R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2196R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2200R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains -> Aluminum Props->Quicksilver Yamaha Outboard Propellers
Three-blade aluminum one-piece propellers for Yamaha outboards. 9. 9–15hp, BF9. 9hp 1987 & up, BF15hp all years: Model 8640591. 15–28hp, 15hp 1976–83, 25hp 1977–79, 20hp 1976–78, 28hp 1976–78: Model 8640500. 40–60hp, 40/50hp (not T50) 1984 & up, 55hp 1976–95, 48hp 1995–2000, 60hp 1976–91*: Models 4744082, 8640187, 4744090, 8640203, 8640211, 4744116, 4744124, 8640229, 8640237.
Part No: QA3906R
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Halotron I Fire Extinguishers
Portable, handheld extinguishers are ideal for use against engine fires in the marine environment. Halotron I is a liquefied gas that dissipates after use, leaving no residue or clean up. It is an acceptable alternative to the banned Halon 1211 and is more effective, versatile and user-friendly than either water or carbon dioxide extinguishers. USCG-approved when properly mounted with approved brackets . Clean, EPA-approved agent. 1219443 is 8-3/4"x16-3/16"x7-1/4".
Part No: 466729
|
|
|
|
|
Home -> Safety -> Fire Extinguishers -> Portable Extinguishers->Halotron I Fire Extinguishers
Portable, handheld extinguishers are ideal for use against engine fires in the marine environment. Halotron I is a liquefied gas that dissipates after use, leaving no residue or clean up. It is an acceptable alternative to the banned Halon 1211 and is more effective, versatile and user-friendly than either water or carbon dioxide extinguishers. USCG-approved when properly mounted with approved brackets . Clean, EPA-approved agent. 1219443 is 8-3/4"x16-3/16"x7-1/4".
Part No: 466728
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2120R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2122R
|
|
|
|
|
Home -> Engine Systems -> Propellers & Drive Trains->Mercury Outboard Propellers
Three-blade (NOTE: Model 8640310 has four blades) aluminum one-piece propellers for Mercury outboards. 5hp 1990 & up, 3. 3hp 1993 & up, 3hp 1990–92: Model 5037700. 4–6hp, 4–5hp 2-stroke 1987 & up, 4-stroke 1999 & up: Models 5037726, 5037734. 6–15hp 2-stroke, 6–9. 9hp 2-stroke 1999 & up, 8–9. 9hp 4-stroke 1995–2004, 10–15hp Sea Pro/Marathon 1995 & up, 15hp 2 & 4 stroke 1989–2006: Models 5037692, 4744132. 9hp 4-stroke 2005 & up: Models 7890361, 7890379, 8640302.
Part No: QA2192R
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S30-9
|
|
|
|
|
Home -> Plumbing -> Marine Sanitation->Tank Tender
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
Part No: S60-9
|
|
|
|
Home -> Paint & Maintenance -> Scrub Brushes & Hoses -> Hose & Hose Accessories
With nine spray patterns to meet your needs, this nozzle also includes a unique “power bail” graduated flow adjuster. Full-forward shuts water off. As you pull it back, flow adjusts from a trickle to full-blast.
Part No: WN1150U
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling -> Air Conditioning->EnviroComfort Reverse-Cycle Self-Contained Air Conditioners
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
Part No: 207400305
|
|
|
|
Home -> Ventilation -> Air Conditioning & Cooling->EnviroCool Self-Contained Air Conditioners
capacities to accomodate boats in the 25–40 foot range. These systems use R-417A refrigerant, an environmentally safe, green gas. Outstanding features include high-velocity motors with no overhang for a compact footprint plus a stainless-steel drain pan and pre-installed return air filter that can be easily removed and cleaned. Systems come complete with a seawater pump plus all the pieces and parts you need (from seawater intake to supply air grille) for a professional installation. models.
Part No: 207444305
|
|
|
|
Home -> Boats & Motors -> Dinghies -> Rigid Dinghies
When getting to the water fast and easily is crucial for you, the Bass Hound has got you coveredIt’s small and lightweight enough for you and a fishing buddy to toss in the back of a pickup, but durable enough to last with dent-resistant. Pre-wired for a trolling motor at bow and stern for mounting versatility. A built-in livewell with drain and aerator pump and comfy twin swivel fishing chairs help make this the freshwater angler’s most useful tool next to your rod, of course.
Part No: BT94DG
|
|
|
|
Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C90W
For overhead or dash mounting of System NavPods.
Part No: GP1052
|
|
|
|
Home -> Electronics -> Boat Instruments->Navpod Instrument Housing Precut for Raymarine C120W
For overhead or dash mounting of System NavPods.
Part No: GP1173
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Ladder Standoffs
Aluminum standoffs with cushioned tips fit traction-molded poly step to support ladder against hull without marring. Sold in pairs.
Part No: 99001:01
|
|
|
|
Home -> Electronics -> Boat Instruments->PreCut Furuno MFD12
The Grand Prix series has double seal for watertight intergrity, tamperproof fasteners and polished stainless steel.
Part No: GP1033
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Flight Line Polypropylene Double Braid
Great for lightweight spinnaker sheets Lightweight, nonabsorbent polypropylene cover and 100% Dyneema core makes this line an excellent choice for light-air spinnaker sheets on larger one-design vessels such as Ynglings, Lightnings and Thistles. The strong, flexible, low-stretch line has a braided core and is easily tapered. It’s soft on the hands and gets even softer with use, making it a great choice for performance dinghy mainsheets. Super-lightweight line stays dry and light even when wet.
Part No: 2343-09-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Flight Line Polypropylene Double Braid
Great for lightweight spinnaker sheets Lightweight, nonabsorbent polypropylene cover and 100% Dyneema core makes this line an excellent choice for light-air spinnaker sheets on larger one-design vessels such as Ynglings, Lightnings and Thistles. The strong, flexible, low-stretch line has a braided core and is easily tapered. It’s soft on the hands and gets even softer with use, making it a great choice for performance dinghy mainsheets. Super-lightweight line stays dry and light even when wet.
Part No: 2342-09-00600
|
|
|
|
|
Home -> Sailboat -> Running Rigging By The Foot -> Running Rigging->Flight Line Polypropylene Double Braid
Great for lightweight spinnaker sheets Lightweight, nonabsorbent polypropylene cover and 100% Dyneema core makes this line an excellent choice for light-air spinnaker sheets on larger one-design vessels such as Ynglings, Lightnings and Thistles. The strong, flexible, low-stretch line has a braided core and is easily tapered. It’s soft on the hands and gets even softer with use, making it a great choice for performance dinghy mainsheets. Super-lightweight line stays dry and light even when wet.
Part No: 2341-09-00600
|
|
|
|
|
Home -> Cordage -> Running Rigging By The Foot->Flight Line Polypropylene Double Braid
Great for lightweight spinnaker sheets Lightweight, nonabsorbent polypropylene cover and 100% Dyneema core makes this line an excellent choice for light-air spinnaker sheets on larger one-design vessels such as Ynglings, Lightnings and Thistles. The strong, flexible, low-stretch line has a braided core and is easily tapered. It’s soft on the hands and gets even softer with use, making it a great choice for performance dinghy mainsheets. Super-lightweight line stays dry and light even when wet.
Part No: 2346-09-00600
|
|
|
|
Home -> Engine Systems -> Control Systems->3300 Universal Control Cables
.
Part No: CC17209
|
|
|
