Welcome! Please Sign-In
Top Sellers
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
2-5/8" x 1-1/2" Euro Utility Hinge from WEST MARINE
Stamped utility hinge with 1/2" offset from TACO. Made of marine grade 304 stainless steel with polished finish, non-corrosive utility hinge is ideal for hatches, cabinets, and doors inside and outside the boat. Measures 2-5/8" x 1-1/2" x .
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".
Trapeze & Vang Cleat from CLAMCLEAT
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
Flex Trim - Black 1/2" opening from TACO PRODUCTS
Flex Trim - Black 1/2" opening from TACO PRODUCTS
For a beautiful finished look on unfinished edges. Just push it on and it's on to stay. Grips on difficult materials, compound curves, etc. Individual corrosion resistant aluminum clips for a permanent grip. Black or White . Sold in 25' lengths. . Available in four sizes:. 5/32" opening x 35/64"H. 1/4" opening x 1/2"H. 3/8" opening x 5/8"H.
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
ABS In-Line Check Valve from BECKSON MARINE INC
1-7/8" Polished Brass Flush Ring Pull from ABI
1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
Hose Adapter, From 1-1/8" to 3/4"-5/8" from RULE INDUSTRIES
#69 is stepped & adapts from 1-1/8" to 3/4" - 5/8" #57 is an elbow & adapts from 1-1/8" to 1" NPT #67 adapts from 1-1/2" to 1-1/8".
Teak Winch Pad Cant - 7 1/4" from AFI
Teak Winch Pad Cant - 7 1/4" from AFI
Base diameter is 1/2'' larger than top diameter.
PE-1 Lexan Mast Pad Eye from FORESPAR
PE-1 Lexan Mast Pad Eye from FORESPAR
For use on our small poles. 1-3/4"H x 1-1/4" x 5/8"dia. ring. Same ring as supplied with 4-8 and 6-12 poles.
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Flipper Pump from WHALE PUMPS
Flipper Pump from WHALE PUMPS
Easy back-and-forth action produces one-way discharge. Spout swivels. Made of nylon, aluminum and synthetic rubber. For 1/2"ID hose. Material: Nylon, aluminum, rubber . Capacity: 2gpm . Dimensions: 7-1/8"H x 6"dia. . Cutout Size: 2". Clearance: 4-1/2" .

D, D - 1, 1-1, 2-1, 5" D from TRIDENT RUBBER, D Shackle, x 7-1, 15mm x 1, 8"H x 1

Cylinder Locker - Double, 20 LB, 21-1/2" H x 30-1/2" W x 16" D from TRIDENT RUBBER Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Marine LP Cylinder Locker
Built to ABYC specifications. High-quality fiberglass construction. Fully assenbled with leak-tested ABYC regulator with gauge, 12V DC low presssure brass solenoid, gas control panel, straight-through fittings for solenoid wiring and L. P. gas supply hose and a thru-hull fitting for bottom vent. Also fitted with stainless-steel hinges, chromed-brass, quick-release hatches, rubber gasket and screw-down cylinder clamp. The singe 10lb. units hold steel or aluminum tanks. The single 11lb.
Part No: 1502-0020
Cylinder Locker - Single, 10 LB, 20" H x 15.75" x 17.25"D from TRIDENT RUBBER Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Marine LP Cylinder Locker
Built to ABYC specifications. High-quality fiberglass construction. Fully assenbled with leak-tested ABYC regulator with gauge, 12V DC low presssure brass solenoid, gas control panel, straight-through fittings for solenoid wiring and L. P. gas supply hose and a thru-hull fitting for bottom vent. Also fitted with stainless-steel hinges, chromed-brass, quick-release hatches, rubber gasket and screw-down cylinder clamp. The singe 10lb. units hold steel or aluminum tanks. The single 11lb.
Part No: 1501-0010
Cylinder Locker - Single, 11 LB, 13.5"H x 14.5" W x 16.5" D from TRIDENT RUBBER Home -> Cabin & Galley -> Stoves & Propane System -> Propane Systems->Marine LP Cylinder Locker
Built to ABYC specifications. High-quality fiberglass construction. Fully assenbled with leak-tested ABYC regulator with gauge, 12V DC low presssure brass solenoid, gas control panel, straight-through fittings for solenoid wiring and L. P. gas supply hose and a thru-hull fitting for bottom vent. Also fitted with stainless-steel hinges, chromed-brass, quick-release hatches, rubber gasket and screw-down cylinder clamp. The singe 10lb. units hold steel or aluminum tanks. The single 11lb.
Part No: 1501-0011
Cylindrical, 10-1/8"dia. x 7-1/2"D, 11/16" Flange, 2-1/16" Drain from AMBASSADOR MARINE Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower->Stainless Steel Sinks and Basins
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.
