Top Sellers
1/4" NPT X 5/16" Brass hose barb from MOELLER
1/4 NPT X 5/16" Brass hose barbs with male threads.
|
|
|
#810 Fillable Caulking Tubes from WEST SYSTEM
These applicators are great for injecting large amounts of epoxy, laying a lengthy bead of epoxy or making fillets. Large-volume applicators for use with a standard caulking gun. . Suitable for refilling during continuous use. Should be disposed of after epoxy cures. . Holds approximately 10 fl. oz. . Package of 2.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
Rim Latch Sets - Reverse Bevel with Flush Strike from PERKO
Chrome-plated zinc. Sliding lock button. Case size: 2 1/8'' x 1 3/4''. Escutcheon Size: 4 3/8'' x 1 1/4''. For Door: 5/8'' to 1 3/8''.
|
Calibrated Resin Pump Set from MAS EPOXY
For use with 1 quart, 1/2 gallon, 1 gallon, 4 gallon and 5 gallon size containers.
|
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
|
|
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights RailLight charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
Striping Tape - Dark Blue, 3/4" from SEAFIT
Premium 2mil. thick vinyl striping tape makes it easy to add a colorful accent to your boat! Made from the same material used in quality custom boat graphics. It will not crack or peel, even in salt water, and the colors last from 5–7 years without fading. It can even be applied below the waterline. It can be bent, waved, and applied around corners. Should you change your mind or decide to update the look of your boat, simply remove the tape–no need to sand or ruin your paint or finish.
|
Pro Baitmaster™ Heavy-Duty Livewell Pump from SHURFLO
The fast and easy way to change your oil With a sealed switch and splash-proof "Shurcote II" seamless motor shell, this pump thrives in wet environments, such as continuous-duty live well (tanks under 35 gallons) or wash down applications. It features a run-dry capability and is designed to not overheat with extended use. Switch Type: Sealed 45 psi pressure switch . Material: Glass-reinforced nylon body and base-plate . Port Sizes: 1/2" NPS male . Dimensions: 5. 4"H x 5.
|
Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
|
|
|
Shrink Wrap System Hardware Kit from DR. SHRINK
Protect your boat from rain, snow, UV damage, airborne debris and pests during winter storage During long periods of storage, your uncovered boat is susceptible to damage from a number of sources–rain, snow, blowing dirt and debris, bird droppings, UV radiation and nesting birds and rodents. ”Wrap-It-Up“ is a do-it-yourself shrink-wrap system that provides your boat with the protection it deserves during the long off-season. Buy it once and reuse it year after year. Buy a new kit every year.
|
Teak Plugs - 3/8" from SEAFIT
Use these teak plugs to cover screw heads or fill small holes for a beautiful smooth finish to your installation. Sizes: 1/4" 5/8" 5/16" 3/8" 1/2" 1".
|
|
Package of 4 from SEAFIT, 5"H from TAYLOR, Package of 2 from SEAFIT
|
|
Home -> Seating & Covers -> Seating->Cooler Swingback Chair With Backrest
Conveniently load your 72- or 94-quart cooler at home and then stow it right beneath this Cooler Swingback Chair with Backrest. Without a cooler, the chair’s frame cordons off an ample dry storage area. Features stainless-steel swing arms, and plush marine-grade vinyl upholstery. Swingback chair frame can be attached by thru-bolting to the deck. Dimensions: 22" H x 46"W x 19 5/8"D (outer); 18"H x 44"W x 17"D (inner). Overall height: 37 1/2".
Part No: 2003-CS
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! COOLMATIC Compressors have integrated, adjustable low-voltage cutout protection, quiet fan cooling and self-sealing valve couplings to make installation easy. Cooling is provided by electronically controlled Danfoss BD35F compressors with their output “fine tuned” to match the evaporators. Designed for small ice boxes up to 5 cu. In use they are quiet, efficient and require almost no maintenance. Condensing unit and evaporator can be up to 8 ft.
Part No: CU-54
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Our most affordable ice box conversion systems! COOLMATIC Compressors have integrated, adjustable low-voltage cutout protection, quiet fan cooling and self-sealing valve couplings to make installation easy. Cooling is provided by electronically controlled Danfoss BD35F compressors with their output “fine tuned” to match the evaporators. Designed for small ice boxes up to 5 cu. In use they are quiet, efficient and require almost no maintenance. Condensing unit and evaporator can be up to 8 ft.
Part No: CU-55
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers -> Refrigeration Conversion
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor unit is tuned for higher efficiency. This configuration is suitable for ground insulation. Five evaporator styles to suit your space are available (sold separately) . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 15. 19”W (386 mm) x 5. 11”D (130 mm) x 6.
Part No: CU-84
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor is tuned for higher efficiency. This configuration is suitable for shelf mounting. Five evaporator styles to suit your space are available . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 8. 66”W (220 mm) x 8. 66”D (220 mm) x 6.
Part No: CU-85
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers
Designed for larger boxes and use in warmer waters, the Danfoss BD35F compressor is tuned for higher efficiency. This configuration is suited for floor and wall mounting. Five evaporator styles to suit your space are available . Can be powered by either 12 or 24 volt systems . Amp draw is approx. 3. 5A-5. 5A@12V DC, depending on evaporator style . Dimensions: 8. 66”W (220 mm) x 6. 97”D (177 mm) x 6.
Part No: CU-86
|
|
|
|
Home -> Cabin & Galley -> Refrigeration & Coolers->Coolmatic Cooling Kit
Kit turns an insulated space into a 12V refrigerator This compact do-it-yourself kit is ideal for easily converting an existing, passive insulated cooling area into a full, high performing compressor-powered refrigerator unit. AC Adapter offers problem-free connection to 110/240 volts AC power.
