Top Sellers
|
|
Spanner Wrench from GROCO
For use with Groco strainers and deck plates with holes up to 7" apart. Cast bronze with 1/4" dia. stainless steel pins on one side and 5/16" pins on the other. Made in USA.
|
110V AC Automatic Bilge Pump from RULE INDUSTRIES
The 1800gph pumping capacity and extra-long 24' power cord make this pump great for boats with shore power or protecting basements from flooding during wet weather. Motor and durable housing will last for years on the boat or in the home. 5/8" garden hose adapter. gph: 1800. Draw: 1. 1A@110V AC. Built-In Switch: Yes. Material: Plastic. Dimensions: 7-3/4" x 4-3/4". Port Size: 1-1/8".
|
|
|
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
|
Light Knives Illuminated Rigging Knife from MYERCHIN INC.
carry a Light Knife! It's dark, your hands are full and there's no way to hold a flashlight. The light is bright enough to let you read a chart 30 inches away, but because it's red it interferes less with your natural night vision. Stainless steel blade edge is 30% straight, 70% serrated for cutting nylon/polypro or tougher high-tech synthetic lines. Grip is ultralight Zytel® nylon. Secures to your belt or lifejacket with included clip. Serrated edge makes quick work of the toughest lines .
|
Premium 4-Cycle Heavy-Duty SAE 15W40 Engine Oil, Gallon from WEST MARINE
An excellent choice for all 4-cycle inboard diesel and gasoline engines operating in all conditions. Clean-burning formula meets or exceeds both industry and factory performance specifications. Powerful additives allow for dependable engine service.
|
PAR-Max 4 Water-System Pump, 12V from JABSCO
Flow rate: 16. 3 Litres/min (4. 3 gallons/min) Self-priming from dry up to 2. 4m (7. 8ft) Smooth flow. Dry running capability. Soft noise absorbing mounts. Snap-fit port fittings. Corrosion resistant materials. Meets USCG Regulation 183. 410 and ISO 8846 MARINE (ignition protection).
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
|
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Outboard Oil - SAE 10W-40 from WEST MARINE
With a higher number of performance-boosting additives than automotive oil, this synthetic blend meets and exceeds the needs of high-performance outboards. It's special formula protects outboards from friction damage and engine wear. Outstanding viscosity at low temperatures. Greater detergency. Resists engine build up. Exceeds all 4-stroke outboard requirements.
|
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.
|
|
4", Dia #4, Pack of 100 from FASCO FASTENERS
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3711
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws, Slotted Pan Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 306
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 571
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 527
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 613
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 477
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Slotted Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 340
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Oval Head
Type 18-8 stainless steel.
Part No: 0571MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0527MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0613MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 573
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 356
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws, Slotted Pan Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 308
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Slotted Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 342
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 479
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Oval Head
Type 18-8 stainless steel.
Part No: 0573MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0356MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0615MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 612
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 361
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 572
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 614
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 234
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 359
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Wood Screws - Flat Head Slotted - Bulk Packs
Type 18-8 Stainless Steel.
Part No: 272
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Round Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 196
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Wood Screws - Slotted Oval Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 236
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Finish Washers - Bulk Packs
Type 18-8 stainless steel.
Part No: 4898
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Brass Finish Washers - Bulk Packs
Brass screws are intended for brass fittings and decorative use.
Part No: 2004
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Machine Screws - Slotted Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 874
|
|
|