Part No: S14-2700-UM-D
Cylindrical, 11-3/4"dia. x 7-1/2"D, 13/16" Flange, 2-1/16" Drain from SHURFLO Home -> Plumbing -> Freshwater Systems -> Sinks, Faucets & Shower
Ambassador Marine Ultra-Mirror Cylinder Sink Made from the highest grade 304 stainless steel available, this sink has a surface quality that is unmatched in the industry. Exclusive SoundKOTE Noise Reduction Technology reduces the unpleasant clanging sound so often associated with stainless steel sinks. 11" dia. x 7"D. Most sinks work with over- or under-mount installations. All sinks are made from heavy gauge stainless steel.
Part No: S14-2701-UM-D
D - 1.5 Liter Pitcher, Clear from STRAHL Home -> Cabin & Galley -> Appliances & Cookware->Unbreakable Beverageware and Tableware
Set your table in style with this beautiful and unique glassware. Superior to acrylic, unbreakable Makrolon is a polycarbonate that's molded into thick, heavy forms and specially hand finished to stand up to hard use and repeated dishwashing.
Part No: 70000
D - Socket Type Rod Holder Mount, Fits Tempress Fish-On and Roberts Rod Holder Sockets from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables->Single-Mount - Table Mounting Hardware
Single Mount Kit to install Magma's cutting/service tables.
Part No: T10-360
D - Table Mount, Dual-Mount, Barbeque Swing Arm from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables->Dual-Mount - Table Mounting Hardware
Dual-Mount Table Mounts. 6" & 12" Table Height Extension Sets for use with T10-525/520 (models 474827 & 447805) deck socket mount kits. Use Barbecue Swing Arm Mount only with 525/520 deck socket mount kits (models 474827 & 447805), Note: height extension set cannot be used with this kit.
Part No: T10-515
D Shackle, Allen Key Pin, 12 dia (15/32") from WICHARD Home -> Sailboat -> Shackles, Snaps & Fittings->Keypin Shackles, Captive Pin
Wichard Keypin shackles are easily opened by a single half turn, bu tremains captive within the body of the shackle. Keypin shackles with a bar allows the line, thimble or grommet to remain attached to the shackle when the pin is released.
Part No: 01306
D-Humidify Hanging Bag from WEST MARINE Home -> Ventilation -> Dehumidifiers, Air Purifiers->D-Humidify Moisture Absorbers
Protects interiors from mold and odors economically!D-Humidify is the easy, non-electric way to protect the interior of your boat from the damaging effects of accumulated moisture. The special chemical formula absorbs unpleasant musty odors caused by stagnant air and creates a fresher, healthier environment. Once the white pellets are exposed to the surrounding air, the pellets absorb excess moisture and liquefy into a brine (salt solution). Nontoxic, septic safe and environmentally friendly.
Part No: FG80
D-Icer™ Accessories from TAYLOR Home -> Anchor & Docking -> Fenders & Docking
Replacement parts and accessories for the Taylor Made Oiless D-Icer.
D-Shock 6'6" Spinning Combo from DAIWA Home -> Fishing -> Rod & Reel Combinations->D-Shock Spinning Combo
An affordable rod/reel combo for family fishing Everyone in the family will enjoy fishing with this versatile rod and reel combo. Affordable medium-action spinning combo features a graphite, three-ball-bearing reel with reverse taper aluminum spool and right or left hand retrieve and a durable fiberglass blank with cork grips and stainless reel seat. Length: 6'6"L.
Part No: DS25-3B/F6
D-Shock Freshwater Spinning Combo from DAIWA RODS/REELS Home -> Fishing -> Rod & Reel Combinations
This freshwater combo pairs a DSC-3B spinning reel and a two-piece, 6' 6" fiberglass rod. Reel is comprised of a Graphite body with an ABS Aluminum Spool. 170yds.
Part No: DSC25-3B/F662M
D-Sponge Gasket, 3/8"H x 1/2"W x 7'L from TACO PRODUCTS Home -> Cabinet & Deck Hardware -> Windshields->Installation Foam & Gaskets for Windshields & Hatches
Easy do-it-yourself solution for door, windshield or hatch leaks. Specially formulated sponge rubber is engineered to withstand corrosive environments. Windshield Screw Cover Foam gives your windshield a finished look.
Part No: V30-0731B7-1
D-Wave Saltwater Spinning Combo from DAIWA RODS/REELS Home -> Fishing -> Rod & Reel Combinations
Everyone in the family will enjoy fishing with this affordable medium-action spinning comboGraphite digigear reel with ABS aluminum spool features a Twist Buster line roller to prevent snags, and a Gyro-Spin Balanced Rotor for a smooth, wobble-free retrieve.
Part No: DWV40-B/F702M
D: Single Drinkholder - 3.4" x 4.62" x 4.62" from SNAPIT Home -> Cabin & Galley -> Appliances & Cookware->SnapIt! Accessories
White poly accessories snap directly onto 1" rails.
Part No: H001
D. 1-1/4"L x 3/8"W Eye Strap, 5/32" Fairlead Width, 1-1/16" Hole Centers, Two #8 RHMS Fasteners from RONSTAN Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Stainless-Steel Eye Straps
Eye straps are convenient for lashing points and attaching control line leads or blocks.
Part No: RF498
D. Connector & Hatch Pin Clip - 3/4''Dia. from TIEDOWN ENGINEERING Home -> Anchor & Docking -> Fenders & Docking->Dock Fastener Sets
Connector Pin and Hitch Pin Clip.
