Top Sellers
|
|
|
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
C-10 Thermostat Controller from KASCO MARINE INC.
Kasco's NEW C-10 Thermostat Controller is designed to save you money on your electric bills The C-10 differs from our existing C-20 Controller, in that, it only uses Air Temperature to operate the De-Icer. Simply use the dial to set a temperature in which you want the De-Icer to turn on and plug the C-10 into a standard 120V outlet.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
|
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
|
|
Polycord Value Pack (10 polycords in assorted colors & lengths) from POLYFLEX
Unaffected by chemicals, sunlight, salt water and oil. Perfect for cover tie-downs, lashing jibs on deck when the chute is up, etc. Molded elastomers with glass-reinforced nylon hooks always return to original length.
|
CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.
|
|
Dia #10, Pack of 10 from FASCO FASTENERS
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Phillips Flat Head Machine Screws
Type 18-8 stainless steel.
Part No: 0774BP-A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 774A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3014A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 767
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 4770B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 4771C
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Nylock Nuts - Macro Pacs
Type 18-8 stainless steel.
Part No: 1332MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Cap Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1357
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wing Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1371
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Nylock Nuts - Macro Pacs
Type 18-8 stainless steel.
Part No: 1332BP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Nylock Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 1332
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Hex Nuts - Macro Pacs
Type 18-8 stainless steel.
Part No: 1307BP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Hex Nuts
Type 18-8 stainless steel.
Part No: 1307MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Barrel Nuts - Bulk Packs
Type 18-8 stainless steel.
Part No: 2987B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3205
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 821
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 2537
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 817
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Fine Thread - Phillips Machine Screws - Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 1492
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 820
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 2923
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 850
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 818
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Fine Thread - Phillips Machine Screws - Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 822A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Fine Thread - Phillips Machine Screws - Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3518A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Fine Thread - Phillips Machine Screws - Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 383A
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 819
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3090
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 2636
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 2683
|
|
|