18' Control Cable from TELEFLEX
Fits all Mercury and MerCruiser (1965–present) and Mariner 40hp and over (1993–present) engines. Engine and controls must both be Mercury or MerCruiser to work with these cables. Check engine or throttle ends for stamped length or measure tip-to-tip.

33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.

Side Mount - Trim, Tilt, Cut-Off Switch I/O, Chrome from TELEFLEX
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.

Hot Foot Throttle Omc/Merc from T-H MARINE
Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables. Aluminum pedal. Stainless hardware. Non-stick bearing surfaces.

Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .

1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .

Safe-T QC Helm from TELEFLEX
For use in almost all stern drive, inboard and other power-assisted applications where No Feedback steering is not required. Single Station. Boat Type: All stern drive, inboard, and power-assisted applications. Steering Type: Rotary Safe-T quick helm. Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H. Steering Wheel: Up to 16". Not included. Steering Wheel Shaft: 3/4" tapered. Cable Type: QC II (SSC62). Mounting Hardware: Included.

4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.

SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.

Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .

SeaStar 1.7 Front Mount Helm from TELEFLEX
Replacement front mount hydraulic helms for your steering system. Each helm has a 4-7/16" footprint, 3/4" tapered shaft and nut. To verify which helm you have, simply look at the end of your steering shaft for a 1. 7, 2. 0 or 2. 4 stamping. This is the helm only, but we recommend during installation that you thoroughly inspect hoses and connections for signs of excessive wear.