Part No: 26531
D. Hunter 23/O'Day 272, Length 43", Height at tip 9 3/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE Home -> Sailboat -> Tiller & Rudder->Laminated Replacement Tillers
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.
Part No: 2300
D. Male Thread Connector, 5/8" OD x 1/2" NPT from SEATECH Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002401-1008
D. Male Threaded Connector, 15mm x 1/2" NPT from SEATECH Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Not only are they original equipment on Hatteras, Hunter, Wellcraft, and Sea Ray yachts, but these easy-to-use quick-connect fittings make your plumbing installation and repairs a snap! Leak-free connections can be made with hot or cold potable, fresh - or saltwater in boats and RVs. No screwing or clamping required. To install, cut piping to correct length, then push pipe into fitting until it hits the internal stop. To disconnect, push in on fitting collar and hold down while removing pipe.
Part No: 002402-0815
D. Rail Mount Adapter - 4" x 1 "x 2" from WEST MARINE Home -> Fishing -> Fishing Accessories->Rod Holder Mounting Brackets
Adapt the Striker Grip and Baitcaster Holders to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round & 1” square rails. Flush Deck Mount includes rain cover. Adapt the Striker Grip and Caster Grip to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round and 1” square rails.
Part No: 242WEST-BK
D. Rail Mount Adapter (White) - 4”x 2” x 2” from WEST MARINE Home -> Fishing -> Fishing Accessories->Rod Holder Mounting Brackets
Adapt the Striker Grip and Baitcaster Holders to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round & 1” square rails. Flush Deck Mount includes rain cover. Adapt the Striker Grip and Caster Grip to your boat. Surface Deck Mount allows flat or vertical mount. Rail Mount Adapter fits 7/8”–1” round and 1” square rails.
Part No: 242WEST-WH
D. Top Cap, 3/4" from TACO PRODUCTS Home -> Seating & Covers -> Covers & Biminis -> Bimini & Cover Hardware->Bimini Top Ball & Socket Fittings
Tired of looking at your old corroded bimini top hardware? Replace it with our 316 Stainless Steel Ball and Socket Fittings by Taco. The ball and socket design allows full rotation of the top frame. Rugged design also makes it quick and easy to fold and remove the frame. Deck hinges include pins and lanyards for secure positioning and quick release. Delrin inserts ensure smooth movement and tight rattle free fit. Fits 7/8", 3/4" and 1" tubing.
Part No: F11-0182-1
D. Tublar Turnbuckle with Eye from JOHNSON, C.S. Home -> Cordage -> Rigging Products->Splice Lines Lifeline Fittings
Popular Johnson lifeline fittings are now available with eye ends for today's high-tech low stretch line. Recommended for use with 1/4" Amsteel or similar single braid, which weighs one seventh as much as 1/4" 1x19 cable and costs about the same amount. Johnson advises replacing the line at three year intervals. . Professional splicing recommended.
Part No: LS-1900
D.) 78-96 Heavy-Duty Diamond Base from SCHAEFER Home -> Sailboat -> Shackles, Snaps & Fittings -> Eyestraps, Fairleads, Bails->Round Base Stainless-Steel Pad Eyes
Round pad eyes are measured inside hole to inside hole, not across the middle (not shown). Diamond pad eyes are measured on the long axis (A), followed by the narrow axis (B). Some models have slight variations due to imprecise machining when countersinking. MFR Desc Base SW Inside Fasteners Hole Centers A Hole Centers B A. 78-07 Heavy Duty Round Base 2 1/2" dia. with 3/8" bail 5,000 1" x 13/16" four 1/4" FHMS 1 1/2" 1 11/16" B.
Part No: 78-96
D) Inside Corner with 2" Pipe Holder from TIEDOWN ENGINEERING Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26405
D) Inside Corner with 3" Pipe Holder from TIEDOWN ENGINEERING Home -> Anchor & Docking -> Fenders & Docking -> Dock Hardware->Dock Assembly System
We offer a complete line of rugged dock hardware for building a dock at your summer cabin or waterfront home. Designed primarily for noncommercial users, it’s sturdy enough for boat yards and smaller marinas. Once you have a plan and materials list, we’ll supply the hardware and your local lumber yard can provide the wood. For ideas on constructing your own dock, taek a look at detailed plans at http://www. tiedown. Several sizes of float drums are available, please search under Model 140264.
Part No: 26404
D12 DirectTV Receiver from KVH INDUSTRIES Home -> Electronics -> Video, Stereos, Weather Radios->DirectTV Receivers
KVH TracVision DIRECTV receivers with IR remote control Satellite Receivers.
Part No: 19-0503
Dacron Sail Repair Tape, 3" x 15' from BAINBRIDGE Home -> Cordage -> Rigging Products -> Rigging Tape->Dacron Sail Repair Tape
Make emergency sail repairs with tough, sticky Dacron tape For temporary, emergency sail repairs. Much tougher, stronger, and stickier than spinnaker repair tape.
Part No: J613WT
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12