5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
Stainless-Steel Cotter Rings.

Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.

5" Stainless-Steel Chock, Requires Two #10 FHMS Fasteners from PERKO
Fasteners not included.

Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.

Polycord Value Pack (10 polycords in assorted colors & lengths) from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.

30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

Elbow 90 Degree, Angle 2-way, 1" Stainless Steel from WEST MARINE
Bow Rail and Handrail Replacement Products Stainless steel fittings are made from high-quality cast and polished 316 stainless steel. Chrome Zamak fittings are made from double-chrome-plated zinc. Fittings are drilled and countersunk for #10 fasteners and include 1/4"-28 stainless set screws. Type 304 stainless steel tubing is TIG (ultra high heat) welded, polished and buffed.

Jaw & Swage, 3/32" Wire, 10-32 Thread, 3/16" Pin Dia., 1000lb. Tens. Strength, 2-1/2" Adj. L from JOHNSON, C.S.
Series 03 and 04 include LH upper terminals (unless designated RH).

Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.

CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.

300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Marine Toilet Tissue, 4-Pack from THETFORD
Thetford Marine Toilet Tissue, 4-Pack Snowy white 1-Ply Tissue . Soft and gentle . 100% biodegradable .

Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .