Top Sellers
#809 Notched Spreader from WEST SYSTEM
4'' x 4'' plastic spreader with 1/8'', 3/16'' and 1/4'' notches on three sides for quickly applying modified epoxy at a constant thickness.
|
Rocker Pump Faucet - Black from FYNSPRAY
Standard equipment on thousands of boats, this practical, rocker-action pump can be used with salt or freshwater. Ultra-simple design disassembles quickly. Plastic body, chrome-plated handle and spout. Material: Brass Capacity: 58 strokes per gallon. Dimensions: 6" above Clearance: 4 3/4" clearance below counter.
|
Circlips, Package of Five (5) from LEWMAR
Spares Kit, Single-Speed Winches For all single-speed winches less than 11 years old, includes 4 pawls, 4 pawl springs, 4 circlips. . Spares Kit, Two-Speed Winches For all two-speed and self-tailing winches to 16ST-66ST. Includes 2 circlips, 8 pawls, 12 pawl springs, 3 keys, 8 gear spindle sleeves, 2 collets . Spares Kit, Three-Speed Winches For all three-speed nonself-tailing winches to 65. Includes 4 circlips, 8 pawls, 18 pawl springs, 4 plungers, 6 plunger springs, 2 closing rings .
|
Nibo Quick Dog, Right-Locking with Hardware from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
Screen for Nibo 1070-10A Hatch from BOMAR
With these spare parts for your Nibo or Gray hatch, you can replace worn or damaged parts for a fraction of the cost of replacing the hatch. Low-Profile Gasket in a 9' length. 9/16" Gasket in a 10' length. Available for the 100 series: Riser Arm Male Hatch Knob Female Hatch Knob. Hatch Tiedown Dog. Left-Locking Quick Dog.
|
Replacement Delrin Roller, 2-1/2" Dia., 1-3/4 Width from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
|
Ultra Blue Three-Strand Line, 1/4" Dia., 1,700lb. Breaking Strength from SAMSON ROPE
Ultra-strong line outlasts polypro two to one Made from bi-polymer olefin fiber, ultra-strong Ultra Blue is 30%–35% stronger than polypropylene and has more than twice the wear life. UV light resistance is excellent, it is easy to grip and it floats.
|
500gph 12V Bilge Pump, 1.9A Draw at 12V DC, 3/4" Port, 4"H x 2-3/8"W from RULE INDUSTRIES
An internal computer chip cycles these pumps on every 2. 5 minutes, then quickly shuts them down if no water is detected. Built-in strainer bases snap off to make cleaning easy. Completely submersible, rust-proof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light. Small 500gph pump is designed to handle spray and rainwater. Built-In Switch: Yes, cycles every 2. 5 min.
|
PVC Coated Chain, Red, 1/4" x 4' from GREENFIELD PRODUCTS
Galvanized, proof-coil anchor chain is PVC coated to protect boat surfaces. Specially formulated PVC offers excellent flexibility and durability.
|
AC 36-Position Circuit Breaker Panel, 27 Circuit Breakers, 14-3/4" x 11-1/4" from BLUE SEA SYSTEMS
Blue Sea Systems designs innovative, reliable, superior quality electrical system products. Blue Sea Systems products are tested aboard the company's boat to ensure reliability and ease of use in real world conditions. This results in the delivery of innovative, reliable electrical products that exceed the quality standards of other companies. Blue Sea Systems' in-house lab is used to load test and thermal test products to ensure they will perform under marine conditions. Digital Multimeter.
|
Series 150 Clear PVC Tubing, 1/4"ID, 60psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
|
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
|
Series 150 Clear PVC Tubing, 1/2"ID, 45psi Burst Pressure from SHIELDS RUBBER
Single layer, nontoxic, FDA-approved clear vinyl tubing. Ideal for drain lines, iceboxes, refrigerators, livewells, bilge pump discharge, freshwater lines, water and holding tank vents. Sold per foot: 50’ maximum continuous length for 1/4" and 3/8" hose; 100' maximum continuous length for 1/2" hose and larger. Application: Non-pressurized water system supply; sink, shower, and icebox drains. Material: FDA formula vinyl. Reinforcement: None. Temperature Range: N/A.
|
Covered Waterproof Foot Switch from WEST MARINE
Hinged safety cover closes over the switch to prevent accidental operation. 150A continuous rating. 4'' dia. Cutout: 2. 5'' dia.
|
|
4", Dia #4, Length 4", Pack of 100 from FASCO FASTENERS
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws, Slotted Pan Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 2864
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3691B
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 4611
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 4520
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 4610
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Metric Machine Screws - Phillips Pan Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 4519
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Pan Head
Type 18-8 stainless steel.
Part No: 528
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 574
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 3711
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws, Slotted Pan Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 306
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 571
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 527
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 613
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 477
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Slotted Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 340
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Oval Head
Type 18-8 stainless steel.
Part No: 0571MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0527MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0613MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 573
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 356
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws, Slotted Pan Head, Bulk Packs
Type 18-8 stainless steel.
Part No: 308
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Slotted Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 342
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 479
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Oval Head
Type 18-8 stainless steel.
Part No: 0573MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Pan Head
Type 18-8 stainless steel.
Part No: 0356MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Retail Packs & Kits->Tapping Screws - Phillips Flat Head
Type 18-8 stainless steel.
Part No: 0615MP
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Flat Head - Bulk Packs
Type 18-8 stainless steel.
Part No: 612
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Tapping Screws - Phillips Pan Head - Bulk
Type 18-8 stainless steel.
Part No: 361
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners -> Fasteners (100 Pk Bagged)->Tapping Screws - Phillips Oval Head - Bulk
Type 18-8 stainless steel.
Part No: 572
|
|
|
|
Home -> Fasteners -> Mechanical Fasteners->Bulk Pak Slotted Flat Head Tapping Screws
Type 18-8 stainless steel.
Part No: 614
|
|
|