Part No: CS-NC-15
|
|
|
|
Home -> Fishing -> Trolling Motors -> Trolling Motor Access.->Copilot Systems
Wireless control for PowerDrive, PowerDrive with Autopilot and Riptide with Autopilot trolling motors. Full command of your boat’s steering and acceleration is at your fingertips! The Copilot and Riptide Copilot are wireless remote steering systems which provide control, versatility and the flexibility to cast and fight fish from anywhere in your boat. Attach remote to your wrist, belt or snap-lock rod mounting brackets . Receiver mounts to the right sideplate. Includes: Receiver .
Part No: 1866100
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories
Copper-clad clips are large enough to fit marine battery terminals.
Part No: SC-3029AB
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-QT
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories->Copper Grounding Foil
This is the “right stuff” for installing sensitive electronics like SSB and Ham radios that need a counterpoise to work as effectively as possible. Pure copper foil is 3" wide, 0. 003" thick.
Part No: GW0065
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories
This is the “right stuff” for installing sensitive electronics like SSB and Ham radios that need a counterpoise to work as effectively as possible. Pure copper foil is 3" wide, 0. 003" thick.
|
|
|
|
Home -> Electronics -> VHF Radios & Communications -> VHF Accessories->Copper Grounding Foil
This is the “right stuff” for installing sensitive electronics like SSB and Ham radios that need a counterpoise to work as effectively as possible. Pure copper foil is 3" wide, 0. 003" thick.
Part No: GW0064
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0001-W
|
|
|
|
Home -> Sailboat -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0007-W
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0003-W
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0005-W
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0002-W
|
|
|
|
Home -> Cordage -> Rigging Products->Copper Stop Sleeves
Circular sleeves are used for halyard stops.
Part No: K0754-0004-W
|
|
|
|
Home -> Seating & Covers -> Carpet, Vinyl & Canvas->Sunbrella® Fabric, 46" Wide - By The Linear YARD
Any boat owner knows how the elements can treat a boat, not to mention a boat fabric. But no other marine fabric on earth withstands the ravages of water, sun, salt or wind better than Sunbrella®. You can use Sunbrella® fabric to cover and coordinate your current accessories, or make new ones using your sewing machine Sunbrella® works just as well inside your boat, too. So your baby will look young for a long time. For questions concerning color selection, call our Tech Sales Specialists.
Part No: 300152
|
|
|
|
Home -> Electronics -> Autopilots -> Sailboat Pilots->SmartPilot X-5 Wheel Pilot
The innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. The control unit and patented fluxgate compass are mounted separately for easy access and optimum performance. Select the corepack (without a control head, but including the course computer, fluxgate compass and drive unit) if you already have a control head and only need the rest of the autopilot system.
Part No: E12133
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts for Perko 0493-Series Raw Water Strainers
Replacement Gaskets, Strainer Baskets & Bolts for 0493-Series Strainers.
Part No: 0493DP599M
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts for Perko 0493-Series Raw Water Strainers
Replacement Gaskets, Strainer Baskets & Bolts for 0493-Series Strainers.
Part No: 0493DP799M
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Replacement Parts for Perko 0493-Series Raw Water Strainers
Replacement Gaskets, Strainer Baskets & Bolts for 0493-Series Strainers.
Part No: 0493DP999M
|
|
|
|
Home -> Seating & Covers -> Seating->Corner Armrests
Designed to complement the deluxe pontoon lounge seat these armrests are either square or radius. Square armrests are interchangeable; radius armrests have a radius corner cut on the outside front edge, so left and right are not interchangeable. Both square and radius models have a recessed drink holder. Wood frame: 9"W x 23"H x 23"D Plastic frame: 6 1/2"W x 24 1/2"H x 21 1/2"D Sold individually.
Part No: 110W-221
|
|
|
|
Home -> Seating & Covers -> Seating->Corner Armrests
Designed to complement the deluxe pontoon lounge seat these armrests are either square or radius. Square armrests are interchangeable; radius armrests have a radius corner cut on the outside front edge, so left and right are not interchangeable. Both square and radius models have a recessed drink holder. Wood frame: 9"W x 23"H x 23"D Plastic frame: 6 1/2"W x 24 1/2"H x 21 1/2"D Sold individually.
Part No: 112W-221
|
|
|
|
Home -> Seating & Covers -> Seating->Corner Armrests for Deluxe Pontoon Lounge Seats
Designed to complement the deluxe pontoon lounge seat, these armrests are either square or radius. Square armrests are interchangeable; Radius armrests have a radius corner cut on the outside front edge, so left and right are not interchangeable. Recessed drink holder . Molded plastic frame: 24"H x 9"W x 21 1/2"D . Sold individually .
Part No: 105W-221
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Heavy Duty Dock Bumpers
The ultimate in durable docking protection. Dock Pro heavy-duty bumpers are ideal for rough conditions and are made from UV resistant, marine-grade vinyl. The straight-mount model affixes easily to flat surfaces and pilings and the corner-mount provides the same protection on right-angle sections. Both models have inflation valves for variable firmness. Material: Vinyl . Attachment Method: Screw Mount . Cross Section Shape: Molded Arch . Shock Absorption Mechanism: Air Cushion .
Part No: 45510
|
|
|
|
Home -> Navigation -> Charts & Chart Catalogs -> Fishing and Specialized Charts->Western U.S. Fishing Maps
Fish-n-Map Company's Underwater Topography Fishing Maps are printed on a waterproof, tear-resistant plastic material. Maps are folded to 9" x 4"; when opened, each map is approximately 3' x 2' in size.
Part No: 11104
|
|
|